Filters: Tags: elevation (X) > Extensions: ArcGIS Service Definition (X)
35 results (69ms)
Filters
Date Range
Extensions Types
Contacts
Categories Tag Types
|
This dataset depicts 10 foot contours derived from the USGS 1/3 arc second (10m) digital elevation model.
Categories: Data;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Citation,
Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Klamath Marsh NWR,
Oregon (OR),
USFWS,
contours,
elevation,
Hurricane Sandy, which made landfall on October 29, 2012, near Brigantine, New Jersey, had a significant impact on coastal New Jersey, including the large areas of emergent wetlands at Edwin B. Forsythe National Wildlife Refuge (NWR) and the Barnegat Bay region. In response to Hurricane Sandy, U.S. Geological Survey (USGS) has undertaken several projects to assess the impacts of the storm and provide data and scientific analysis to support recovery and restoration efforts. As part of these efforts, the USGS Coastal and Marine Geology Program (CMGP) sponsored Coastal National Elevation Database (CoNED) Applications Project in collaboration with the USGS National Geospatial Program (NGP), and National Oceanic and...
Categories: Data;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Citation,
Downloadable,
Map Service;
Tags: Barnegat Bay,
Edwin B. Forsythe National Wildlife Refuge,
Elevation,
Environment,
LIDAR,
Lidar-derived digital elevation models often contain a vertical bias due to vegetation. In areas with tidal influence the amount of bias can be ecologically significant, for example, by decreasing the expected inundation frequency. We generated a corrected digital elevation mode (DEM) for Suisun marsh using a modification of the Lidar Elevation Adjustment with NDVI (LEAN) technique (Buffington et al. 2016). GPS survey data (6912 points, collected across public and private land in 2018), Normalized Difference Vegetation Index (NDVI) derived from an airborne multispectral image (June 2018), a 1 m lidar DEM from September 2018, and a 1 m canopy surface model were used to generate models of predicted bias across the...
These data were created as part of the National Oceanic and Atmospheric Administration Coastal Services Center's efforts to create an online mapping viewer depicting potential sea level rise and its associated impacts on the nation's coastal areas. The purpose of the mapping viewer is to provide coastal managers and scientists with a preliminary look at sea level rise (slr) and coastal flooding impacts. The viewer is a screening-level tool that uses nationally consistent data sets and analyses.Data and maps provided can be used at several scales to help gauge trends and prioritize actions for different scenarios. The Sea Level Rise and Coastal Flooding Impacts Viewer may be accessed at: http://www.csc.noaa.gov/slr...
These data were created as part of the National Oceanic and Atmospheric Administration Coastal Services Center's efforts to create an online mapping viewer depicting potential sea level rise and its associated impacts on the nation's coastal areas. The purpose of the mapping viewer is to provide coastal managers and scientists with a preliminary look at sea level rise (slr) and coastal flooding impacts. The viewer is a screening-level tool that uses nationally consistent data sets and analyses.Data and maps provided can be used at several scales to help gauge trends and prioritize actions for different scenarios. The Sea Level Rise and Coastal Flooding Impacts Viewer may be accessed at: http://www.csc.noaa.gov/slr...
Surveys of the bathymetry and backscatter intensity of the sea floor of the Historic Area Remediation Site (HARS), offshore of New York and New Jersey, were carried out in 1996, 1998, and 2000 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The objective of the multiple echosounder surveys was to map the bathymetry and surficial sediments over time as dredged material was placed in the HARS to remediate contaminated sediments. Maps derived from the multibeam surveys show sea-floor bathymetry, shaded-relief bathymetry, and backscatter intensity (a measure of sea-floor texture and roughness) at a spatial resolution of 3 meters. The area was mapped by the U.S....
The Hudson Canyon begins on the outer continental shelf off the east coast of the United States at about 100-meters (m) water depth and extends offshore southeastward across the continental slope and rise. A multibeam survey was carried out in 2002 to map the bathymetry and backscatter intensity of the sea floor of the Hudson Canyon and adjacent slope and rise. The survey covered an area approximately 205 kilometers (km) in the offshore direction, extending from about 500 m to about 4,000 m water depth, and about 110 km in the alongshore direction, centered on the Hudson Canyon. The sea floor was mapped using a SeaBeam Instruments 2112 multibeam echosounder aboard the National Oceanic and Atmospheric Administration...
