Filters: Tags: State of Oregon (X)
43 results (384ms)|
Filters
Date Range
Extensions Types Contacts
Categories Tag Types Tag Schemes |
Introduction High-resolution swath bathymetry and backscatter were collected in the mouth of the Columbia River (MCR) as part of the Office of Naval Research (ONR) funded River and Inlet Dynamics Experiment in 2013. The goal of the U.S. Geological Survey’s component of the research was to evaluate the various hydrodynamic and sediment transport processes in the Columbia River estuary entrance using a combination of field observations coupled with Delft3D model simulations. The MCR is a dynamic estuary inlet with large waves, large tidal currents, and a significant river discharge, resulting in strong estuarine circulation. The field component of the study consisted of an intensive in-situ experiment including bottom-mounted...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Backscatter,
Bathymetry,
CMG,
CMGP,
Coastal and Marine Geology Program,
This part of the USGS data release presents bathymetry data for the Columbia River Mouth, Oregon and Washington. The bathymetry data of the Columbia River Mouth, Oregon and Washington were collected by the U.S. Geological Survey (USGS). Mapping was completed in 2013, using a 234-kHz SEA SWATHPlus interferometric system. These data are not intended for navigational purposes.
This data release contains data from the USGS survey of the Oregon OCS Floating Wind Farm Site in 2014.The bathymetry and shaded-relief rasters were generated from bathymetry data collected by USGS during the period from August 20 to September 1, 2014. using a Reson 7111 multibeam echosounder. The mapping mission collected bathymetry data from about 163 m to 566 m depths on the Oregon outer continental shelf. The acquisition was funded by the U.S. Bureau of Ocean Energy Management.
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: BOEM,
Bathymetry,
Bathymetry and Elevation,
Bureau of Ocean Energy Management,
Coos Bay,
This data release contains data from the USGS survey of the Oregon OCS Floating Wind Farm Site in 2014.The shaded-relief raster was generated from bathymetry data collected by USGS during the period from August 20 to September 1, 2014. using a Reson 7111 multibeam echosounder. The mapping mission collected bathymetry data from about 163 m to 566 m depths on the Oregon outer continental shelf. The acquisition was funded by the U.S. Bureau of Ocean Energy Management.
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: BOEM,
Bathymetry,
Bathymetry and Elevation,
Bureau of Ocean Energy Management,
Coos Bay,
This biotope raster is part of a data release of the Oregon outer continental shelf (OCS) proposed wind farm map site. The biotopes mapped in this area have been numbered to indicate combinations of seafloor hardness, ruggedness and depth associated with biotopes derived by analysis of video data as described in the accompanying Open-File Report (Cochrane and others, 2017). The map was created using video and multibeam echosounder bathymetry and backscatter data collected in 2014 and processed in 2015 (Cochrane and others, 2015). Cochrane, G.R., Dartnell, P., Hemery, L.G., and Hatcher, G., 2015, Data release for USGS field activity 2014-607-FA, Oregon OCS seafloor mapping; selected lease blocks relevant to renewable...
Categories: Data;
Types: Citation,
Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: BOEM,
Bureau of Ocean Energy Management,
CMECS,
CMGP,
Coastal and Marine Geology Program,
This portion of the data release presents topographic point clouds of the ocean beach at Fort Stevens State Park, OR, and Benson Beach at Cape Disappointment State Park, WA. The point clouds were derived from structure-from-motion (SfM) processing of aerial imagery collected with unoccupied aerial systems (UAS) on during low tide surveys on 7 and 8 August 2017. The point clouds from each survey are tiled into 1000 by 1000 meter tiles to reduce individual file sizes. The Fort Stevens point clouds have a total of 271,915,544 points, with an average point density of 407 points per-square meter and an average point spacing of 5 centimeters. The Benson Beach point clouds have a total of 301,569,130 points, with an average...
Categories: Data;
Tags: Bathymetry and Elevation,
Benson Beach,
CHMRP,
Cape Disappointment,
Clatsop County,
Geo-referenced digital imagery of in-situ seafloor sediments in the mouth of the Columbia River was collected and analyzed to determine median grain size of the surface sediments. Digital imagery of the seafloor was collected with a “flying eyeball” (Rubin and others, 2007) from the R/V Parke Snavely from September 11 to September 13, 2014 (USGS Field Activity 2014-642-FA). The flying eyeball consists of a standard definition plumbing inspection video camera and LED light ring inserted in a 50 kg wrecking ball. The video camera has a resolution of 480 by 720 pixels with a resolution of 0.009 mm/pixel when the target is flush against the exterior surface of the lens. Sample locations were chosen to allow for the...
