Skip to main content
Advanced Search

Filters: Tags: San Clemente Dam (X)

4 results (7ms)   

View Results as: JSON ATOM CSV
thumbnail
This dataset contains the easting, northing and elevation values of the river right and river left endpoints from four to six survey transects at each of 10 sites along the Carmel River, central California. Topographic surveys were completed during four summer surveys (in 2013, 2015, 2016 and 2017). See https://www.sciencebase.gov/catalog/item/5a2720a6e4b03852bafc8eaf for accompanying elevation measurements. All data were collected in NAD83 UTM10N horizontal coordinates and NAVD88 Geoid 12B vertical coordinates, in units of meters.
thumbnail
This data provides river turbidity measurements collected on the Carmel River, CA. Turbidity was measured to study any changes in the Carmel River’s sediment loads following the removal of the San Clemente Dam. The USGS-run DTS-12 turbidity sensor was deployed above the Sleepy Hollow Weir on the Carmel River, CA (instrument was located at 36.445250 degrees North, 121.710494 degrees West). Deployment began on December 9, 2014. After June 16, 2016, the instrument was removed for calibration. A new instrument was re-deployed on October 14, 2016, and continued to record until recovery on July 13, 2017. Due to the instrument removal and calibration, there exists an approximately 4-month long gap in data collection from...
thumbnail
Topographic surveys were completed during four summer surveys (in 2013, 2015, 2016 and 2017) at 10 sites along the Carmel River, CA. Topographic measurements were made at multiple locations along four to six transects per site using a total station (at sites CR, RS, DM and SH) and with an auto level and survey rod (at sites DDU, DDL, BW, SR, SC and CRO). This dataset contains the cross-sectional elevation measurements for each transect and survey year. The elevation measurement locations along each transect were located by measuring distances between corresponding endpoint coordinates, starting from river left (see https://www.sciencebase.gov/catalog/file/get/5a271f8ce4b03852bafc8eaa for transect endpoint locations)....
thumbnail
Pebble count data were collected during four summer surveys (2013, 2015, 2016 and 2017) at ten sites along the Carmel River, CA. Grain-size measurements were made at four to six transects per site using a 0.5 by 0.5 m sampling frame, with 100 counts per transect. Each transect was defined by coordinates on the left and right sides of the river, and grain sizes were measured at points between those endpoint coordinates (see accompanying file at https://www.sciencebase.gov/catalog/item/5a271f8ce4b03852bafc8eaa for transect endpoint coordinates). Grain-size diameters were measured using a gravelometer, where we recorded the largest sieve size on the gravelometer that an individual particle did not pass through, similar...


    map background search result map search result map Grain size data from the Carmel River, central California, 2013 to 2017 Turbidity data from the Carmel River, central California, 2014 to 2017 Survey transect endpoint coordinates along the Carmel River, central California, 2013 to 2017 Survey transect data along the Carmel River, central California, 2013 to 2017 Grain size data from the Carmel River, central California, 2013 to 2017 Survey transect endpoint coordinates along the Carmel River, central California, 2013 to 2017 Survey transect data along the Carmel River, central California, 2013 to 2017