**Symbology has been adjusted by the Open Space Institute from The Nature Conservancy's original "Geophysical Settings, 2016 Eastern U.S. and Canada" dataset.** The geophysical settings are defined by their physical properties – geology, soil, and elevation - that correspond to differences in the flora and fauna they support. They also differ in ecological character, in their value for agriculture or mining, and how they have been developed by people. For example, the region’s high granite mountains are both largely intact and topographically complex, whereas low coastal sandplains are both more fragmented and relatively flat. The geophyical settings classification enabled us to compare resilience characteristics...
Categories: Data;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Downloadable,
Map Service;
Tags: Ecoregions,
Elevation,
Geology,
Geophysical Settings,
Resilience,
This digital dataset release of the La Junta, Colorado and Kansas quadrangle is composed of previously published elevation contours, structure contours on the limits of the Morrison, Dakota, and Purgatorie Formations, and geologic formational data. The digitizing of this map is to provide a more accessible dataset to be available for public usage. The original dataset was part of an eight-part series of maps in Colorado and Kansas, this map modified in part by reconnaissance by G.R. Scott in 1968. The entirety of this dataset includes both spatial and non-spatial data held in a singular, GeMS compliant geodatabase. This geodatabase includes a geologic map, geologic map feature class holding contact and fault lines,...
Categories: Data;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Downloadable,
Map Service;
Tags: Big Basin Formation,
Colorado,
Cretaceous,
Dakota Sandstone,
Dockum Group,
These data were created as part of the National Oceanic and Atmospheric Administration Coastal Services Center's efforts to create an online mapping viewer depicting potential sea level rise and its associated impacts on the nation's coastal areas. The purpose of the mapping viewer is to provide coastal managers and scientists with a preliminary look at sea level rise (slr) and coastal flooding impacts. The viewer is a screening-level tool that uses nationally consistent data sets and analyses.Data and maps provided can be used at several scales to help gauge trends and prioritize actions for different scenarios. The Sea Level Rise and Coastal Flooding Impacts Viewer may be accessed at: http://www.csc.noaa.gov/slr...
This dataset represents aspect, the horizontal direction the mountain slope faces, for the Northeast, including Canada. The cool aspect represents the North-facing slope and the warm aspect represents the South-facing slope. This dataset is derived from the following source: 30 meter Digital Elevation Model (DEM) for the Northeast (projected to NAD Albers 83) that was created by mosaicing two datasets: 1. U.S. Geological Survey's (USGS) 30 meter National Elevation Dataset (NED) , ~1 arc-second data that is updated over large areas by integrating the 10 meter or better source data (where available), re-sampled to 1 arc-second. 2. The Canadian Digital Elevation Data, Level 1 (CDED1) The Center of Topographic Information...
Categories: Data;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Downloadable,
Map Service;
Tags: Cool,
Elevation,
Slope,
Terrestrial,
Warm
Elevation distribution in the Edwin B. Forsythe National Wildlife Refuge (EBFNWR), which spans over Great Bay, Little Egg Harbor, and Barnegat Bay in New Jersey, USA is given in terms of mean elevation of conceptual marsh units defined by Defne and Ganju (2016). The elevation data is based on the 1-meter resampled 1/9 arc-second resolution USGS National Elevation Data. As part of the Hurricane Sandy Science Plan, the U.S. Geological Survey is expanding National Assessment of Coastal Change Hazards and forecast products to coastal wetlands. The intent is to provide federal, state, and local managers with tools to estimate their vulnerability and ecosystem service potential. For this purpose, the response and resilience...
Categories: Data;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Downloadable,
Map Service;
Tags: Atlantic Ocean,
Barnegat Bay,
Barnegat bay,
Edwin B. Forsythe National Wildlife Refuge,
Environmental Health,
The Atlantic Beach artificial reef, located on the sea floor 3 nautical miles south of Atlantic Beach, New York in about 20 meters water depth, was built to create habitat for marine life. The reef was originally created by placing heavy materials such as tires, automobile bodies and other vehicles, barges, and rock from a dredging project on the sea floor. In 2000, the U.S. Geological Survey surveyed the area using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard (CCG) ship Frederick G. Creed. The purpose of this multibeam survey, done in cooperation with the U.S. Army Corps of Engineers when the Creed was in the New York region in April 2000, was to map the bathymetry and backscatter intensity...
