Skip to main content
Advanced Search

Filters: Tags: Specific conductance (X) > Categories: Data (X)

99 results (653ms)   

View Results as: JSON ATOM CSV
thumbnail
A vented conductivity, temperature and depth sensor (CTD, InSitu Aqua Troll) was installed at site NR1 (N 47° 04’ 16.1”/W 122° 42’ 15.5”) and continuously measured water temperature, water depth, specific conductance, and salinity at 15-minute intervals from February 11, 2016 to July 18, 2016 (159 days). The sensor was replaced with a vented water-level logger (InSitu Level Troll) on July 19, 2016 and deployed until March 19, 2018 (608 days). The site is tidally influenced and located approximately 4.1 km upstream from the mouth of the Nisqually River and within the tidal prism. The elevation (NAVD88) of the top of the deployment pipe was surveyed by RTN-GPS. Tape-down measurements from the top of the pipe to the...
thumbnail
The file "Chloride_specific_conductance_regression_model_forms_for_estimating_high-frequency_chloride_concentrations.csv" contains the regression equation forms for two types of regressions: 1) single linear (SLR) and 2) piecewise (or segmented; SEG) regression between specific conductance (SC) and chloride (Cl) concentrations for 56 USGS water-quality monitoring stations across the eastern United States, plus four regional regressions developed by pooling data for sites within a region (see Moore and others (in review) for more information). Some sites, and all regions, have both SLR and SEG models reported in this table. The analysis included in the Moore and others (in review) study used results from the SLR...
thumbnail
Slug additions are often the most accurate method for determining discharge when traditional current meter or acoustic measurements are unreliable because of high turbulence, rocky streambed, shallow or sheet flow, or the stream is physically inaccessible (e.g., under ice or canyon walls) or unsafe to wade (Zellweger et al., 1989, Kilpatrick and Cobb 1984, Ferranti 2015). The slug addition method for determining discharge requires an injection of a known amount of a single salt and high-frequency downstream measurement of solute concentration to capture the response curve (Kilpatrick and Cobb 1984). A new slug method was developed to determine stream discharge utilizing specific conductance and ionic molal conductivities...
thumbnail
This child item data set provides high-resolution, nearshore, spatial water-quality data collected from Owasco Lake, New York, on June 26 and October 8, 2019. All data are reported as raw measured values. Continuous water-quality monitors were mounted to a boat at approximately 0.5-meters below the water surface and used to measure nitrate, chlorophyll fluorescence (fChl), fluorescent dissolved organic matter (fDOM), dissolved oxygen, specific conductance, phycocyanin fluorescence (fPC), turbidity, pH, and temperature.
thumbnail
Water velocities and water-quality constituents were measured along planned survey lines, which were generally perpendicular to the shoreline and spaced 100 meters apart, over an approximately 2.3-mile section of nearshore Lake Erie on June 10-12, 2019 (survey 1), and August 19-21, 2019 (survey 2), using a 1200 kHz acoustic Doppler current profiler (ADCP), a YSI 6920 V2 multiparameter sonde, and a YSI EcoMapper autonomous underwater vehicle (AUV). Water-quality data collected in this area included near-surface and three-dimensional measurements of water temperature, specific conductance, pH, dissolved oxygen, turbidity, chlorophyll, and phycocyanin (blue-green algae). The data were geo-referenced with an integrated...
thumbnail
The datasets provided here are the input data used to run the Seasonal Kendall Trend (SKT) tests and Weighted Regressions on Time, Discharge, and Season (WRTDS) models. SKT tests use "annualSamplingFreqs_allSites.csv" and "wqData_screenedSitesAll.csv" which includes, for all site-parameter combinations, information on annual sampling frequencies and the screened water-quality data, respectively. The WRTDS models use "DRB.wqdata.20200521.csv", "DRB.flow.20200610.zip", and "DRB.info.20200521.csv" for calibration which includes, for all site-parameter combinations, the water-quality data, streamflow data (as separate .csv files for each site), model specifications and site information, respectively. The multisource...
thumbnail
This U.S. Geological Survey (USGS) Data Release provides spatial water-quality data collected from Milford Lake, Kansas, on May 26, June 9, July 14, July 21, and September 15, 2016. All data are reported as raw measured values and are not rounded to USGS significant figures. Continuous water-quality monitors were used to measure water temperature, specific conductance, turbidity, pH, chlorophyll, phycocyanin, dissolved oxygen, and fluorescent dissolved organic matter (fDOM) at thirty-second intervals at depths of 0.5- and 1.5-meters throughout the lake.
