Filters: Tags: Topobathymetric (X) > partyWithName: U.S. Geological Survey (X)
10 results (11ms)|
Filters
Date Range
Contacts
Categories Tag Types Tag Schemes
|
Located in the northern tropical Pacific Ocean, Majuro is the capital of the Republic of the Marshall Islands. Majuro Atoll consists of a large, narrow landmass and a set of smaller perimeter islands surrounding a lagoon that is over 100 square miles in size. The waters surrounding the Majuro Atoll land areas are relatively shallow with poorly mapped bathymetry. However, the Pacific Ocean on the exterior of the coral atoll and the lagoon within its interior consist of deep bathymetry with steep slopes. The highest elevation of the Majuro Atoll is estimated at only 3-meters above sea level, which is the island community of Laura located on the western part of the atoll. At the eastern edge of the atoll lies the capital...
Categories: Data;
Tags: 3D Elevation Program,
3DEP,
American Society of Photogrammetry and Remote Sensing,
Base Maps,
Bathymetric,
To support the modeling of storm-induced flooding, the USGS Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for Puget Sound. Puget Sound is located along the northwestern coast of Washington and is part of the Salish Sea. Puget Sound is the third largest estuary in the United States. High-resolution coastal elevation data is required to identify flood, storm, and sea-level rise inundation hazard zones and other earth science applications, such as the development of sediment transport and storm surge models. The new TBDEM consists of the best available multi-source topographic and bathymetric elevation data for Puget...
To support the modeling of storm-induced flooding, the USGS Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for the Central California Coast. High-resolution coastal elevation data is required to identify flood, hurricane, and sea-level rise inundation hazard zones and other earth science applications, such as the development of sediment transport and storm surge models. The new TBDEM consists of the best available multi-source topographic and bathymetric elevation data for the onshore and offshore areas in Central California. The Central California TBDEM integrates 70 different topographic and bathymetric data sources...
To support the modeling of storm-induced flooding, the USGS Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for the Northern California Coast. High-resolution coastal elevation data is required to identify flood, hurricane, and sea-level rise inundation hazard zones and other earth science applications, such as the development of sediment transport and storm surge models. This TBDEM consists of the best available multi-source topographic and bathymetric elevation data for the onshore and offshore areas in Northern California. The Northern California TBDEM integrates 26 different topographic and bathymetric data sources...
In recent years, rising sea levels have threatened critical infrastructure and cultural assets at Puʻuhonua o Hōnaunau National Historical Park thus motivating the park to make adaptive decisions in managing these key resources. To support the development of decision support tools for sea level rise preparedness, the U.S. Geological Survey (USGS) Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for Puʻuhonua o Hōnaunau National Historical Park. This dataset was developed in collaboration with the University of Hawaii- Mānoa Sea Level Center, Department of Interior Pacific Island Climate Adaptation Science Center, and...
To support Hurricane Florence impact modeling of storm-induced flooding and sediment transport, the U.S. Geological Survey (USGS) Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for coastal Georgia. High-resolution coastal topobathymetric data are required to characterize flooding, storms, and sea-level rise inundation hazard zones and other earth science applications, such as the development of sediment transport and storm surge models. This TBDEM consists of the best available multi-source topographic and bathymetric elevation data for Coastal Georgia including neighboring bays, estuaries, waterways, inlets, and...
The U.S. Geological Survey (USGS) 3D Elevation Program (3DEP) has started to initiate the development of pilot 3D National Topography Models to generate 3-dimensional surface elevation models that integrate river topographic bare-earth elevation surfaces with channel bed bathymetry. Detailed knowledge of integrated river system topography, bathymetry, and topobathymetry, is essential for habitat restoration, hydrologic modeling, and other key science applications such as flood mapping and identification of fluvial geomorphic features. An integrated 1-meter topobathymetric digital elevation model (TBDEM) for the Kootenai River near Bonners Ferry, Idaho, has been developed for this first pilot study. The Kootenai...
This data release includes a file geodatabase with high-resolution geospatial products that illustrate the geomorphology and various land-surface parameters along a 313-kilometer segment of the mainstem Klamath River corridor downstream of Iron Gate Dam, CA. The geospatial products were derived from topobathymetric elevation data collected to document baseline topography and bathymetry before the removal of four hydro-electric dams. The elevation survey included aerial lidar, using an integrated topobathymetric sensor (with near-infrared and green wavelengths), and boat-based sonar measurements of water depths. Acquisition dates for the aerial topobathymetric lidar spanned 06/01/2018 to 06/14/2018. For the bathymetric...
To support Hurricane Florence impact modeling of storm-induced flooding and sediment transport, the U.S. Geological Survey (USGS) Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for coastal North Carolina, and South Carolina. High-resolution coastal topobathymetric data are required to characterize flooding, storms, and sea-level rise inundation hazard zones and other earth science applications, such as the development of sediment transport and storm surge models. This TBDEM consists of the best available multi-source topographic and bathymetric elevation data for the Coastal Carolinas including neighboring bays, estuaries,...
This dataset provides a modified version of the previously published Lake Powell topobathymetric digital elevation model (TBDEM; Poppenga and others, 2020). The original TBDEM is comprised of four source datasets: (1) a 2017 1-meter multibeam bathymetric survey; (2) a 2018 topographic light detection and ranging (lidar) derived digital elevation model (DEM); (3) a historical topographic DEM that was interpolated from contours maps created in 1947 and 1959; and (4) interpolated topography where gaps existed in the bathymetric and lidar data or where historical data were not suitable (Poppenga and others, 2020). For this data release, two corrections were made to the TBDEM to address errors associated with the historic...
|
|