Categories: Data;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Citation,
Downloadable,
Map Service;
Tags: Atlantic Beach artificial reef,
Esri binary grid,
Middle Atlantic Bight,
New Jersey,
New York,
Surveys of the bathymetry and backscatter intensity of the sea floor of the Historic Area Remediation Site (HARS), offshore of New York and New Jersey, were carried out in 1996, 1998, and 2000 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The objective of the multiple echosounder surveys was to map the bathymetry and surficial sediments over time as dredged material was placed in the HARS to remediate contaminated sediments. Maps derived from the multibeam surveys show sea-floor bathymetry, shaded-relief bathymetry, and backscatter intensity (a measure of sea-floor texture and roughness) at a spatial resolution of 3 meters. The area was mapped by the U.S....
This dataset contains an inventory of landslides in many of the most landslide-prone parts of Minnesota. This project was created to improve our understanding of the landslide hazard in Minnesota and to provide a nearly statewide base map of landslide data. The mapping was performed by geologists from the U.S. Geological Survey, the Freshwater Society, and several academic institutions where undergraduate students, graduate students and faculty performed mapping. Contributing academic institution include the University of Minnesota Duluth, the University of Minnesota Twin Cities, the University of Wisconsin-Superior, Gustavus Adolphus College, Winona State University, Minnesota State University, Mankato, St. Thomas...
Categories: Data;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Downloadable,
Map Service;
Tags: Geomorphology,
Minnesota,
Remote Sensing,
USGS Science Data Catalog (SDC),
Water Quality,
The Sandy Hook artificial reef, located on the sea floor offshore of Sandy Hook, New Jersey was built to create habitat for marine life. The reef was created by the placement of heavy materials on the sea floor; ninety-five percent of the material in the Sandy Hook reef is rock. In 2000, the U.S. Geological Survey surveyed the area using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard (CCG) ship Frederick G. Creed. The purpose of this multibeam survey, done in cooperation with the U.S. Army Corps of Engineers when the Creed was in the New York region in April 2000, was to map the bathymetry and backscatter intensity of the sea floor in the area of the Sandy Hook artificial reef. The collected...
Categories: Data;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Citation,
Downloadable,
Map Service;
Tags: Esri binary grid,
GeoTIFF image,
Middle Atlantic Bight,
New Jersey,
New York,
The Hudson Shelf Valley is the submerged seaward extension of the ancestral Hudson River drainage system and is the largest physiographic feature on the Middle Atlantic continental shelf. The valley begins offshore of New York and New Jersey at about 30-meter (m) water depth, runs southerly and then southeasterly across the Continental Shelf, and terminates on the outer shelf at about 85-m water depth landward of the head of the Hudson Canyon. Portions of the 150-kilometer-long valley were surveyed in 1996, 1998, and 2000 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to map the bathymetry and backscatter...
These data were created as part of the National Oceanic and Atmospheric Administration Coastal Services Center's efforts to create an online mapping viewer depicting potential sea level rise and its associated impacts on the nation's coastal areas. The purpose of the mapping viewer is to provide coastal managers and scientists with a preliminary look at sea level rise (slr) and coastal flooding impacts. The viewer is a screening-level tool that uses nationally consistent data sets and analyses.Data and maps provided can be used at several scales to help gauge trends and prioritize actions for different scenarios. The Sea Level Rise and Coastal Flooding Impacts Viewer may be accessed at: http://www.csc.noaa.gov/slr...
This data release includes 2022 data for the Louisiana Outer Coast Restoration Project for North Breton Island. Specifically, this data release includes a detailed habitat map, general habitat map, georeferenced imagery, and a bare-earth digital elevation model (DEM) developed from light detection and ranging data. These habitat maps are developed using the methods and classification scheme from Louisiana Coastal Protection and Restoration Authority’s (CPRA) Barrier Island Comprehensive Monitoring (BICM) program. For more details on BICM habitat classes, see the Entity and Attribute Information section of the metadata. Please consult the accompanying readME.txt file for information and recommendations on the contents...
Categories: Data;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Downloadable,
Map Service;
Tags: Ecology,
Geography,
Gulf of Mexico,
Louisiana,
Plaquemines,
The GeoTiff raster data were created from subtraction of elevation values collected in 2012 from elevation values collected in 2011. Both data collections were conducted by airborne lidar surveys contracted by the Minnesota Department of Natural Resources. These survey occured before and after a historical rain event that cause widespread landscape change. The shapefiles are polygon objects that illustrate where erosion and deposition occurred on slopes and in valleys in the June 2012 rain event in the Duluth, MN region
Categories: Data;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Downloadable,
Map Service;
Tags: Duluth,
Geomorphology,
Remote Sensing,
USGS Science Data Catalog (SDC),
elevation
|
|