thumbnail
A vented conductivity, temperature and depth sensor (CTD, InSitu Aqua Troll) was installed at site NR3 (N 47° 05’ 12”/W 122° 42’ 22”) and continuously measured water level, water temperature, specific conductance, and salinity at 15-minute intervals from February 12, 2016 to August 7, 2016 (177 days) and from October 7, 2016 to February 8, 2017 (124 days). This site is tidally influenced and located approximately 2.2 km upstream from the mouth of the Nisqually River. Elevation (NAVD88) of the deployment pipe was surveyed by RTN-GPS. Elevation of pipe plus distance to sensor is included in the offset. The offset needed to convert water depth to NAVD88 water surface elevation is -0.31 meters. . Water depth of the...
thumbnail
This data set includes estimated chloride concentrations for the 93 USGS water quality monitoring stations located across the eastern United States. Chloride concentrations were predicted using regression equations that established the relationship between simultaneous measurements of chloride and specific conductance (SC). Site-specific models were developed and applied when data were available, and regional regression models were used where there were insufficient data available to establish a site-specific regression model. These models were applied to high-frequency SC data sets to produce high-frequency predicted chloride concentrations at 2-minute to 1-hour intervals, depending on the frequency at which SC...
thumbnail
This product consists of one tabular dataset and associated metadata of water quality information related to rivers, streams, and reservoirs in the Upper Mississippi River watershed between 2012 and 2016. This data release is a part of a national assessment of freshwater aquatic carbon fluxes. Data consist of organic and inorganic carbon related species, carbon dioxide and methane gas fluxes calculated from manual chamber measurements, nitrogen species, carbon isotopes, oxygen isotopes, cations, anions, trace metals, and various in situ measurements including: pH, water temperature, air temperature, barometric pressure, dissolved oxygen, turbidity, fluorescent dissolved organic matter, and specific conductance....
Categories: Data, Project; Types: Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: Carbon, Fluorescent Dissolved Organic Matter (fDOM), Minnesota, Shingobee, Shingobee Headwaters Aquatic Ecosystems Project, All tags...
thumbnail
Sample and Specific Conductance Monitoring Site Near the USGS stream gage 06191500 (Latitude N 45°06'43.63", Longitude W 110°47'37.20", NAD83). Methods Specific Conductance Data An In-Situ Aqua Troll 100 Data Logger was used to measure and store specific conductance measurements. Specific conductance measurements were made every 15 minutes. The specific conductance monitoring data were periodically checked against discrete measurements. The hand-held field meter used for discrete measurements and the continuous specific conductance probe were calibrated using NIST traceable standards and measurements were made following the procedure described in the USGS National Field Manual (USGS, 2015). Water Quality Data...
thumbnail
The U.S. Geological Survey (USGS) and the National Park Service (NPS) have collaborated on monitoring the chloride flux in the major rivers of Yellowstone National Park by periodically sampling the rivers and analyzing chloride concentrations in discrete water samples since the 1970's. However, restrictions of winter travel, great distances between sites, and sampling and analytical costs have limited collection to approximately 28 samples per site annually. Electrical conductivity data can be used as a proxy for chloride concentrations in many of the major rivers of Yellowstone National Park. Electrical conductivity is a measure of the ability of water to pass an electrical current, and it is affected by the presence...
thumbnail
Sample and Specific Conductance Monitoring Site Near the USGS stream gage 06036940 (Latitude N 44°43'57.81", Longitude W 110°42'47.71", NAD83). Methods Specific Conductance Data An In-Situ Aqua Troll 100 Data Logger was used to measure and store specific conductance measurements. Specific conductance measurements were made every 15 minutes. The specific conductance monitoring data were periodically checked against discrete measurements. The hand-held field meter used for discrete measurements and the continuous specific conductance probe were calibrated using NIST traceable standards and measurements were made following the procedure described in the USGS National Field Manual (USGS, 2015). Water Quality Data...
thumbnail
This dataset contains climate, road salt application, physical, and land cover characteristics summarized for watersheds upstream of 93 USGS stream gages. Data were summarized by watershed using geographic information system software. The dataset consists of one comma-separated variable table.
