Filters: Tags: Tanana Quadrangle (X)
22 results (113ms)|
Filters
|
As part of the Department of Natural Resources (DNR) effort to make final recommendations of federal land parcels to be considered for selection by the State of Alaska according to provisions of the Statehood Act, a decision was made to identify and evaluate potential access corridors. Corridor maps were compiled for a total of 78 quadrangles throughout Alaska. This map suite shows relevant geologic information at a scale of 1:250,000 for 10-mile-wide corridors straddling centerlines for proposed access routes throughout Alaska. The maps are based on geologic data compiled from existing, published mapping. Each compiled corridor geology map was used to derive maps of potential construction materials, data quality,...
In advance of design, permitting, and construction of a pipeline to deliver North Slope natural gas to out-of-state customers and Alaska communities, the Division of Geological & Geophysical Surveys (DGGS) has acquired lidar (Light Detection and Ranging) data along proposed pipeline routes, nearby areas of infrastructure, and regions where significant geologic hazards have been identified. Lidar data will serve multiple purposes, but have primarily been collected to (1) evaluate active faulting, slope instability, thaw settlement, erosion, and other engineering constraints along proposed pipeline routes, and (2) provide a base layer for the state-federal GIS database that will be used to evaluate permit applications...
In advance of design, permitting, and construction of a pipeline to deliver North Slope natural gas to out-of-state customers and Alaska communities, the Division of Geological & Geophysical Surveys (DGGS) has acquired lidar (light detection and ranging) data along proposed pipeline routes, nearby areas of infrastructure, and regions where significant geologic hazards have been identified. Lidar data will serve multiple purposes, but have primarily been collected to (1) evaluate active faulting, slope instability, thaw settlement, erosion, and other engineering constraints along proposed pipeline routes, and (2) provide a base layer for the state-federal GIS database that will be used to evaluate permit applications...
Re-analyses of sample pulps and bulk rejects from historic USBM rock and heavy-mineral-concentrate samples were conducted by the Alaska Division of Geological & Geophysical Surveys (DGGS) as part of the State of Alaska's Strategic and Critical Minerals Assessment project, which is designed to evaluate Alaska's potential for these resources. The objective of this resource assessment is to expand the state's geochemical database by obtaining and publishing modern, quantitative geochemical analyses for historic USBM samples, where available. Highlights of this re-analysis project include heavy mineral concentrates with up 7,220 ppm Sn, 5,870 ppm Cr, and 17,000 ppm Mn.
In advance of design, permitting, and construction of a pipeline to deliver North Slope natural gas to out-of-state customers and Alaska communities, the Division of Geological & Geophysical Surveys (DGGS) has acquired lidar (light detection and ranging) data along proposed pipeline routes, nearby areas of infrastructure, and regions where significant geologic hazards have been identified. Lidar data will serve multiple purposes, but have primarily been collected to (1) evaluate active faulting, slope instability, thaw settlement, erosion, and other engineering constraints along proposed pipeline routes, and (2) provide a base layer for the state-federal GIS database that will be used to evaluate permit applications...
In advance of design, permitting, and construction of a pipeline to deliver North Slope natural gas to out-of-state customers and Alaska communities, the Division of Geological & Geophysical Surveys (DGGS) has acquired lidar (Light Detection and Ranging) data along proposed pipeline routes, nearby areas of infrastructure, and regions where significant geologic hazards have been identified. Lidar data will serve multiple purposes, but have primarily been collected to (1) evaluate active faulting, slope instability, thaw settlement, erosion, and other engineering constraints along proposed pipeline routes, and (2) provide a base layer for the state-federal GIS database that will be used to evaluate permit applications...
Mineral-resources personnel from the Alaska Division of Geological & Geophysical Surveys carried out a geologic field survey, including mapping and sampling in the Moran area in the Tanana A-6 and B-6 quadrangles, and the Melozitna A-1, A2, B-1, and B-2 quadrangles, Alaska from June 17 to August 15, 2011. The fieldwork provides basic information critical to building an understanding of Alaska geology and is part of an integrated program of airborne geophysical surveys followed by geologic mapping. During 2011, 212 rock samples were collected for geochemical trace-element analysis, 58 rock samples were collected for whole-rock (major- and minor-oxide and petrogenetically important trace elements tables) analyses,...
