Filters: Tags: U.S. Geological Survey (USGS) (X)
198 results (73ms)|
Filters
Date Range
Extensions Types Contacts
Categories Tag Types
|
LANDFIRE's (LF) 2022 Canopy Base Height (CBH) supplies information used in fire behavior models to determine the critical point at which a surface fire will transition to a crown fire in conjunction with other environmental factors, such as wind speed and moisture content. CBH data are continuous from 0 to 9.9 meters (to the nearest 0.1m) and describe the lowest point in a stand where there is enough available fuel (0.25in diameter) to propagate fire vertically through the canopy. Critical CBH is defined as the lowest point at which the Canopy Bulk Density (CBD) is .012kg m-3. Under different scenarios of disturbance and based on previous research incorporating plot-level CBH calculations, CBH for disturbed areas...
LANDFIRE's (LF) 2022 update (LF 2022) Existing Vegetation Type (EVT) represents the current distribution of the terrestrial ecological systems classification developed by NatureServe for the western hemisphere. In this context, a terrestrial ecological system is defined as a group of plant community types that tend to co-occur within landscapes with similar ecological processes, substrates, and/or environmental gradients. EVT also includes ruderal or semi-natural vegetation types within the U.S. National Vegetation Classification [(NVC) https://usnvc.org/]. See the EVT product page (https://www.landfire.gov/evt.php) for more information about ecological systems and NVC classifications. EVT is mapped using decision...
LANDFIRE's (LF) 2022 update (LF 2022) Existing Vegetation Height (EVH) represents the average height of the dominant vegetation for a 30-m cell. EVH is produced separately for tree, shrub, and herbaceous lifeforms using training data depicting the average height weighted by species cover and Existing Vegetation Type (EVT) lifeform. Decision tree models using field reference data, lidar, and Landsat are developed separately for each lifeform, then lifeform specific height class layers are merged along with land cover into a single EVH product. EVH ranges are continuous for herbaceous lifeform ranging from 0.1 to 1 meter with decimeter increments, 0.1 to 3 meters for shrub lifeform, and 1 to 99 meters for tree lifeform....
Files contain hydrodynamic and sediment transport data for the location and deployment indicated. Time-series data of water depth, velocity, turbidity, and temperature were collected in San Pablo Bay and China Camp Marsh as part of the San Francisco Bay Marsh Sediment Experiments. Several instruments were deployed in tidal creek, marsh, mudflat, and Bay locations, gathering data on water depth, velocity, salinity/temperature, and turbidity. Deployment data are grouped by region (Bay channel (main Bay), Bay shallows, tidal creek, or marsh/mudflat/upper tidal creek). Users are advised to check metadata and instrument information carefully for applicable time periods of specific data, as individual instrument deployment...
This data release contains gridded bathymetry data from repeated multibeam sonar surveys and input files for a hydrodynamic and sediment transport model application of the mouth of the Columbia River (MCR), Oregon and Washington. The bathymetry data were collected by the U.S. Army Corps of Engineers Portland District Surveys Section between September 9, 2020, and March 10, 2021, to characterize the morphology and dispersal of a nearshore berm composed of 216,000 m3 of sand-sized sediment that was dredged from the MCR navigation channel and placed on the northern flank of the ebb-tidal delta in water depths between 12 and 15 m. Observations of berm morphology were compared with predictions from a three-dimensional...
Categories: Data;
Tags: CMHRP,
Coastal and Marine Hazards and Resources Program,
Geomorphology,
PCMSC,
Pacific Coastal and Marine Science Center,
Surveys of the bathymetry and backscatter intensity of the sea floor of the Historic Area Remediation Site (HARS), offshore of New York and New Jersey, were carried out in 1996, 1998, and 2000 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The objective of the multiple echosounder surveys was to map the bathymetry and surficial sediments over time as dredged material was placed in the HARS to remediate contaminated sediments. Maps derived from the multibeam surveys show sea-floor bathymetry, shaded-relief bathymetry, and backscatter intensity (a measure of sea-floor texture and roughness) at a spatial resolution of 3 meters. The area was mapped by the U.S....
Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University...