Categories: Data;
Types: Citation,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Columbia River,
Marine Geology,
State of Oregon,
State of Washington,
Substrate,
These data depict littoral cells along the West Coast of the United States, as segments of the shoreline of Washington, Oregon, and California. A littoral cell is a reach of the coast that is isolated sedimentologically from adjacent coastal reaches and that features its own sources and sinks. Isolation is typically caused by protruding headlands, submarine canyons, inlets and some river mouths that prevent littoral sediment from one cell to pass into the next (Beachapedia). The data are a compilation of existing data sources from Washington Department of Ecology (WDOE), Oregon Coastal Management Program (OCMP), and California Coastal Sediment Management Workgroup (CSMW). There is companion data set with the same...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: State of California,
State of Oregon,
State of Washington,
West Coast,
drift cells,
This part of the Oregon OCS Data Release presents geological observations from video collected on cruise 2014-607-FA in the Floating Wind Farm survey area. The survey was conducted using 12 hour day operations out of Charleston Harbor near Coos Bay, Oregon. The cruise plan consisted of 23 days on site split between sonar mapping and video ground truth surveying. Activities parsed out to nine days of sonar mapping, three days of video surveying, eight days of no operations due to weather, and three days mobilizing and demobilizing (table 1). Typically the Snavely would transit out to the survey area in an hour at a speed of 20 knots. Marine Mammal observations were made during the multibeam sonar mapping portion...
This portion of the data release presents digital surface models (DSM) of the ocean beach at Fort Stevens State Park, OR, and Benson Beach at Cape Disappointment State Park, WA. The DSMs have resolutions of 10 centimeters per pixel and were derived from structure-from-motion (SfM) processing of aerial imagery collected with unoccupied aerial systems (UAS) during low tides on 22 and 23 July 2021. Unlike a digital elevation model (DEM), the DSMs represent the elevation of the highest object within the bounds of a cell. Vegetation, buildings, and other objects have not been removed from the data. The raw imagery used to create the DSMs was acquired with a UAS fitted with a Ricoh GR II digital camera featuring a global...
Categories: Data;
Tags: Bathymetry and Elevation,
Benson Beach,
CHMRP,
Cape Disappointment,
Clatsop County,
This portion of the data release presents topographic point clouds of the ocean beach at Fort Stevens State Park, OR, and Benson Beach at Cape Disappointment State Park, WA. The point clouds were derived from structure-from-motion (SfM) processing of aerial imagery collected with unoccupied aerial systems (UAS) on 2017-11-01 during low tide surveys on 22 and 23 July 2021. The point clouds from each survey are tiled into 500 by 500 meter tiles to reduce individual file sizes. The Fort Stevens point clouds have a total of approximately 496 million points, with an average point density of 386 points per-square meter and an average point spacing of 5 centimeters. The Benson Beach point clouds have a total of approximately...
Categories: Data;
Tags: Bathymetry and Elevation,
Benson Beach,
CHMRP,
Cape Disappointment,
Clatsop County,
This portion of the data release presents high-resolution orthomosaic images of the ocean beach at Fort Stevens State Park, OR, and Benson Beach at Cape Disappointment State Park, WA. The orthomosaics have resolutions of 5 centimeters per pixel and were derived from structure-from-motion (SfM) processing of aerial imagery collected with unoccupied aerial systems (UAS) during low tide surveys on 7 and 8 August 2017. The raw imagery used to create the orthomosaics was acquired with a UAS fitted with a Ricoh GR II digital camera featuring a global shutter. The UAS was flown on pre-programmed autonomous flight lines spaced to provide approximately 70 percent overlap between images from adjacent lines. The camera was...
Categories: Data;
Tags: Bathymetry and Elevation,
Benson Beach,
CHMRP,
Cape Disappointment,
Clatsop County,
This part of the USGS data release presents acoustic backscatter data for the Columbia River Mouth, Oregon and Washington. The acoustic backscatter data of the Columbia River Mouth, Oregon and Washington were collected by the U.S. Geological Survey (USGS). Mapping was completed in 2013, using a 234-kHz SEA SWATHPlus interferometric system. These data are not intended for navigational purposes.