thumbnail
This U.S. Geological Survey (USGS) data release provides water-quality data collected from the Caloosahatchee River and 12 fiberglass tanks located within the Caloosahatchee River. The tanks were open to the atmosphere, and were closed to the river. Tanks were filled with native water within 1-2 hours prior to the first profile collected on May 6, July 8, and September 16. Nutrients were added at approximately 12:00 p.m. on May 6, 11:45 a.m. on July 8, and 11:00 a.m. on September 16. Sodium nitrate was added for the nitrate treatments, sodium phosphate was added for the phosphate treatments, and ammonium hydroxide was added for the ammonium treatments. Nutrient samples were collected and processed by Nova Southeastern...
thumbnail
Velocity and water-quality surveys were completed along an approximately 71-mile reach of the Ohio River between Markland Locks and Dam (river mile 531.5) and McAlpine Locks and Dam (river mile 606.8) on October 27–November 4, 2016 (survey #1), and June 26–29, 2017 (survey #2). Water-quality data collected in this reach included surface measurements and vertical profiles of water temperature, specific conductance, pH, dissolved oxygen, turbidity, chlorophyll, and phycocyanin. Streamflow and velocity data were collected simultaneous to the water-quality data at cross-sections and along longitudinal lines (corresponding to the water-quality surface measurements) and at selected stationary locations (corresponding...
thumbnail
Velocity and water-quality surveys were completed along an approximately 71-mile reach of the Ohio River between Markland Locks and Dam (river mile 531.5) and McAlpine Locks and Dam (river mile 606.8) on October 27–November 4, 2016 (survey #1), and June 26–29, 2017 (survey #2). Water-quality data collected in this reach included surface measurements and vertical profiles of water temperature, specific conductance, pH, dissolved oxygen, turbidity, chlorophyll, and phycocyanin. Streamflow and velocity data were collected simultaneous to the water-quality data at cross-sections and along longitudinal lines (corresponding to the water-quality surface measurements) and at selected stationary locations (corresponding...
thumbnail
An upward-looking acoustic Doppler velocity meter (ADVM; Sontek XR, 1.5 MHz) was deployed in McAllister Creek at site MC2 (N 47° 05’ 43”/W 122° 43’ 38”) and continuously recorded water velocity, temperature and water level at 5-minute intervals from September 26, 2016 to October 14, 2016 (18 days), and at 15-minute intervals from December 2, 2016 to May 25, 2017 (174 days) except for the period of March 6 – 11, 2017 when the sensor was removed for maintenance and battery replacement. The site is tidally influenced and located approximately 0.7 km upstream from the mouth of McAllister Creek. The measurement averaging interval for the ADVM was 60 s. The blanking distance was set at 0.5 m and the cell end was set at...
thumbnail
This U.S. Geological Survey (USGS) Data Release provides spatial water-quality data collected from the St. Lucie and Caloosahatchee Rivers in October 2017, Lake Okeechobee and the Caloosahatchee River in July 2018 and the Caloosahatchee River, St. Lucie River and Lake Okeechobee in August of 2018, south Florida. Geo-referenced measurements of near surface water temperature, specific conductance, dissolved oxygen, pH, turbidity, chlorophyll fluorescence, phycocyanin fluorescence, and fluorescence of dissolved organic matter were recorded at 5 second intervals and nitrate+nitrite was recorded at 1 minute intervals during water-quality surveys in order to create high resolution water-quality maps of the study area.
thumbnail
This data release provides data for filter-passing total mercury, filter-passing methylmercury, particulate total mercury, particulate methylmercury, and dissolved organic carbon concentrations calculated for USGS station 254543080405401: Tamiami Canal at S-12D Near Miami, FL. Five site-specific regression models were developed using continuously measured temperature, turbidity, specific conductance and or fluorescence of chromophoric dissolved organic matter and concomitant discretely collected dissolved organic carbon samples to calculate continuous concentrations of mercury and carbon.


