Filters: Tags: State of Washington (X)
83 results (44ms)|
Filters
Date Range
Extensions Types Contacts
Categories Tag Types
|
This portion of the data release presents sediment grain-size data from samples collected in the Elwha River estuary, Washington, in July 2013 and June 2014 (USGS Field Activities L-15-13-PS and 2014-628-FA). Surface sediment was collected from one location in 2013 and five locations in 2014 using a using a push core. The locations of grab samples were determined with a hand-held global positioning system (GPS). The cores were split into one- to three-centimeter sections. The grain-size distributions of samples were determined using standard techniques developed by the USGS Pacific Coastal and Marine Science Center sediment lab. Size fractions are defined as gravel (> 2 mm), sand (63 micron to 2 mm), silt (4 micron...
Categories: Data;
Types: Citation;
Tags: Clallam County,
Elwha River,
Olympic Peninsula,
State of Washington,
Strait of Juan de Fuca,
This portion of the data release presents aquatic invertebrate abundance data from samples collected in the Elwha River estuary, Washington, in 2007 and 2013 (no associated USGS Field Activities numbers because data were collected predominantly by biologists from the Lower Elwha Klallam Tribe). Replicate benthic samples were collected at 18 locations throughout the estuary complex using a petite Ponar grab sampler (appx. 2400 mL sample) and sorted through a 500-micron sieve. Samples were fixed in 10 percent formalin for 3 to 5 days before being transferred to 70 percent ethanol until processing. Individuals were identified to the lowest possible taxonomic resolution, but are grouped according to insect Orders in...
Categories: Data;
Types: Citation;
Tags: Clallam County,
Elwha River,
Olympic Peninsula,
State of Washington,
Strait of Juan de Fuca,
This portion of the data release presents a topographic point cloud of the intertidal zone at West Whidbey Island, WA. The point cloud was derived from structure-from-motion (SfM) processing of aerial imagery collected with an unmanned aerial system (UAS) on 2019-06-04. The point cloud has 293,261,002 points with an average point density of 1,063 points per-square meter. The point cloud is tiled to reduce individual file sizes and is grouped within a zip file for downloading. Each point in the point cloud contains an explicit horizontal and vertical coordinate, color, intensity, and classification. Water portions of the point cloud were classified using a polygon digitized from the orthomosaic imagery derived from...
High-resolution multichannel minisparker seismic-reflection data were collected by the U.S. Geological Survey and the University of Washington in February of 2017 west of Seattle in Puget Sound and in Lake Washington, Washington. Data were collected aboard University of Washington’s R/V Clifford A. Barnes during USGS field activity 2017-612-FA using a 500 Joule SIG 2-mille minisparker sound source and recorded on a 48 channel Geometrics digital hydrophone streamer. Sub-bottom acoustic penetration spans several hundreds of meters and is variable by location.
First Release: Aug 2017 Revised: May 2018 (ver. 1.1) Time-series data of velocity, pressure, turbidity, conductivity, and temperature were collected near the mouth of the Elwha River, Washington, USA, from December 2010 through October 2014, for the Department of Interior’s Elwha River Restoration project. As part of this project, the U.S. Geological Survey studied the effects of renewed sediment supplies on the coastal ecosystems before, during, and following the removal of two dams, Elwha and Glines Canyon, from the Elwha River. Removal of the dams reintroduced sediment stored in the reservoirs to the river, and the river moved much of this sediment to the coast. Several benthic tripods were instrumented with...
Categories: Data,
Data Release - Revised;
Types: Citation;
Tags: CMGP,
CONDUCTIVITY,
CTD,
CTD measurement,
CURRENT METERS,
This portion of the data release presents a topographic point cloud of the intertidal zone at Lone Tree Point, Kiket Bay, WA. The point cloud was derived from structure-from-motion (SfM) processing of aerial imagery collected with an unmanned aerial system (UAS) on 2019-06-05. The point cloud has 206,323,353 points with an average point density of 929 points per-square meter. The point cloud is tiled to reduce individual file sizes and is grouped within a zip file for downloading. Each point in the point cloud contains an explicit horizontal and vertical coordinate, color, intensity, and classification. Water portions of the point cloud were classified using a polygon digitized from the orthomosaic imagery derived...
