Skip to main content
Advanced Search

Filters: Tags: ground water (X) > Types: OGC WFS Layer (X)

7 results (12ms)   

View Results as: JSON ATOM CSV
thumbnail
Raw data were collected in Shenandoah National Park during summer 2012. Air and temperature data were collected using temperature loggers at several stations throughout the park. These data were used in the publication of the manuscript "Accounting for groundwater influence on headwater stream thermal sensitivity to climate change" through the journal Ecological Applications. Water temperature data were collected at all 78 reach locations during the summer of 2012 (23 June–7 September). Temperature was measured every hour with a logger.
thumbnail
A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric surface map for 2016 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...
thumbnail
A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric surface map for 2016 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...
A dataset of well information and geospatial data was developed for 426 U.S. Geological Survey (USGS) observation wells in Connecticut, Maine, Massachusetts, New Hampshire, Rhode Island, and Vermont. An extensive list of attributes is included about each well, its location, and water-level history to provide the public and water-resources community with comprehensive information on the USGS well network in New England and data available from these sites. These data may be useful for evaluating groundwater conditions and variability across the region. The well list and site attributes, which were extracted from USGS National Water Information System (NWIS), represent all of the active wells in the New England network...
thumbnail
A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric surface map for 2016 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...
thumbnail
A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric surface map for 2016 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...
thumbnail
A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric surface map for 2016 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...


    map background search result map search result map 2012 Air and Temperature Data from Shenandoah National Park Data associated with potentiometric surface, Mississippi River Valley alluvial aquifer, spring 2016 (a) Groundwater altitude data, from monitoring-networks wells, considered for the potentiometric surface map, Mississippi River Valley alluvial aquifer, spring 2016 (b) Groundwater altitude data, from driller-measured wells, considered for the potentiometric surface, Mississippi River Valley alluvial aquifer, spring 2016 (c) Surface-water altitude data, from streamgages, considered for the potentiometric surface map, Mississippi River Valley alluvial aquifer, spring 2016 (d) Spatial data set of the potentiometric surface contours, Mississippi River Valley alluvial aquifer, spring 2016, in feet Geospatial Dataset of Wells and Attributes in the New England Groundwater Level Network, 2017 (ver. 1.1, December 2019) 2012 Air and Temperature Data from Shenandoah National Park (b) Groundwater altitude data, from driller-measured wells, considered for the potentiometric surface, Mississippi River Valley alluvial aquifer, spring 2016 Data associated with potentiometric surface, Mississippi River Valley alluvial aquifer, spring 2016 (a) Groundwater altitude data, from monitoring-networks wells, considered for the potentiometric surface map, Mississippi River Valley alluvial aquifer, spring 2016 (c) Surface-water altitude data, from streamgages, considered for the potentiometric surface map, Mississippi River Valley alluvial aquifer, spring 2016 (d) Spatial data set of the potentiometric surface contours, Mississippi River Valley alluvial aquifer, spring 2016, in feet Geospatial Dataset of Wells and Attributes in the New England Groundwater Level Network, 2017 (ver. 1.1, December 2019)