In advance of design, permitting, and construction of a pipeline to deliver North Slope natural gas to out-of-state customers and Alaska communities, the Division of Geological & Geophysical Surveys (DGGS) has acquired lidar (light detection and ranging) data along proposed pipeline routes, nearby areas of infrastructure, and regions where significant geologic hazards have been identified. Lidar data will serve multiple purposes, but have primarily been collected to (1) evaluate active faulting, slope instability, thaw settlement, erosion, and other engineering constraints along proposed pipeline routes, and (2) provide a base layer for the state-federal GIS database that will be used to evaluate permit applications...
In advance of design, permitting, and construction of a pipeline to deliver North Slope natural gas to out-of-state customers and Alaska communities, the Division of Geological & Geophysical Surveys (DGGS) has acquired lidar (Light Detection and Ranging) data along proposed pipeline routes, nearby areas of infrastructure, and regions where significant geologic hazards have been identified. Lidar data will serve multiple purposes, but have primarily been collected to (1) evaluate active faulting, slope instability, thaw settlement, erosion, and other engineering constraints along proposed pipeline routes, and (2) provide a base layer for the state-federal GIS database that will be used to evaluate permit applications...
Mineral-resources personnel from the Alaska Division of Geological & Geophysical Surveys conducted reconnaissance stream-sediment and pan-concentrate sampling in the Melozitna Mining District, Tanana and Melozitna quadrangles, from July 25 to August 13, 2011. This helicopter-supported sampling project was part of a statewide assessment of Alaska's potential for rare-earth element (REE) mineralization, and was funded by the Rare Earth Elements and Strategic Minerals Assessment capital improvement project. During this field project, 32 stream sediment and 28 heavy-mineral pan concentrate samples were collected for geochemical analysis (geochemical trace elements and rare earth elements). An additional historic U.S....
In advance of design, permitting, and construction of a pipeline to deliver North Slope natural gas to out-of-state customers and Alaska communities, the Division of Geological & Geophysical Surveys (DGGS) has acquired lidar (Light Detection and Ranging) data along proposed pipeline routes, nearby areas of infrastructure, and regions where significant geologic hazards have been identified. Lidar data will serve multiple purposes, but have primarily been collected to (1) evaluate active faulting, slope instability, thaw settlement, erosion, and other engineering constraints along proposed pipeline routes, and (2) provide a base layer for the state-federal GIS database that will be used to evaluate permit applications...
In advance of design, permitting, and construction of a pipeline to deliver North Slope natural gas to out-of-state customers and Alaska communities, the Division of Geological & Geophysical Surveys (DGGS) has acquired lidar (light detection and ranging) data along proposed pipeline routes, nearby areas of infrastructure, and regions where significant geologic hazards have been identified. Lidar data will serve multiple purposes, but have primarily been collected to (1) evaluate active faulting, slope instability, thaw settlement, erosion, and other engineering constraints along proposed pipeline routes, and (2) provide a base layer for the state-federal GIS database that will be used to evaluate permit applications...
In advance of design, permitting, and construction of a pipeline to deliver North Slope natural gas to out-of-state customers and Alaska communities, the Division of Geological & Geophysical Surveys (DGGS) has acquired lidar (Light Detection and Ranging) data along proposed pipeline routes, nearby areas of infrastructure, and regions where significant geologic hazards have been identified. Lidar data will serve multiple purposes, but have primarily been collected to (1) evaluate active faulting, slope instability, thaw settlement, erosion, and other engineering constraints along proposed pipeline routes, and (2) provide a base layer for the state-federal GIS database that will be used to evaluate permit applications...
Mineral-resources personnel from the Alaska Division of Geological & Geophysical Surveys carried out a geologic field survey, including mapping and sampling in the Moran area in the Tanana A-6 and B-6 quadrangles, and the Melozitna A-1, A-2, B-1, and B-2 quadrangles, Alaska, from June 17 to August 15, 2011. The fieldwork provides basic information critical to building an understanding of Alaska’s geology and is part of an integrated program of airborne geophysical surveys followed by geologic mapping. During 2011, 212 rock samples were collected for geochemical trace-element analysis (tables 1–3), 58 rock samples were collected for whole-rock (major- and minor-oxide and petrogenetically important trace elements)...
