Skip to main content
Advanced Search

Filters: Tags: bedrock (X) > partyWithName: U.S. Geological Survey - ScienceBase (X)

14 results (48ms)   

View Results as: JSON ATOM CSV
thumbnail
This raster depicts the percentage of lithological the hydraulic conductivity (in micrometers per second) of surface or near surface geology. We derived these rasters by calculating the average conductivity for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater...
thumbnail
The US Geological Survey, in cooperation with the National Park Service, mapped 35 7.5-minute quadrangles, within a 2-mile-wide+ corridor centered on the Parkway, from BLRI (Blue Ridge Parkway) Mile Post (MP) 0 near Afton, Virginia southward to MP 218 at Cumberland Knob, approximately 1.3 km south of the Virginia – North Carolina State Line. Detailed bedrock geologic mapping for this project was conducted at 1:24,000-scale by systematically traversing roads, trails, creeks, and ridges within and adjacent to the 2-mile-wide+ corridor along the 216.9-mile length of the BLRI in Virginia. Geologic data at more than 23,000 station points were collected during this project (September 2009 – February 2014), with approximately...
Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: Adney Gap, Air Bellows Gap, Alligator Back Formation, Antietam Formation, Ashe Formation, All tags...
thumbnail
The US Geological Survey, in cooperation with the National Park Service, mapped 35 7.5-minute quadrangles, within a 2-mile-wide+ corridor centered on the Parkway, from BLRI (Blue Ridge Parkway) Mile Post (MP) 0 near Afton, Virginia southward to MP 218 at Cumberland Knob, approximately 1.3 km south of the Virginia – North Carolina State Line. Detailed bedrock geologic mapping for this project was conducted at 1:24,000-scale by systematically traversing roads, trails, creeks, and ridges within and adjacent to the 2-mile-wide+ corridor along the 216.9-mile length of the BLRI in Virginia. Geologic data at more than 23,000 station points were collected during this project (September 2009 – February 2014), with approximately...
Types: Citation; Tags: Adney Gap, Air Bellows Gap, Alligator Back Formation, Antietam Formation, Ashe Formation, All tags...
This workbook summarizes geophysical data for each lithology contained within the USGS Preliminary Integrated Geologic Map Databases for the United States (Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272). The summarized geophysical data contained in the “Lith Summary” spreadsheet (tab) is used to translate lithologies in state geologic maps into maps of continuous physical characteristics (see Geochemical and Geophysical Characteristics of the Conterminous United States, http://dx.doi.org/10.5066/F7X0653P). Full details of the data are provided in the “ReadMe” spreadsheet at the beginning of the workbook.
thumbnail
This raster depicts the percentage of lithological magnesium oxide (MgO) content in surface or near surface geology. We derived these rasters by calculating the average percent MgO content for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater than 100 feet (from...
thumbnail
This raster depicts the percentage of lithological the compressive strength, measured as uniaxial compressive strength (in megaPascals, MPa) of surface or near surface geology. We derived these rasters by calculating the average strength for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map...
thumbnail
This raster depicts the percentage of lithological aluminum oxide (Al2O3) content in surface or near surface geology. We derived these rasters by calculating the average percent Al2O3 content for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater than 100 feet (from...
thumbnail
This raster depicts the percentage of lithological sulfur (S) content in surface or near surface geology. We derived these rasters by calculating the average percent S content for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater than 100 feet (from Soller et al....
thumbnail
This raster depicts the percentage of lithological nitrogen (N) content in surface or near surface geology. We derived these rasters by calculating the average percent N content for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater than 100 feet (from Soller et...
thumbnail
This raster depicts the percentage of lithological phosphorus pentoxide (P2O5) content in surface or near surface geology. We derived these rasters by calculating the average percent P2O5 content for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater than 100 feet...
thumbnail
This raster depicts the percentage of lithological silicon dioxide (SiO2) content in surface or near surface geology. We derived these rasters by calculating the average percent SiO2 content for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater than 100 feet (from...
thumbnail
This raster depicts the percentage of lithological sodium oxide (Na2O) content in surface or near surface geology. We derived these rasters by calculating the average percent Na2O content for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater than 100 feet (from...
thumbnail
This raster depicts the percentage of lithological ferric oxide (Fe2O3) content in surface or near surface geology. We derived these rasters by calculating the average percent Fe2O3 content for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater than 100 feet (from...
This workbook summarizes geochemical data for each lithology contained within the USGS Preliminary Integrated Geologic Map Databases for the United States (Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272). The summarized geochemical data contained in the “Lith Summary” spreadsheet (tab) is used to translate lithologies in state geologic maps into maps of continuous chemical characteristics (see Geochemical and Geophysical Characteristics of the Conterminous United States, http://dx.doi.org/10.5066/F7X0653P). Full details of the data are provided in the “ReadMe” spreadsheet at the beginning of the workbook.
Categories: Data; Types: Citation; Tags: Bedrock, Geochemical, Geology


    map background search result map search result map Geochemical Characteristics of the Conterminous United States: % MgO Geochemical Characteristics of the Conterminous United States: % P2O5 Geophysical Characteristics of the Conterminous United States: Uniaxial Compressive Strength (MPa) Geophysical Characteristics of the Conterminous United States: Hydraulic Conductivity (µm/s) Geochemical Characteristics of the Conterminous United States: % Sulfur Geochemical Characteristics of the Conterminous United States: % SiO2 Geochemical Characteristics of the Conterminous United States: % Na2O Geochemical Characteristics of the Conterminous United States: % Al2O3 Geochemical Characteristics of the Conterminous United States: % Fe2O3 Geochemical Characteristics of the Conterminous United States: % Nitrogen Detailed geologic mapping geodatabase for the Blue Ridge Parkway in Virginia with station point photographs Detailed geologic mapping geodatabase for the Blue Ridge Parkway in Virginia Detailed geologic mapping geodatabase for the Blue Ridge Parkway in Virginia with station point photographs Detailed geologic mapping geodatabase for the Blue Ridge Parkway in Virginia Geochemical Characteristics of the Conterminous United States: % MgO Geochemical Characteristics of the Conterminous United States: % P2O5 Geophysical Characteristics of the Conterminous United States: Uniaxial Compressive Strength (MPa) Geophysical Characteristics of the Conterminous United States: Hydraulic Conductivity (µm/s) Geochemical Characteristics of the Conterminous United States: % Sulfur Geochemical Characteristics of the Conterminous United States: % SiO2 Geochemical Characteristics of the Conterminous United States: % Na2O Geochemical Characteristics of the Conterminous United States: % Al2O3 Geochemical Characteristics of the Conterminous United States: % Fe2O3 Geochemical Characteristics of the Conterminous United States: % Nitrogen