Bedload sediment transport was calculated on the Elwha River, Washington to measure the amount of sediment transported along the riverbed during the 2016 water year. Bedload was measured using the Elwha bedload impact plate system (Hilldale and others, 2015). Physical bedload sampling by the U.S. Bureau of Reclamation for system calibration took place during November, 2012; March, May, and June 2013; and April 2014 at the Diversion Weir gauge (Magirl and others, 2015). Early in water year 2016 (year 5) the river formed an avulsion channel across the floodplain on river left, preventing a complete measurement of bedload passing the Diversion Weir gauge. As a result, bedload for water year 2016 (year 5 of the larger...
Categories: Data;
Tags: CMGP,
Coastal and Marine Geology Program,
Elwha Dam (historical),
Elwha River,
Glines Canyon Dam (historical),
This portion of the data release presents a high-resolution orthomosaic image of the intertidal zone at West Whidbey Island, WA. The orthomosaic has a resolution of 2 centimeters per pixel and was derived from structure-from-motion (SfM) processing of aerial imagery collected with an unmanned aerial system (UAS) on 2019-06-04. The raw imagery used to create the orthomosaic was acquired using a UAS fitted with a Ricoh GR II digital camera featuring a global shutter. The UAS was flown on pre-programmed autonomous flight lines spaced to provide approximately 70 percent overlap between images from adjacent lines. The camera was triggered at 1 Hz using a built-in intervalometer. The UAS was flown at an approximate altitude...
Introduction High-resolution swath bathymetry and backscatter were collected in the mouth of the Columbia River (MCR) as part of the Office of Naval Research (ONR) funded River and Inlet Dynamics Experiment in 2013. The goal of the U.S. Geological Survey’s component of the research was to evaluate the various hydrodynamic and sediment transport processes in the Columbia River estuary entrance using a combination of field observations coupled with Delft3D model simulations. The MCR is a dynamic estuary inlet with large waves, large tidal currents, and a significant river discharge, resulting in strong estuarine circulation. The field component of the study consisted of an intensive in-situ experiment including bottom-mounted...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Backscatter,
Bathymetry,
CMG,
CMGP,
Coastal and Marine Geology Program,
This part of the USGS data release presents bathymetry data for the Columbia River Mouth, Oregon and Washington. The bathymetry data of the Columbia River Mouth, Oregon and Washington were collected by the U.S. Geological Survey (USGS). Mapping was completed in 2013, using a 234-kHz SEA SWATHPlus interferometric system. These data are not intended for navigational purposes.
High-resolution chirp sub-bottom data were collected by the U.S. Geological Survey in April 2011 south of Bainbridge Island and west of Seattle in Puget Sound, Washington. Data were collected aboard the R/V Karluk during field activity K0211PS using an Edgetech SB-512i sub-bottom profiler. Sub-bottom acoustic penetration spans several tens of meters and is variable by location.
This portion of the data release presents digital surface models (DSM) and hillshade images of the intertidal zones at Puget Creek and Dickman Mill Park, Tacoma, WA. The DSMs have a resolution of 2.5 centimeters per pixel and were derived from structure-from-motion (SfM) processing of aerial imagery collected with an unmanned aerial system (UAS) on 2019-06-03. Unlike a digital elevation model (DEM), the DSM represents the elevation of the highest object within the bounds of a cell. Vegetation, buildings and other objects have not been removed from the data. In addition, data artifacts resulting from noise in the original imagery have not been removed. The raw imagery used to create this DSM was acquired using a...
RBRduo pressure and temperature sensors (early 2015 generation), mounted on aluminum frames, were moored in shallow (< 6 m) water depths in Bellingham Bay, Washington, to capture wave heights and periods. Continuous pressure fluctuations are transformed into surface-wave observations of wave heights, periods, and frequency spectra at 30-minute intervals.
Categories: Data;
Tags: Bellingham Bay,
CMHRP,
Coastal and Marine Hazards and Resources Program,
Distributions,
Oceans,
RBRduo pressure and temperature sensors (early 2015 generation), mounted on aluminum frames, were moored in shallow (< 6 m) water depths in Skagit Bay to capture wave heights and periods. Continuous pressure fluctuations are transformed into surface-wave observations of wave heights, periods, and frequency spectra at 30-minute intervals.
