2016 Mw 6.0 Petermann Ranges earthquake, Australia: Pre- and post-earthquake digital elevation models

We generated digital elevation models (DEMs) using pre- and post-event in-track stereo 0.5 m resolution panchromatic Worldview 1 and 2 images (©2019, DigitalGlobe) using the Surface Extraction from TIN-based Searchspace Minimization (SETSM) software [Noh and Howat, 2015] running on the University of Iowa Argon supercomputer (Table S1). The post-event DEMs exhibit along-track striping artifacts common to the Worldview 2 sensor. While de-striping tools, for example within NASAs Ames Stereo Pipeline [Shean et al., 2016], are commonly applied to resolve this issue, a de-striping correction has not been developed for this latitude. Noh, M.-J., and I. M. Howat (2015), Automated stereo-photogrammetric DEM generation...

Tags: DSM, EHP, Earthquake Hazards Program, GHSC, Geologic Hazards Science Center, All tags... Geomorphology, Geophysics, Petermann Ranges, Australia, USGS, USGS Science Data Catalog (SDC), digital surface models, earth science, earthquake hazard, Fewer tags

Digital Surface Models for the northern 16 km of the 1983 Borah Peak earthquake rupture, northern Lost River fault zone (Idaho, USA)

We present high-resolution (10-cm pixel) digital surface models (DSMs) generated for the northern 16 km of the surface rupture associated with the 1983 Mw 6.9 Borah Peak earthquake. These DSMs were generated using Agisoft Photoscan (and Metashape) image-based modeling software and low-altitude aerial photographs acquired from unmanned aircraft systems and a tethered balloon. DSM files consist of GeoTIFFs with georeferencing information stored in the file headers.

Tags: Borah Peak, Idaho, DSM, EHP, Earthquake Hazards Program, GHSC, All tags... Geologic Hazards Science Center, Geophysics, Seismology, USGS, USGS Science Data Catalog (SDC), digital surface models, earth science, earthquake hazard, Fewer tags

Digital elevation models (DEMs) of coastal North Carolina, from 2019-09-08 to 2019-09-13, Post-Hurricane Dorian

Digital elevation models (DEMs) were created from aerial imagery collected between September 08 and September 13, 2019, along the North Carolina coast between the Virginia-North Carolina border vicinity and Cape Lookout, North Carolina. These DEMs were created to document ground conditions post-Hurricane Dorian, which made landfall on the North Carolina coast on September 6, 2019. The DEMs help researchers estimate the land surface after Hurricane Dorian and were created to document inter-annual changes in shoreline position and coastal morphology in response to storm events using aerial imagery collections and a structure from motion (SFM) workflow. These data can be used with geographic information systems or...

Tags: Atlantic Ocean, Bathymetry and Elevation, Beaufort Inlet, CMHRP, Cape Hatteras, All tags... Cape Lookout, Coastal and Marine Hazards and Resources Program, Commonwealth of Virginia, Duck (1025292), Hatteras Inlet, Hurricane Dorian, Ocracoke Inlet, Ophelia Inlet, Oregon Inlet, Outer Banks, PCMSC, Pacific Coastal and Marine Science Center, Pamlico Sound, Physical Habitats and Geomorphology, Remote Sensing Coastal Change, SPCMSC, Saint Petersburg Coastal and Marine Science Center, State of North Carolina, U.S. Geological Survey, USGS, WHCMSC, Woods Hole Coastal and Marine Science Center, barrier island, beach, coastal processes, digital elevation models, digital surface models, earth sciences, fragile ecosystems, geographic information systems (GIS), geography, geomorphology, geoscientificInformation, geospatial datasets, hurricanes, hurricanes and typhoons, imageryBaseMapsEarthCover, oceans, remote sensing, remote sensing, structure from motion, Fewer tags

Digital elevation models (DEMs) of coastal North Carolina, from 2019-08-30 to 2019-09-02, Pre-Hurricane Dorian

Digital elevation models (DEMs) were created from aerial imagery collected between August 30 and September 2, 2019, along the North Carolina coast between the Virginia-North Carolina border vicinity and Cape Lookout, North Carolina. These DEMs were created to document ground conditions prior to Hurricane Dorian, which made landfall on the North Carolina coast on September 6, 2019. The digital elevation models (DEMs) help researchers estimate the land surface before Hurricane Dorian and were created to document inter-annual changes in shoreline position and coastal morphology in response to storm events using aerial imagery collections and a structure from motion (SFM) workflow. These data can be used with geographic...

