Skip to main content
Advanced Search

Filters: Tags: hydraulic model (X) > Types: OGC WMS Layer (X)

5 results (8ms)   

View Results as: JSON ATOM CSV
thumbnail
Background / Problem – The City of Ithaca, Tompkins County, N.Y., is in the process of developing a flood management plan for the streams that flow through the City. Flooding in the City is caused by a variety of distinct and sometimes interconnected reasons. Flooding often is a result of snowmelt and rain during the winter and spring. Slow ice-melt and breakup can lead to ice jams and subsequent flooding. Flash floods are produced by summer thunderstorms. All of these flood types are compounded by two factors: the storm-sewer system in the City and the elevation of Cayuga Lake. The storm sewers drain to the nearby streams at points below the tops of the streambanks. Because the streamward ends of the storm sewers...
thumbnail
The development and the generation of the datasets that are published through this data release, were based on the results and findings of this report: Kohn, M.S. and Patton, T.T., 2018, Flood-Inundation Maps for the South Platte River at Fort Morgan, Colorado, 2018: U.S. Geological Survey Scientific Investigations Report 2018-5114, 14 p., https://doi.org/10.3133/sir20185114. The geospatial dataset contain final versions of the raster and vector geospatial data and its related metadata. The geospatial data include inundation extents, corresponding inundation depths, and the study area boundaries. Digital flood-inundation maps for a 4.5-mile reach of the South Platte River at Fort Morgan, Colorado from Morgan County...
thumbnail
In support of a preliminary analysis performed by New York State Department of Environmental Conservation (NYSDEC) that found elevated nutrient levels along selected reaches of the Mohawk River, one-dimensional, unsteady, hydraulic and water-quality models using HEC-RAS and HEC-RAS Nutrient Simulation Module I (version 5.0.3) were developed by the U.S. Geological Survey (USGS) for the 127-mile reach of the Mohawk River between Rome and Cohoes, New York. The models were designed to accurately simulate within-channel flow conditions for this highly regulated, control structure dense river reach. The models were calibrated for the study period of May through September 2016 using best available streamflow, temperature,...
thumbnail
The development and the generation of the datasets that are published through this data release, were based on the results and findings of this report: Kohn, M.S. and Patton, T.T., 2018, Flood-Inundation Maps for the South Platte River at Fort Morgan, Colorado, 2018: U.S. Geological Survey Scientific Investigations Report 2018-5114, 14 p., https://doi.org/10.3133/sir20185114. The model archive dataset contains all relevant files to document and re-run the surface-water hydraulic model that are discussed in the report. The model archive contains two model runs, the calibration model run and the flood inundation model run. Digital flood-inundation maps for a 4.5-mile reach of the South Platte River at Fort Morgan,...
thumbnail
The development and the generation of the datasets that are published through this data release, were based on the results and findings of this report: Kohn, M.S. and Patton, T.T., 2018, Flood-Inundation Maps for the South Platte River at Fort Morgan, Colorado, 2018: U.S. Geological Survey Scientific Investigations Report 2018-5114, 14 p., https://doi.org/10.3133/sir20185114. The geospatial dataset contain final versions of the raster and vector geospatial data and its related metadata, and the model archive dataset contains all relevant files to document and re-run the surface-water hydraulic model that are discussed in the report. Digital flood-inundation maps for a 4.5-mile reach of the South Platte River at...


    map background search result map search result map Water-Surface Profiles and Discharges for Four Stream Reaches, Ithaca,  Tompkins County N.Y. Geospatial Data and Surface-Water Model Archive for a Flood-Inundation Mapping Study of the South Platte River at Fort Morgan, Colorado, 2018 Geospatial Data for a Flood-Inundation Mapping Study of the South Platte River at Fort Morgan, Colorado, 2018 Surface-Water Model Archive for a Flood-Inundation Mapping Study of the South Platte River at Fort Morgan, Colorado, 2018 HEC-RAS hydraulic, temperature, and nutrient models for the Mohawk River between Rome and Cohoes, New York Water-Surface Profiles and Discharges for Four Stream Reaches, Ithaca,  Tompkins County N.Y. HEC-RAS hydraulic, temperature, and nutrient models for the Mohawk River between Rome and Cohoes, New York