A three-dimensional hydrodynamic model of the lower Columbia River (LCR) was constructed using the Delft3D Flexible Mesh (DFM) modeling suite to simulate water levels, flow, and seabed stresses between January 1, 2017, and April 20, 2020. This data release describes the construction and validation of the model application and provides input files suitable to run the model on Delft3D Flexible Mesh software version 2021.01. Model Description The model application was adapted from van der Steeg (2016) and Wherry and others (2019). The model domain extends between the Bonneville Dam at its upstream limit to about 130 km offshore of the river mouth in the Pacific Ocean (fig. 1). Ten equally spaced vertical sigma layers...
Accurate and consistent estimates of shrubland ecosystem components are crucial to a better understanding of ecosystems condition in arid and semiarid lands. We developed an innovative approach by integrating multiple information to quantify shrubland components as continuous field products within the National Land Cover Database (NLCD). The approach consists of five major parts: field sample collection, high-resolution mapping of shrubland components using WorldView-2 imagery and regression tree models, Landsat 8 radiometric balancing and phenological mosaicking, coarse resolution estimate of shrubland components across a large geographic extent using Landsat 8 phenological mosaics and regression tree models, and...
Accurate and consistent estimates of shrubland ecosystem components are crucial to a better understanding of ecosystems condition in arid and semiarid lands. We developed an innovative approach by integrating multiple information to quantify shrubland components as continuous field products within the National Land Cover Database (NLCD). The approach consists of five major parts: field sample collection, high-resolution mapping of shrubland components using WorldView-2 imagery and regression tree models, Landsat 8 radiometric balancing and phenological mosaicking, coarse resolution estimate of shrubland components across a large geographic extent using Landsat 8 phenological mosaics and regression tree models, and...
This data release contains data from the USGS field activity 2014-607-FA, a survey of the Oregon Outer Continental Shelf (OCS) Floating Wind Farm Site in 2014.The bathymetry raster was generated from bathymetry data collected by U.S. Geological Survey (USGS) during the period from August 20 to September 1, 2014 using a Reson 7111 multibeam echosounder. The mapping mission collected bathymetry data from about 163 m to 566 m depths on the Oregon outer continental shelf. The acquisition was funded by the U.S. Bureau of Ocean Energy Management. Contours were generated using the ESRI Contour tool in spatial analysit. The contour interval is 10 meters.
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Backscatter,
Bathymetry,
Bathymetry and Elevation,
CMGP,
Coos Bay,
This portion of the data release presents digital surface models (DSM) of the ocean beach at Fort Stevens State Park, OR, and Benson Beach at Cape Disappointment State Park, WA. The DSMs have resolutions of 10 centimeters per pixel and were derived from structure-from-motion (SfM) processing of aerial imagery collected with unoccupied aerial systems (UAS) during low tides on 7 and 8 August 2017. Unlike a digital elevation model (DEM), the DSMs represent the elevation of the highest object within the bounds of a cell. Vegetation, buildings, and other objects have not been removed from the data. The raw imagery used to create the DSMs was acquired with a UAS fitted with a Ricoh GR II digital camera featuring a global...
Categories: Data;
Tags: Bathymetry and Elevation,
Benson Beach,
CHMRP,
Cape Disappointment,
Clatsop County,
This portion of the USGS data release presents bathymetry data collected during surveys performed in Floras Lake, Oregon in June 2018 (USGS Field Activity Number 2018-636-FA). Floras Lake is a coastal lake in southern Oregon that is separated from the Pacific Ocean by sand dunes. It is not influenced by tides, although water levels fluctuate seasonally. Lake bed bathymetry data were collected using two personal watercraft (PWCs) equipped with single-beam sonar systems and global navigation satellite system (GNSS) receivers. The sonar systems consisted of an Odom Echotrac CV-100 single-beam echosounder and 200 kHz transducer with a 9-degree beam angle. Depths from the lakebed to the echosounder were calculated using...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Bathymetry and Elevation,
CMHRP,
Cape Blanco,
Coastal and Marine Hazards and Resources Program,
Curry County,
This portion of the USGS data release presents acoustic-backscatter data collected during surveys performed in Floras Lake, Oregon in June 2018 (USGS Field Activity Number 2018-636-FA). Lake bed backscatter data were collected using a personal watercraft (PWC) equipped with a sidescan sonar system and global navigation satellite system (GNSS) receivers. The sonar system consisted of a Tritech Starfish 990F with a 1-MHz transducer and a 0.3-degree horizontal beam width. Output from the GNSS receivers and sonar system were combined in real time on the PWC by a computer running HYPACK hydrographic survey software. Navigation information was displayed on a video monitor, allowing PWC operators to navigate along survey...
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: CMHRP,
Cape Blanco,
Coastal and Marine Hazards and Resources Program,
Curry County,
Echo Sounders,
|
|
