Filters: Tags: Velocity (X) > partyWithName: U.S. Geological Survey (X)
26 results (82ms)|
Filters
Date Range
Types Contacts
Categories Tag Types Tag Schemes |
ADCP data were collected on two separate occasions (May 14-15, 2013 and May 28, 2013) in the Marseilles Pool on the Illinois River using a Teledyne Rio Grande 1200 kHz Acoustic Doppler Current Profiler with integrated Trimble GPS. ADCP data was collected in reciprocal pairs along cross-sections and along roughly streamwise oriented lines between cross-sections. The data are provided in: (1) a zipped folder containing classic ascii output files exported from WinRiverII software, and a README text file indicating which files are reciprocal pairs, and which files are streamwise oriented lines (2) a zipped folder containing KML files for each transect.
Water velocities and water-quality constituents were measured along planned survey lines, which were generally perpendicular to the shoreline and spaced 100 meters apart, over an approximately 2.3-mile section of nearshore Lake Erie on June 10-12, 2019 (survey 1), and August 19-21, 2019 (survey 2), using a 1200 kHz acoustic Doppler current profiler (ADCP), a YSI 6920 V2 multiparameter sonde, and a YSI EcoMapper autonomous underwater vehicle (AUV). Water-quality data collected in this area included near-surface and three-dimensional measurements of water temperature, specific conductance, pH, dissolved oxygen, turbidity, chlorophyll, and phycocyanin (blue-green algae). The data were geo-referenced with an integrated...
Categories: Data;
Tags: Cleveland,
Easterly Wastewater Treatment Plant (WWTP),
EcoMapper,
Euclid Creek,
Lake Erie,
The dataset consists of a shapefile of measurements of surface velocity magnitude and direction at the Colorado River at Salt Wash near Moab, UT, on October 7, 2020. The dataset contains approximately 3 km of river length. The surface velocity measurements were made by applying Large-Scale Particle Image Velocimetry (LSPIV) techniques, using overlapping videos collected by small Unmanned Aircraft Systems (sUAS). Additional attributes were calculated from the surface velocity measurements and are included in the dataset.
Velocity and water-quality surveys were completed along an approximately 71-mile reach of the Ohio River between Markland Locks and Dam (river mile 531.5) and McAlpine Locks and Dam (river mile 606.8) on October 27–November 4, 2016 (survey #1), and June 26–29, 2017 (survey #2). Water-quality data collected in this reach included surface measurements and vertical profiles of water temperature, specific conductance, pH, dissolved oxygen, turbidity, chlorophyll, and phycocyanin. Streamflow and velocity data were collected simultaneous to the water-quality data at cross-sections and along longitudinal lines (corresponding to the water-quality surface measurements) and at selected stationary locations (corresponding...
Categories: Data;
Tags: Indiana,
Kentucky,
Louisville,
Markland Locks and Dam,
McAlpine Locks and Dam,
Velocity and water-quality surveys were completed along an approximately 71-mile reach of the Ohio River between Markland Locks and Dam (river mile 531.5) and McAlpine Locks and Dam (river mile 606.8) on October 27–November 4, 2016 (survey #1), and June 26–29, 2017 (survey #2). Water-quality data collected in this reach included surface measurements and vertical profiles of water temperature, specific conductance, pH, dissolved oxygen, turbidity, chlorophyll, and phycocyanin. Streamflow and velocity data were collected simultaneous to the water-quality data at cross-sections and along longitudinal lines (corresponding to the water-quality surface measurements) and at selected stationary locations (corresponding...
Categories: Data;
Tags: Indiana,
Kentucky,
Louisville,
Markland Locks and Dam,
McAlpine Locks and Dam,
These data are depth-averaged velocities measured by an acoustic Doppler current profiler (ADCP), as well as continuous depth-averaged velocities from a stationary location measured with an acoustic Doppler velocity meter (ADVM). These data were collected from the July 12-14, 2022, survey of the Ashtabula River near Ashtabula, Ohio. The location of the ADCP data are from approximately 1,500 feet upstream from the Bridge Street bridge to 3,000 feet upstream from the Bridge Street bridge. The ADVM data are from approximately 41° 53' 46.4"N, 80° 47' 39.5"W. ADCP data were collected using an integrated global navigation satellite system (GNSS) smart antenna with submeter accuracy. The ADCP and GNSS antenna were mounted...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: ADCP,
ADVM,
Ashtabula,
Bathymetry,
Ecology,
The dataset consists of a shapefile of measurements of surface velocity magnitude and direction at the Colorado River at Windy Gap near Granby, CO, on July 27, 2021. The dataset contains approximately 1 km of river length. The surface velocity measurements were made by applying Large-Scale Particle Image Velocimetry (LSPIV) techniques, using overlapping videos collected by small Unmanned Aircraft Systems (sUAS). Total time to capture all videos was one hour and ten minutes, 11:05am to 12:15pm local time, and all frames (except frame 1, see Process Steps below) from all videos were used. Additional attributes, including divergence, curl, shear, and strain, were calculated from the surface velocity measurements and...