Tags: Atlantic Ocean, Bathymetry and Elevation, Beaufort Inlet, CMHRP, Cape Hatteras, All tags... Cape Lookout, Coastal and Marine Hazards and Resources Program, Commonwealth of Virginia, Duck (1025292), Hatteras Inlet, Hurricane Dorian, Ocracoke Inlet, Ophelia Inlet, Oregon Inlet, Outer Banks, PCMSC, Pacific Coastal and Marine Science Center, Pamlico Sound, Physical Habitats and Geomorphology, Remote Sensing Coastal Change, SPCMSC, Saint Petersburg Coastal and Marine Science Center, State of North Carolina, U.S. Geological Survey, USGS, WHCMSC, Woods Hole Coastal and Marine Science Center, barrier island, beach, coastal processes, digital elevation models, digital surface models, earth sciences, fragile ecosystems, geographic information systems (GIS), geography, geomorphology, geoscientificInformation, geospatial datasets, hurricanes, hurricanes and typhoons, imageryBaseMapsEarthCover, oceans, remote sensing, remote sensing, structure from motion, Fewer tags

Digital elevation models (DEMs) of coastal North Carolina, from 2020-05-08 to 2020-05-09

Digital elevation models (DEMs) were created from aerial imagery collected May 08 and 09, 2020, along the North Carolina coast between the Virginia-North Carolina border vicinity and Cape Lookout, North Carolina. These DEMs were created to document recovery ground conditions after Hurricane Dorian, which made landfall on the North Carolina coast on September 6, 2019. The DEMs help researchers document inter-annual changes in shoreline position and coastal morphology in response to storm events using aerial imagery collections and a structure from motion (SFM) workflow. These data can be used with geographic information systems or other software to identify topographic and shallow-water bathymetric features.

Tags: Atlantic Ocean, Bathymetry and Elevation, Beaufort Inlet, CMHRP, Cape Hatteras, All tags... Cape Lookout, Coastal and Marine Hazards and Resources Program, Commonwealth of Virginia, Duck (1025292), Hatteras Inlet, Hurricane Dorian, Ocracoke Inlet, Ophelia Inlet, Oregon Inlet, Outer Banks, PCMSC, Pacific Coastal and Marine Science Center, Pamlico Sound, Physical Habitats and Geomorphology, Remote Sensing Coastal Change, SPCMSC, Saint Petersburg Coastal and Marine Science Center, State of North Carolina, U.S. Geological Survey, USGS, WHCMSC, Woods Hole Coastal and Marine Science Center, barrier island, beach, coastal processes, digital elevation models, digital surface models, earth sciences, fragile ecosystems, geographic information systems (GIS), geography, geomorphology, geoscientificInformation, geospatial datasets, hurricanes, hurricanes and typhoons, imageryBaseMapsEarthCover, oceans, remote sensing, remote sensing, structure from motion, Fewer tags

Digital elevation models (DEMs) of coastal North Carolina, from 2020-02-08 to 2020-02-09

Digital elevation models (DEMs) were created from aerial imagery collected February 08 and 09, 2020, along the North Carolina coast between the Virginia-North Carolina border vicinity and Cape Lookout, North Carolina. These DEMs were created to document recovery ground conditions after Hurricane Dorian, which made landfall on the North Carolina coast on September 6, 2019. The DEMs help researchers document inter-annual changes in shoreline position and coastal morphology in response to storm events using aerial imagery collections and a structure from motion (SFM) workflow. These data can be used with geographic information systems or other software to identify topographic and shallow-water bathymetric features.

Tags: Atlantic Ocean, Bathymetry and Elevation, Beaufort Inlet, CMHRP, Cape Hatteras, All tags... Cape Lookout, Coastal and Marine Hazards and Resources Program, Commonwealth of Virginia, Duck (1025292), Hatteras Inlet, Hurricane Dorian, Ocracoke Inlet, Ophelia Inlet, Oregon Inlet, Outer Banks, PCMSC, Pacific Coastal and Marine Science Center, Pamlico Sound, Physical Habitats and Geomorphology, Remote Sensing Coastal Change, SPCMSC, Saint Petersburg Coastal and Marine Science Center, State of North Carolina, U.S. Geological Survey, USGS, WHCMSC, Woods Hole Coastal and Marine Science Center, barrier island, beach, coastal processes, digital elevation models, digital surface models, earth sciences, fragile ecosystems, geographic information systems (GIS), geography, geomorphology, geoscientificInformation, geospatial datasets, hurricanes, hurricanes and typhoons, imageryBaseMapsEarthCover, oceans, remote sensing, remote sensing, structure from motion, Fewer tags

Digital elevation models (DEMs) of coastal North Carolina, on 2019-11-26, two-months Post-Hurricane Dorian

Digital elevation models (DEMs) were created from aerial imagery collected November 26, 2019, along the North Carolina coast between the Virginia-North Carolina border vicinity and Cape Lookout, North Carolina. These DEMs were created to document ground conditions two-months after Hurricane Dorian, which made landfall on the North Carolina coast on September 6, 2019. The DEMs help researchers estimate the land surface one-month post-Hurricane Dorian and were created to document inter-annual changes in shoreline position and coastal morphology in response to storm events using aerial imagery collections and a structure from motion (SFM) workflow. These data can be used with geographic information systems or other...