map background search result map search result map Electrical Conductivity Data for the Snake River, Yellowstone National Park and Grand Teton National Park Milford Lake, Kansas spatial water-quality data, May 26, June 9, July 14, July 21, and September 15, 2016 Water quality, quantity, and gas fluxes of the Upper Mississippi River basin (WY 2012-2016) Water Data for Nisqually River at Site NR1 Water Data for Nisqually River at Site NR3 Water Data for McAllister Creek at Site MC2 (ver. 1.1, December 2019) Tantalus Creek, site number 06036940 Estimated high-frequency chloride concentrations Chloride-specific conductance regression model forms for estimating high-frequency chloride concentrations Watershed characteristics for selected stream gages Near-Surface Spatial Water-Quality Surveys along the St. Lucie and Caloosahatchee Rivers in October 2017, Lake Okeechobee and Caloosahatchee River in July 2018, and Caloosahatchee River, St. Lucie River and Lake Okeechobee in August of 2018, south Florida (ver. 1.1, December 2020) Yellowstone River at Corwin Springs, site number 06191500 Calculated mercury and carbon concentrations, USGS station 254543080405401: Tamiami Canal at S-12D Near Miami, Florida, 2013-2017 Water-quality profiles within the Caloosahatchee River and twelve fiberglass tanks, during experimental nutrient addition treatments, 2019 Water-quality trends for rivers and streams in the Delaware River Basin using Weighted Regressions on Time, Discharge, and Season (WRTDS) models, Seasonal Kendall Trend (SKT) tests, and multisource data, Water Year 1978-2018 (input data) Velocity measurements collected along cross-section lines (transects) in the Ohio River between Markland Locks and Dam and McAlpine Locks and Dam, Kentucky and Indiana, October 27–November 4, 2016 (survey #1) Water-quality measurements (at depths) collected at stationary locations (verticals) in the Ohio River between Markland Locks and Dam and McAlpine Locks and Dam, Kentucky and Indiana, June 26–29, 2017 (survey #2) Velocity surveys and three-dimensional point measurements of basic water-quality constituents in nearshore Lake Erie in the vicinity of Villa Angela Beach and Euclid Creek, Cleveland, Ohio, June 10–12, 2019, and August 19–21, 2019 Owasco Lake, New York spatial water-quality data, June 26 and October 8, 2019 Specific conductance data collected during slug additions Water Data for McAllister Creek at Site MC2 (ver. 1.1, December 2019) Water-quality profiles within the Caloosahatchee River and twelve fiberglass tanks, during experimental nutrient addition treatments, 2019 Calculated mercury and carbon concentrations, USGS station 254543080405401: Tamiami Canal at S-12D Near Miami, Florida, 2013-2017 Tantalus Creek, site number 06036940 Yellowstone River at Corwin Springs, site number 06191500 Water Data for Nisqually River at Site NR3 Velocity surveys and three-dimensional point measurements of basic water-quality constituents in nearshore Lake Erie in the vicinity of Villa Angela Beach and Euclid Creek, Cleveland, Ohio, June 10–12, 2019, and August 19–21, 2019 Owasco Lake, New York spatial water-quality data, June 26 and October 8, 2019 Milford Lake, Kansas spatial water-quality data, May 26, June 9, July 14, July 21, and September 15, 2016 Velocity measurements collected along cross-section lines (transects) in the Ohio River between Markland Locks and Dam and McAlpine Locks and Dam, Kentucky and Indiana, October 27–November 4, 2016 (survey #1) Water-quality measurements (at depths) collected at stationary locations (verticals) in the Ohio River between Markland Locks and Dam and McAlpine Locks and Dam, Kentucky and Indiana, June 26–29, 2017 (survey #2) Near-Surface Spatial Water-Quality Surveys along the St. Lucie and Caloosahatchee Rivers in October 2017, Lake Okeechobee and Caloosahatchee River in July 2018, and Caloosahatchee River, St. Lucie River and Lake Okeechobee in August of 2018, south Florida (ver. 1.1, December 2020) Water-quality trends for rivers and streams in the Delaware River Basin using Weighted Regressions on Time, Discharge, and Season (WRTDS) models, Seasonal Kendall Trend (SKT) tests, and multisource data, Water Year 1978-2018 (input data) Water quality, quantity, and gas fluxes of the Upper Mississippi River basin (WY 2012-2016) Specific conductance data collected during slug additions Estimated high-frequency chloride concentrations Chloride-specific conductance regression model forms for estimating high-frequency chloride concentrations Watershed characteristics for selected stream gages