The Hudson Canyon begins on the outer continental shelf off the east coast of the United States at about 100-meters (m) water depth and extends offshore southeastward across the continental slope and rise. A multibeam survey was carried out in 2002 to map the bathymetry and backscatter intensity of the sea floor of the Hudson Canyon and adjacent slope and rise. The survey covered an area approximately 205 kilometers (km) in the offshore direction, extending from about 500 m to about 4,000 m water depth, and about 110 km in the alongshore direction, centered on the Hudson Canyon. The sea floor was mapped using a SeaBeam Instruments 2112 multibeam echosounder aboard the National Oceanic and Atmospheric Administration...
As one of the cornerstones of the U.S. Geological Survey's (USGS) National Geospatial Program, The National Map is a collaborative effort among the USGS and other Federal, State, and local partners to improve and deliver topographic information for the Nation. It has many uses ranging from recreation to scientific analysis to emergency response. The National Map is easily accessible for display on the Web, as products and services, and as downloadable data. The geographic information available from The National Map includes orthoimagery (aerial photographs), elevation, geographic names, hydrography, boundaries, transportation, structures, and land cover.
LANDFIRE's (LF) 2022 update (LF 2022) Existing Vegetation Type (EVT) represents the current distribution of the terrestrial ecological systems classification developed by NatureServe for the western hemisphere. In this context, a terrestrial ecological system is defined as a group of plant community types that tend to co-occur within landscapes with similar ecological processes, substrates, and/or environmental gradients. EVT also includes ruderal or semi-natural vegetation types within the U.S. National Vegetation Classification [(NVC) https://usnvc.org/]. See the EVT product page (https://www.landfire.gov/evt.php) for more information about ecological systems and NVC classifications. EVT is mapped using decision...
LANDFIRE's (LF) 2022 Canopy Bulk Density (CBD) describes the mass of available canopy fuel per unit canopy volume that would burn in a crown fire. A spatially explicit map of CBD supplies information used in fire behavior models to determine the spread characteristics of active crown fires across the landscape. CBD for disturbed and non-disturbed areas is determined via a general linear model (GLM) relating Canopy Height (CH) and Canopy Cover (CC) to CBD (Reeves et al 2009). In LF 2022, fuel products are created with LF 2016 Remap vegetation in areas that were un-disturbed in the last ten years. To designate disturbed areas where CBD is modified, the aggregated Annual Disturbance products from 2013 to 2022 in the...
LANDFIRE’s (LF) 2022 Vegetation Condition Class (VCC) is a reclassification and categorization of the LF 2022 Vegetation Departure (VDep) product. VCC indicates the general level to which current vegetation is different from the simulated historical reference condition. Therefore, VCC is a derivative of VDep; the VDep product indicates how different current vegetation is compared to the estimated historical reference condition, and is based on change to species composition, structure, and canopy closure. To learn more about VCC and VDep go to https://www.landfire.gov/fireregime.php. Condition classes for VCC are defined in two ways; the original 3 category system from Fire Regime Condition Class Guidebook (FRCC...
LANDFIRE's (LF) 2022 Canopy Bulk Density (CBD) describes the mass of available canopy fuel per unit canopy volume that would burn in a crown fire. A spatially explicit map of CBD supplies information used in fire behavior models to determine the spread characteristics of active crown fires across the landscape. CBD for disturbed and non-disturbed areas is determined via a general linear model (GLM) relating Canopy Height (CH) and Canopy Cover (CC) to CBD (Reeves et al 2009). In LF 2022, fuel products are created with LF 2016 Remap vegetation in areas that were un-disturbed in the last ten years. To designate disturbed areas where CBD is modified, the aggregated Annual Disturbance products from 2013 to 2022 in the...
LANDFIRE's (LF) 2022 update (LF 2022) Existing Vegetation Cover (EVC) represents the vertically projected percent cover of the live canopy for a 30-m cell. EVC is produced separately for tree, shrub, and herbaceous lifeforms. Training data depicting percentages of canopy cover are obtained from plot-level ground-based visual assessments and lidar observations. These are combined with Landsat imagery (from multiple seasons), to inform models built independently for each lifeform. Tree, shrub, and herbaceous lifeforms each have a potential range from 10% to 100% (cover values less than 10% are binned into the 10% value). The three independent lifeform datasets are merged into a single product based on the dominant...
