Filters: Tags: Saratoga County (X) > Categories: Data (X)
3 results (51ms)|
Filters
Date Range
Extensions Types
Contacts
Tag Types
|
From July through December 2016, 56 environmental samples were collected from the Mohawk and Western New York River Basins. Samples were collected from nine production wells and 13 domestic wells in the Mohawk River Basin, and 17 production wells and 17 domestic wells in the Western New York River Basins. Samples were collected and processed using standard USGS methods and analyzed for 320 constituents including physicochemical properties, dissolved gases, major ions, nutrients, trace elements, pesticides, volatile organic compounds, radionuclides, and indicator bacteria. Analytical methods are described and referenced in Gaige and others (2023). Five of the Mohawk River Basin wells (HE 622, HE 624, OE1468, SA1501,...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Albany County,
Allegany County,
Ambient Monitoring,
Cattaraugus County,
Chautauqua County,
From May to December 2017, 48 environmental samples and six quality control samples were collected throughout the Upper Hudson and Central New York River Basins. Samples were collected from nine production wells and 11 domestic wells in the Upper Hudson River Basin, and 14 production wells and 14 domestic wells in the Central New York River Basin. Of the total wells sampled, 22 were completed in bedrock and 26 were completed in sand and gravel. Approximately 20 percent of samples were collected from wells that were previously sampled as in 2007 and 2012. Groundwater samples were collected prior to any treatment or filtration systems, from existing domestic and production wells equipped with permanently installed...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Ambient Monitoring,
Cayuga County,
Central New York River Basin,
Essex County,
Fulton County,
From 2010 through 2019, the U.S. Geological Survey, in cooperation with the New York State Department of Environmental Conservation, collected horizontal-to-vertical seismic soundings at 100 locations in upstate New York and 1 location in Susquehanna County, Pennsylvania to evaluate the technique (control-point measurements) and to support aquifer-mapping projects (Heisig, 2012, 2015). The HVSR technique, commonly referred to as the passive-seismic method, is used to estimate the thickness of unconsolidated sediments and the depth to bedrock (Lane and others, 2008; Fairchild and others, 2013). The passive-seismic method uses a single, broad-band three-component (two horizontal and one vertical) seismometer to record...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Aquifer,
Aquifer Mapping,
Basin & Hydrogeologic Characterization,
Broome County,
Chenango County,
|
|
