Filters: Tags: acoustic doppler current profiling (X)
118 results (238ms)|
Filters
Date Range
Extensions Types Contacts
Categories Tag Types
|
Bathymetric survey data of the Brandon Road Dam spillway was collected on May 27 and May 28, 2015 by the US Geological Survey (USGS) using Trimble Real-Time Kinematic Global Positioning System (RTK-GPS) equipment. The base station was set up over a temporarily installed survey pin on both days. This pin was surveyed into an existing NGS benchmark (PID: BBCN12) within the Brandon Road Lock property. In wadeable sections, a GPS rover with 2.0 meter range pole and flat-foot was deployed. In sections unable to be waded, a 2.0 meter range pole was fix-mounted to a jon boat, and a boat-mounted Acoustic Doppler Current Profiler (ADCP) was used to collect the depth data. ADCP depth data were reviewed in the WinRiver II...
In 2016, the U.S. Fish and Wildlife Service, U.S. Geological Survey, and U.S. Army Corps of Engineers undertook a large-scale interagency field study to determine the influence of commercial barge vessels on the efficacy of the Electric Dispersal Barrier System (EDBS) in the Chicago Sanitary and Ship Canal (CSSC) in preventing fish passage. This study included a series of trials in which a tow, consisting of a tug vessel and six fully-loaded barges, transited the EDBS in both upstream-bound (n = 23) and downstream-bound (n = 22) directions. A 3,000 kHz SonTek Argonaut SW Acoustic Doppler Velocity Meter (ADVM) was mounted on the barge at the position of the rake-to-box junction. The ADVM faced outward from the side...
In 2016, the U.S. Fish and Wildlife Service, U.S. Geological Survey, and U.S. Army Corps of Engineers undertook a large-scale interagency field study to determine the influence of commercial barge vessels on the efficacy of the Electric Dispersal Barrier System (EDBS) in the Chicago Sanitary and Ship Canal (CSSC) in preventing fish passage. This study included a series of trials in which a tow, consisting of a tug vessel and six fully-loaded barges, transited the EDBS in both upstream-bound (n = 23) and downstream-bound (n = 22) directions. A 1,200 kHz Teledyne RDI Channel Master Acoustic Doppler Velocity Meter (ADVM) was mounted on the barge at the position of the rake-to-box junction. The ADVM faced outward from...
Geo-referenced two-dimensional velocity profiles collected at a single cross-section in the upper Sacramento River Deep Water Ship Channel. Data were collected over a range of river conditions, collected hourly for 30 hours, with four 30-hours studies collected over four consecutive weeks in July and August 2019. Data are available as .csv files contained in the attached .zip file.
Water velocities and discharge were measured in the lock chamber and immediately downstream of Brandon Road Lock on the Des Plaines River at river mile 286 on December 9-10, 2014 using Teledyne RDI Rio Grande 600 and 1200 kHz acoustic Doppler current profilers (ADCP). The data were georeferenced with a differential GPS receiver with submeter accuracy. These ADCP measurements were collected in support of the US Army Corps of Engineers Great Lakes and Mississippi River Interbasin Study (GLMRIS). Velocity measurements were processed using the Velocity Mapping Toolbox (Parsons and others, 2013) to derive temporally- and spatially-averaged water velocity values. Discharge measurements were processed with the QRev discharge...
Categories: Data;
Types: Citation;
Tags: Brandon Road Lock and Dam,
Des Plaines River,
Illinois,
Joliet,
Rockdale,
These geospatial data were collected during the July 13 and July 27, 2016 topographic and hydrographic survey of the Gallatin River at I-90 near Manhattan, MT.
These geospatial data were collected during the May 24, 2017 topographic and hydrographic survey of Saddle River in the vicinity of New Jersey State Route 17 at Ridgewood, NJ.
These geospatial data were collected during the August 30, 2016 topographic and hydrographic survey of the Wapsipinicon River in the vicinity of US-30 near near Wheatland, IA.
These geospatial data were collected during the August 30, 2016 topographic and hydrographic survey of the Upper Iowa River in the vicinity of IA-76 near Dorchester, IA.
These geospatial data were collected during the May 30-31, 2017 topographic and hydrographic survey of the Snake River at West River Road near Shelley, ID.
Hydroacoustic (sonar) data were collected for the Mississippi, St. Croix, and Minnesota Rivers for the development of high-resolution bathymetry and sidescan imagery. Small areas containing priority mussel habitat had additional collection efforts to map water velocities and bottom composition. Combining these data in a GIS can provide key components to characterizing physical benthic habitat for native mussels in a riverine environment. These information needs were highly desired by the National Park Service to more accurately assess environmental factors that influence native mussel distribution. The collaborative effort was funded by the Legislative-Citizen Commission on Minnesota Resources (LCCMR) Environment...
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: Benthic/Attached Biota,
Minnesota,
National Park,
Physical Habitats and Geomorphology,
St. Croix River,
The table provides all fish collected using two different electrofishing methods at Illinois River sites in 2012 and 2013. Length and weights were taken on most species and gender was taken from Silver Carp. Fishes were categorized whether they were netters (caught by nets) or jumpers (jumped in the boat while sampling) and only netters were used in analyses. Large numbers of shad were collected in 2013 and an additional spreadsheet includes abundance data in an aggregated form for those sites. The data is not sensitive/classified and there are no legal restrictions on who may obtain or use the data.