LANDFIRE (LF) disturbance products are developed to provide temporal and spatial information related to landscape change. Historical Disturbance (HDist) is developed from the base annual LF disturbance products, and attribute code system, to represent the history of disturbance for a 10-year span. Each year's disturbance scenarios are checked against time relevant LF vegetation products to check for logical inconsistencies. Errant codes are flagged and updated to a discard code with the remaining disturbance types cross-walked/aggregated to Fuel Disturbance (FDist) types. HDist includes the year of disturbance that is recorded for that pixel. In LF 2022, the time since disturbance code is the same for both HDist...
The National Land Cover Database products are created through a cooperative project conducted by the Multi-Resolution Land Characteristics (MRLC) Consortium. The MRLC Consortium is a partnership of Federal agencies (www.mrlc.gov), consisting of the U.S. Geological Survey (USGS), the National Oceanic and Atmospheric Administration (NOAA), the U.S. Environmental Protection Agency (EPA), the U.S. Department of Agriculture - Forest Service (USDA-FS), the National Park Service (NPS), the U.S. Fish and Wildlife Service (USFWS), the Bureau of Land Management (BLM) and the USDA Natural Resources Conservation Service (NRCS). The success of NLCD over nearly two decades is credited to the continuing collaborative spirit of...
The data release for the geologic map of the Butte 1 degree x 2 degrees quadrangle, Montana, is a Geologic Map Schema (GeMS)-compliant version that updates the GIS files for the geologic map published in Montana Bureau of Mines and Geology Open File Report MBMG 363 (Lewis, 1998). The updated digital data present the attribute tables and geospatial features (points, lines and polygons) in the format that meets GeMS requirements. This data release presents the geologic map as shown on the plates and captured in geospatial data for the published map. Minor errors, such as mistakes in line decoration or differences between the digital data and the map image, are corrected in this version. The database represents the...
Categories: Data;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Downloadable,
Map Service;
Tags: "Stratigraphy",
"Structural Geology"],
Butte,
Deer Lodge County,
Geologic Map Schema (GeMS),
Surveys of the bathymetry and backscatter intensity of the sea floor of the Historic Area Remediation Site (HARS), offshore of New York and New Jersey, were carried out in 1996, 1998, and 2000 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The objective of the multiple echosounder surveys was to map the bathymetry and surficial sediments over time as dredged material was placed in the HARS to remediate contaminated sediments. Maps derived from the multibeam surveys show sea-floor bathymetry, shaded-relief bathymetry, and backscatter intensity (a measure of sea-floor texture and roughness) at a spatial resolution of 3 meters. The area was mapped by the U.S....
Surveys of the bathymetry and backscatter intensity of the sea floor of the Historic Area Remediation Site (HARS), offshore of New York and New Jersey, were carried out in 1996, 1998, and 2000 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The objective of the multiple echosounder surveys was to map the bathymetry and surficial sediments over time as dredged material was placed in the HARS to remediate contaminated sediments. Maps derived from the multibeam surveys show sea-floor bathymetry, shaded-relief bathymetry, and backscatter intensity (a measure of sea-floor texture and roughness) at a spatial resolution of 3 meters. The area was mapped by the U.S....
This dataset (located by latitude and longitude) is a subset of the geochemical dataset found in Chap. E, Appendix 2, Disc 1, and used in this study of the Lower Kittanning coal bed. That dataset is a compilation of data from the U.S. Geological Survey's (USGS) National Coal Resources Data System (NCRDS) USCHEM (U.S. geoCHEMical), The Pennsylvania State University (PSU), the West Virginia Economic and Geological Survey (WVGES), and the Ohio Division of Geological Survey (OHGS) coal quality databases as well as published U.S. Bureau of Mines (USBM) data. The metadata file for the complete dataset is found in Chap. E, Appendix 3, Disc 1 (please see it for more detailed information on this geochemical dataset). This...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Appalachians,
Armstrong County, PA,
Barbour County, WV,
Beaver County, PA,
Belmont County, OH,
|
|