Tags: Atlantic Ocean, Bathymetry and Elevation, Beaufort Inlet, CMHRP, Cape Hatteras, All tags... Cape Lookout, Coastal and Marine Hazards and Resources Program, Commonwealth of Virginia, Duck (1025292), Hatteras Inlet, Hurricane Dorian, Ocracoke Inlet, Ophelia Inlet, Oregon Inlet, Outer Banks, PCMSC, Pacific Coastal and Marine Science Center, Pamlico Sound, Physical Habitats and Geomorphology, Remote Sensing Coastal Change, SPCMSC, Saint Petersburg Coastal and Marine Science Center, State of North Carolina, U.S. Geological Survey, USGS, WHCMSC, Woods Hole Coastal and Marine Science Center, barrier island, beach, coastal processes, digital elevation models, digital surface models, earth sciences, fragile ecosystems, geographic information systems (GIS), geography, geomorphology, geoscientificInformation, geospatial datasets, hurricanes, hurricanes and typhoons, imageryBaseMapsEarthCover, oceans, remote sensing, remote sensing, structure from motion, Fewer tags

Digital elevation models (DEMs) of coastal North Carolina, on 2019-10-11, one month Post-Hurricane Dorian

Digital elevation models (DEMs) were created from aerial imagery collected October 11, 2019, along the North Carolina coast between the Virginia-North Carolina border vicinity and Cape Lookout, North Carolina. These DEMs were created to document ground conditions one-month after Hurricane Dorian, which made landfall on the North Carolina coast on September 6, 2019. The DEMs help researchers estimate the land surface one-month post-Hurricane Dorian and were created to document inter-annual changes in shoreline position and coastal morphology in response to storm events using aerial imagery collections and a structure from motion (SFM) workflow. These data can be used with geographic information systems or other software...

Tags: Atlantic Ocean, Bathymetry and Elevation, Beaufort Inlet, CMHRP, Cape Hatteras, All tags... Cape Lookout, Coastal and Marine Hazards and Resources Program, Commonwealth of Virginia, Duck (1025292), Hatteras Inlet, Hurricane Dorian, Ocracoke Inlet, Ophelia Inlet, Oregon Inlet, Outer Banks, PCMSC, Pacific Coastal and Marine Science Center, Pamlico Sound, Physical Habitats and Geomorphology, Remote Sensing Coastal Change, SPCMSC, Saint Petersburg Coastal and Marine Science Center, State of North Carolina, U.S. Geological Survey, USGS, WHCMSC, Woods Hole Coastal and Marine Science Center, barrier island, beach, coastal processes, digital elevation models, digital surface models, earth sciences, fragile ecosystems, geographic information systems (GIS), geography, geomorphology, geoscientificInformation, geospatial datasets, hurricanes, hurricanes and typhoons, imageryBaseMapsEarthCover, oceans, remote sensing, remote sensing, structure from motion, Fewer tags

RGB-averaged orthoimagery of coastal North Carolina, from 2020-05-08 to 2020-05-09

RGB-averaged orthoimages were created from aerial imagery collected May 08 and 09, 2020, along the North Carolina coast between the Virginia-North Carolina border vicinity and Cape Lookout, North Carolina. These RGB-averaged orthoimages were created to document recovery ground conditions after Hurricane Dorian, which made landfall on the North Carolina coast on September 6, 2019. The RGB-averaged orthoimages help researchers document inter-annual changes in shoreline position and coastal morphology in response to storm events using aerial imagery collections and a structure from motion (SFM) workflow. These data can be used with geographic information systems or other software to identify topographic and shallow-water...

Tags: Atlantic Ocean, Bathymetry and Elevation, Beaufort Inlet, CMHRP, Cape Hatteras, All tags... Cape Lookout, Coastal and Marine Hazards and Resources Program, Commonwealth of Virginia, Duck (1025292), Hatteras Inlet, Hurricane Dorian, Ocracoke Inlet, Ophelia Inlet, Oregon Inlet, Outer Banks, PCMSC, Pacific Coastal and Marine Science Center, Pamlico Sound, Physical Habitats and Geomorphology, Remote Sensing Coastal Change, SPCMSC, Saint Petersburg Coastal and Marine Science Center, State of North Carolina, U.S. Geological Survey, USGS, WHCMSC, Woods Hole Coastal and Marine Science Center, barrier island, beach, coastal processes, digital elevation models, digital surface models, earth sciences, fragile ecosystems, geographic information systems (GIS), geography, geomorphology, geoscientificInformation, geospatial datasets, hurricanes, hurricanes and typhoons, imageryBaseMapsEarthCover, oceans, remote sensing, remote sensing, structure from motion, Fewer tags