Filters: Tags: Wind (X) > Extensions: ArcGIS Service Definition (X)
4 results (38ms)|
Filters
Date Range
Types Contacts
Categories Tag Types Tag Schemes |
The goal of this project is to provide a preliminary overview, at a National scale, the relative susceptibility of the Nation's coast to sea- level rise through the use of a coastal vulnerability index (CVI). This initial classification is based upon the variables geomorphology, regional coastal slope, tide range, wave height, relative sea-level rise and shoreline erosion and accretion rates. The combination of these variables and the association of these variables to each other furnish a broad overview of regions where physical changes are likely to occur due to sea-level rise.
Categories: Data;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Downloadable,
Map Service;
Tags: Alabama,
Beach,
Beach Erosion,
Coastal Geomorphology,
Coastal Hazards,
The goal of this project is to provide a preliminary overview, at a National scale, the relative susceptibility of the Nation's coast to sea- level rise through the use of a coastal vulnerability index (CVI). This initial classification is based upon the variables geomorphology, regional coastal slope, tide range, wave height, relative sea-level rise and shoreline erosion and accretion rates. The combination of these variables and the association of these variables to each other furnish a broad overview of regions where physical changes are likely to occur due to sea-level rise.
Categories: Data;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Downloadable,
Map Service;
Tags: Alabama,
Beach,
Beach Erosion,
Coastal Geomorphology,
Coastal Hazards,
This data shows the data provided from NOAA. The data shows the Mean Sea Level Trends at the designated monitoring stations along the the Gulf Coast.
Categories: Data;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Downloadable,
Map Service;
Tags: Coastal processes,
Gulf of Mexico,
inundation,
sea level rise,
sea level trends,
This dataset provides an estimate of annual wind resources for the Northeast. It was developed by the National Renewable Energy Laboratory of the U.S. Department of Energy. The wind power classes are described in the attached table. Areas designated class 3 or greater are suitable for most utility-scale wind turbine applications, whereas class 2 areas are marginal for utility-scale applications but may be suitable for rural applications. Class 1 areas are generally not suitable, although a few locations (e.g. exposed hilltops not shown on the maps) with adequate wind resource for wind turbine applications may exist in some class 1 areas. The degree of certainty with which the wind power class can be specified depends...
Categories: Data;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Downloadable,
Map Service;
Tags: NREL,
wind,
wind speed
|
|