These data are high-resolution bathymetry (riverbed elevation) and depth-averaged velocities in comma-delimited table format, generated from hydrographic and velocimetric surveys near highway bridge structures over the Missouri River between Kansas City and St. Louis, Missouri, May 19–26, 2021. Hydrographic data were collected using a high-resolution multibeam echosounder mapping system (MBMS), which consists of a multibeam echosounder (MBES) and an inertial navigation system (INS) mounted on a marine survey vessel. Data were collected as the vessel traversed the river along planned survey lines distributed throughout the reach. Data collection software integrated and stored the depth data from the MBES and the...
Velocity and water-quality surveys were completed along an approximately 71-mile reach of the Ohio River between Markland Locks and Dam (river mile 531.5) and McAlpine Locks and Dam (river mile 606.8) on October 27–November 4, 2016 (survey #1), and June 26–29, 2017 (survey #2). Water-quality data collected in this reach included surface measurements and vertical profiles of water temperature, specific conductance, pH, dissolved oxygen, turbidity, chlorophyll, and phycocyanin. Streamflow and velocity data were collected simultaneous to the water-quality data at cross-sections and along longitudinal lines (corresponding to the water-quality surface measurements) and at selected stationary locations (corresponding...
Categories: Data;
Tags: Indiana,
Kentucky,
Louisville,
Markland Locks and Dam,
McAlpine Locks and Dam,
Velocity and water-quality surveys were completed along an approximately 71-mile reach of the Ohio River between Markland Locks and Dam (river mile 531.5) and McAlpine Locks and Dam (river mile 606.8) on October 27–November 4, 2016 (survey #1), and June 26–29, 2017 (survey #2). Water-quality data collected in this reach included surface measurements and vertical profiles of water temperature, specific conductance, pH, dissolved oxygen, turbidity, chlorophyll, and phycocyanin. Streamflow and velocity data were collected simultaneous to the water-quality data at cross-sections and along longitudinal lines (corresponding to the water-quality surface measurements) and at selected stationary locations (corresponding...
Categories: Data;
Tags: Indiana,
Kentucky,
Louisville,
Markland Locks and Dam,
McAlpine Locks and Dam,
Note: this data release has been depecrated. Find the updated version here: https://doi.org/10.5066/P9ULGQ4W. These data are high-resolution bathymetry (riverbed elevation) and depth-averaged velocities in comma-delimited table format, generated from hydrographic and velocimetric surveys near highway bridge structures over the Missouri River between Kansas City and St. Louis, Missouri, May 19–26, 2021. Hydrographic data were collected using a high-resolution multibeam echosounder mapping system (MBMS), which consists of a multibeam echosounder (MBES) and an inertial navigation system (INS) mounted on a marine survey vessel. Data were collected as the vessel traversed the river along planned survey lines distributed...
Velocity and water-quality surveys were completed along an approximately 71-mile reach of the Ohio River between Markland Locks and Dam (river mile 531.5) and McAlpine Locks and Dam (river mile 606.8) on October 27–November 4, 2016 (survey #1), and June 26–29, 2017 (survey #2). Water-quality data collected in this reach included surface measurements and vertical profiles of water temperature, specific conductance, pH, dissolved oxygen, turbidity, chlorophyll, and phycocyanin. Streamflow and velocity data were collected simultaneous to the water-quality data at cross-sections and along longitudinal lines (corresponding to the water-quality surface measurements) and at selected stationary locations (corresponding...
Categories: Data;
Tags: Indiana,
Kentucky,
Louisville,
Markland Locks and Dam,
McAlpine Locks and Dam,
Velocity and water-quality surveys were completed along an approximately 71-mile reach of the Ohio River between Markland Locks and Dam (river mile 531.5) and McAlpine Locks and Dam (river mile 606.8) on October 27–November 4, 2016 (survey #1), and June 26–29, 2017 (survey #2). Water-quality data collected in this reach included surface measurements and vertical profiles of water temperature, specific conductance, pH, dissolved oxygen, turbidity, chlorophyll, and phycocyanin. Streamflow and velocity data were collected simultaneous to the water-quality data at cross-sections and along longitudinal lines (corresponding to the water-quality surface measurements) and at selected stationary locations (corresponding...