In advance of design, permitting, and construction of a pipeline to deliver North Slope natural gas to out-of-state customers and Alaska communities, the Division of Geological & Geophysical Surveys (DGGS) has acquired lidar (light detection and ranging) data along proposed pipeline routes, nearby areas of infrastructure, and regions where significant geologic hazards have been identified. Lidar data will serve multiple purposes, but have primarily been collected to (1) evaluate active faulting, slope instability, thaw settlement, erosion, and other engineering constraints along proposed pipeline routes, and (2) provide a base layer for the state-federal GIS database that will be used to evaluate permit applications...
Mineral-resources personnel from the Alaska Division of Geological & Geophysical Surveys (DGGS) carried out a helicopter-supported geological and geochemical resource assessment project in the Beaver, Bettles, Livengood, and Tanana quadrangles from June 23 through August 5, 2012. The objectives of DGGS's resource assessment are to improve the trace-element geochemical coverage of selected watersheds; to obtain modern, quantitative geochemical analyses; to understand the petrogenesis of the granites; and to better document established mineral occurrences. Stream-sediment, pan-concentrate, and rock sampling were conducted as part of the State's Rare Earth Elements and Strategic Minerals Assessment project, which is...
A pilot study using discriminant analysis on major oxide and minor element data from 67 chert samples in the Rampart area, southeastern Tanana and southwest Livengood Quadrangles, western Yukon-Tanana Upland, Alaska, generally indicates a unique geochemical signature for the cherts of a given unit.Chert samples from five known type locales were used as standards of comparison: 1)Livengood Dome Chert (Ordovician), 2)Amy Creek unit (Proterozoic to early Paleozoic), 3)Rampart Group (Mississippian to Triassic), 4)Troublesome Creek unit (Devonian), and 5)Permian-Triassic clastic unit (associated with the Triassic-dated gabbro). Samples from the above units were compared to chert from Tanana B-1 area-units of unknown...
This digital publication, GPR 2010-1, contains data produced from airborne geophysical surveys conducted in 2009 for the Moran survey area in the south-central Melozitna mining district, Melozitna and Tanana quadrangles, central Alaska. Aeromagnetic, electromagnetic (EM), and radiometric data were acquired by helicopter for about 653 sq miles. Fugro Airborne Survey's frequency-domain DIGHEM V system was used for the EM data. GPR 2010-1 includes (1) raw and processed linedata; (2) gridded, Google Earth, and Geotiff formats of the calculated linedata; (3) maps of the data; and (4) vector files of data contours and flight lines.
In advance of design, permitting, and construction of a pipeline to deliver North Slope natural gas to out-of-state customers and Alaska communities, the Division of Geological & Geophysical Surveys (DGGS) has acquired LiDAR (Light Detection and Ranging) data along proposed pipeline routes, nearby areas of infrastructure, and regions where significant geologic hazards have been identified. LiDAR data will serve multiple purposes, but have primarily been collected to (1) evaluate active faulting, slope instability, thaw settlement, erosion, and other engineering constraints along proposed pipeline routes, and (2) provide a base layer for the state-federal GIS database that will be used to evaluate permit applications...
This publication is a 6 CD-ROM compilation of data describing the bedrock, surficial, and engineering geology of a portion of the proposed Alaska Natural Gas Transportation System corridor. Maps or reports with scales of 1:250,000 or greater that cross or come within 5 miles of the centerline were included in this compilation. Two maps with scales smaller than 1:250,000 were also included: OFR 82-1071 and OFR 98-133. A complete bibliography of references used in this compilation is on the first CD-ROM of this project in ANGTSgis/RefsCited.doc. This project consists of an ArcView 3.x (AV) .apr file and a Microsoft Access 2000 (MS Access) database. The ArcView project and the Access database are linked using AccessLink,...
|
|