Categories: Data;
Tags: CMHRP,
Coastal and Marine Hazards and Resources Program,
Distributions,
Oceans,
PCMSC,
This portion of the data release presents the raw aerial imagery collected during an Unmanned Aerial System (UAS) survey of the intertidal zone at Puget Creek and Dickman Mill Park, Tacoma, WA, on 2019-06-03. The imagery was acquired using a Department of Interior-owned 3DR Solo quadcopter fitted with a Ricoh GR II digital camera featuring a global shutter. The camera was mounted using a fixed mount on the bottom of the UAS and oriented in an approximately nadir orientation. The UAS was flown on pre-programmed autonomous flight lines at an approximate altitude of 50 meters above ground level (AGL), resulting in a nominal ground-sample-distance (GSD) of 1.3 centimeters per pixel. The flight lines were oriented roughly...
Simulations of the period 2016-2099 were conducted using the Salish Sea hydrodynamic model to evaluate extreme water levels associated with anticipated changes in sea level and climate forcing. The model projections accounting for sea level position, tides, remote sea-level anomalies, local winds and storm surge and stream flows as they affect water density. Dynamically downscaled Weather Research and Forecasting (WRF) CMIP5 GFDL wind and atmospheric pressure fields were prescribed over the model open boundary and used to compute sea-level anomaly prescribed at the model ocean boundary. Simulations were made for eight different Sea-Level Rise (SLR) conditions, 0, 0.25, 0.5, 1, 1.5, 2, 3, and 5 meters relative to...
Categories: Data;
Tags: CMHRP,
Climate Change,
Coastal and Marine Hazards and Resources Program,
Distributions,
Extreme Weather,
This portion of the data release presents topographic point clouds of the ocean beach at Fort Stevens State Park, OR, and Benson Beach at Cape Disappointment State Park, WA. The point clouds were derived from structure-from-motion (SfM) processing of aerial imagery collected with unoccupied aerial systems (UAS) on during low tide surveys on 7 and 8 August 2017. The point clouds from each survey are tiled into 1000 by 1000 meter tiles to reduce individual file sizes. The Fort Stevens point clouds have a total of 271,915,544 points, with an average point density of 407 points per-square meter and an average point spacing of 5 centimeters. The Benson Beach point clouds have a total of 301,569,130 points, with an average...
Categories: Data;
Tags: Bathymetry and Elevation,
Benson Beach,
CHMRP,
Cape Disappointment,
Clatsop County,
This portion of the data release presents the locations of the temporary ground control points (GCPs) used for the structure-from-motion (SfM) processing of the imagery collected during an unmanned aerial system (UAS) survey of the intertidal zone at Post Point, Bellingham Bay, WA on 2019-06-06. Nineteen temporary ground control points (GCPs) were distributed throughout each survey area to establish survey control. The GCPs consisted of a combination of small square tarps with black-and-white cross patterns and "X" marks placed on the ground using temporary chalk. The GCP positions were measured using post-processed kinematic (PPK) GPS, using corrections from a GPS base station located approximately 5 kilometers...
Categories: Data;
Tags: Bathymetry and Elevation,
Bellingham,
Bellingham Bay,
CHMRP,
Coastal and Marine Hazards and Resources Program,
This dataset includes biological variables showing surf smelt spawning presence, geological variables describing beach composition, and sample locations using RTK-GPS. This field data was also used to run the Sea Level Affecting Marshes Model (SLAMM; Warren Pinnacle Consulting, Inc., Warren, Vt)) to predict the changes to beaches over time, and under different sea level rise scenarios. Field sampling took place on the northern part of Bainbridge Island, Puget Sound, Washington during summer and fall of 2010.
Geo-referenced digital imagery of in-situ seafloor sediments in the mouth of the Columbia River was collected and analyzed to determine median grain size of the surface sediments. Digital imagery of the seafloor was collected with a “flying eyeball” (Rubin and others, 2007) from the R/V Parke Snavely from September 11 to September 13, 2014 (USGS Field Activity 2014-642-FA). The flying eyeball consists of a standard definition plumbing inspection video camera and LED light ring inserted in a 50 kg wrecking ball. The video camera has a resolution of 480 by 720 pixels with a resolution of 0.009 mm/pixel when the target is flush against the exterior surface of the lens. Sample locations were chosen to allow for the...
Categories: Data;
Types: Citation,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Columbia River,
Marine Geology,
State of Oregon,
State of Washington,
Substrate,
|
|