Categories: Data;
Tags: Indiana,
Kentucky,
Louisville,
Markland Locks and Dam,
McAlpine Locks and Dam,
Water velocities were measured along planned survey lines, which were generally perpendicular to the shoreline and spaced 100 meters apart, over an approximately 2.3-mile section of nearshore Lake Erie on June 10-12, 2019 (survey 1), and August 19-21, 2019 (survey 2), using a 1200 kHz acoustic Doppler current profiler (ADCP). The data were geo-referenced with an integrated global navigation satellite system (GNSS) smart antenna with submeter accuracy. The ADCP and GNSS antenna were mounted on a marine survey vessel, and data were collected as the survey vessel traversed the lake along planned survey lines. There was a total of 43 survey lines which typically started about 50 meters offshore and ended 500 meters...
Categories: Data;
Tags: Cleveland,
Easterly Wastewater Treatment Plant (WWTP),
Euclid Creek,
Lake Erie,
Ohio,
This data release was produced by the U.S. Geological Survey (USGS) in cooperation with the Bureau of Reclamation to present the results of monitoring efforts on the Yellowstone River fish bypass channel according to the specifications of the Lower Yellowstone Adaptive Management and Monitoring Plan. The fish bypass channel was constructed to provide upstream migrating fish with a route around a diversion dam. The objective of this study is to monitor the physical and hydraulic characteristics of the bypass channel, including flow split, minimum depth for the deepest continuous 30 cross sectional feet, and mean channel velocity, which are summarized in the data files in this data release. Physical and hydraulic...
These data are high-resolution bathymetry (riverbed elevation) and depth-averaged velocities in comma-delimited table format, generated from hydrographic and velocimetric surveys near highway bridge structures over the Missouri and Mississippi Rivers on the periphery of Missouri, June 13–22, 2021. Hydrographic data were collected using a high-resolution multibeam echosounder mapping system (MBMS), which consists of a multibeam echosounder (MBES) and an inertial navigation system (INS) mounted on a marine survey vessel. Data were collected as the vessel traversed the river along planned survey lines distributed throughout the reach. Data collection software integrated and stored the depth data from the MBES and the...
This data release provides an example data set to accompany the manuscript titled "A Robot Operating System (ROS) package for mapping flow fields in rivers via Particle Image Velocimetry (PIV)", submitted to the journal Software X. This ROS *.bag file contains remotely sensed data acquired during an Uncrewed Aircraft System (UAS) flight along a reach of the Sacramento River near Glenn, California, USA, on September 16, 2022. Cooperators on this project include the Intelligent Robotics Group from the National Aeronautics and Space Administration (NASA) Ames Research Center and the National Oceanographic and Atmospheric Administration (NOAA) Southwest Fisheries Science Center. The file bag6xs600.bag contains a single...
This data release includes the data and code used for the paper titled "A framework to facilitate development and testing of image-based river velocimetry algorithms", published in the journal Earth Surface Processes and Landforms. Three *.csv files and five *.m files with MATLAB source code are included below. Each *.csv file contains output from a hydrodynamic model of a reach of the Sacramento River near Glenn, California, with a separate file for each of three different discharges (i.e., streamflow rates): 90, 191, and 255 cubic meters per second. The hydrodynamic model used for this purpose was the Nays2DH solver available within the International River Cooperative Interface (iRIC). Provided below is a link...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: California,
Geomorphology,
Glenn,
Hydrodynamic model,
Hydrology,
Velocity and water-quality surveys were completed along an approximately 71-mile reach of the Ohio River between Markland Locks and Dam (river mile 531.5) and McAlpine Locks and Dam (river mile 606.8) on October 27–November 4, 2016 (survey #1), and June 26–29, 2017 (survey #2). Water-quality data collected in this reach included surface measurements and vertical profiles of water temperature, specific conductance, pH, dissolved oxygen, turbidity, chlorophyll, and phycocyanin. Streamflow and velocity data were collected simultaneous to the water-quality data at cross-sections and along longitudinal lines (corresponding to the water-quality surface measurements) and at selected stationary locations (corresponding...
Categories: Data;
Tags: Indiana,
Kentucky,
Louisville,
Markland Locks and Dam,
McAlpine Locks and Dam,
Velocity and water-quality surveys were completed along an approximately 71-mile reach of the Ohio River between Markland Locks and Dam (river mile 531.5) and McAlpine Locks and Dam (river mile 606.8) on October 27–November 4, 2016 (survey #1), and June 26–29, 2017 (survey #2). Water-quality data collected in this reach included surface measurements and vertical profiles of water temperature, specific conductance, pH, dissolved oxygen, turbidity, chlorophyll, and phycocyanin. Streamflow and velocity data were collected simultaneous to the water-quality data at cross-sections and along longitudinal lines (corresponding to the water-quality surface measurements) and at selected stationary locations (corresponding...
|
|