Categories: Data;
Types: Citation;
Tags: Fishes,
Fishing with Benthic Mobile Gear,
Illinois,
Illinois River,
Native fish community,
This dataset is a digital elevation model (DEM) of the bathymetry for six sites where known rock structures exist in the St. Croix River. The DEMs have a 10-cm resolution (Boom site is 0.5-m) to provide ultra-high-resolution elevations for investigating the use of hydroacoustic technologies for quantifying habitat for imperiled mussels Spectaclecase (Margaritifera monodonta) and Salamander (Simpsonaias ambigua) typically associated with rock structures (e.g., wing dams, revetment) in rivers. Bathymetry is essential for providing the depths and shapes of underwater terrain and it represents the three-dimensional features (or relief) of underwater terrain. Multibeam sonar data were collected using a Norbit integrated...
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: Minnesota,
Rock Outcrop,
Rock Substrate,
St. Croix River,
USGS-EMA-LOW-SB SMC: Freshwater mussels,
A variety of new technologies are being evaluated to mitigate the spread of invasive carps from the Illinois River to the Great Lakes. In 2022, the U.S. Army Corps of Engineers, U.S. Fish and Wildlife Service, and U.S. Geological Survey undertook a field-scale interagency study to determine the efficacy of an Automated Barge Clearing Deterrent (ABCD) in flushing live fish away from commercial barge vessels entering Peoria Lock on the Illinois River. The ABCD is a forced air manifold system that is placed at the channel bed to create a longitudinal array of bubble plumes. In support of this study, the bathymetry (bottom elevation) of the downstream approach to Peoria Lock, near Peoria, Illinois, was surveyed several...
Tidal water discharge within two breaches constructed in a former flood-control levee of a restored agricultural area in Port Susan, Washington, was measured repeatedly during several tidal cycles. Measurements were made on March 27, 2014, April 16, 2014, May 18, 2014, and May 29, 2014 at breach PSB1, and on May 29, 2014 at breach PSB2. These data were collected using a boat-mounted Teledyne RDI RiverRay 600 kHz acoustic Doppler current profiler (ADCP) or a Teledyne RDI StreamPro 2000 kHz ADCP, depending on date. ADCP transect data were collected and initially reviewed using WinRiver II software and reprocessing and final review was completed with QRev software.
Cladophora biomass and supporting data collected in the Great Lakes, 2018 (ver. 1.1, September 2020)
Note: An error was discovered in the BenthicBiomas Table, mostly in designation of BDLs and zeros. Data are undergoing further QC and the corrected dataset will be posted soon. This dataset records Cladophora and associated submerged aquatic vegetation (SAV) biomass collected approximately monthly during the growing season of 2018 at stations located along the U.S. shoreline of Lakes Michigan, Huron, Erie, and Ontario. It also records a variety of supporting data collected at Cladophora measurement stations. These supporting data include: - seasonal time series of light, currents, wave action, temperature, specific conductivity, turbidity, pH, phycocyanin, chlorophyll, and dissolved oxygen from moored sensors...
Categories: Data,
Data Release - Revised;
Tags: Aquatic Biology,
CTD measurement,
Ecology,
Great Lakes Region,
Lake Erie,
This child item contains the Mathworks Matlab mat-file outputs from the scripts described in the Ancillary Scripts child item. Each file contains the results for a particular field site. See the FGDC metadata Process Steps section for more information about opening these files. The mat-files included here have a standard set of output variables and include a variable named "zzVariableDescriptions" in each mat-file which describes the contents of the file. The following variables and descriptions are included in each mat-file (extracted from the "zzVariableDescriptions" variable): calibration_distance: The distance between calibration points in meters. calibration_points: Pixel coordinates of the calibration points....
This child item contains Mathworks MATLAB script files which reproduce the processing steps for each dataset. The following scripts are included: MATLAB scripts to process the images extracted from sUAS videos for each site. See the FGDC metadata Data Quality Section Process Step 1 for details on these scripts: ACR_PIVLab_Script.m AFR_PIVLab_Script.m CCC_PIVLab_Script.m CMC_PIVLab_Script.m GLR_PIVLab_Script.m RMC_PIVLab_Script.m SMC_PIVLab_Script.m WMD_PIVLab_Script.m MATLAB scripts to post process the data into the form supplied in this data release. See the FGDC metadata Data Quality Section Process Steps 2 and 3 for details on these scripts: CalibrateData.m CreatePlots.m Each Field Site is abbreviated in...
From May 2017 to November 2019, the U.S. Geological Survey conducted bathymetric surveys of New York City's East of Hudson Reservoirs. Bathymetry data were collected at West Branch Reservoir during September 2017, October 2017, and October 2019. Depth data were collected primarily with a multibeam echosounder; additional bathymetry points were measured using an acoustic Doppler current profiler (ADCP). Quality assurance points were measured with a single-beam echosounder. Water surface elevations were established using real-time kinematic (RTK) and static global navigation satellite system (GNSS) surveys and submersible pressure transducers. Measured sound velocity profiles were used to correct echosounder depth...
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Raster,
Shapefile;
Tags: Ambient Monitoring,
Basin & Hydrogeologic Characterization,
New York,
Putnam County,
Water Use and Availability Science,
The dataset contains data collected with an acoustic Doppler current profiler (ADCP) for a reach of the Missouri River at Sheepnose Bend downstream from Lexington, Missouri. Velocity data was collected using a TeleDyne Marine RD Instruments (Poway, California) Rio Grande Workhorse 600 kilohertz ADCP on June 4, 2020. Positioning used a Trimble Real-Time-Kinematic Global Navigation Satellite System. This data release consists of one shapefile with depth-averaged velocity magnitude and direction data and 40 text files that contain processed ascii velocity data exported from WinRIver II, Teledyne Marine RD Insturments (Poway, California) ADCP software.
|
|
