GeoTIFF image of the backscatter intensity of the sea floor offshore of Shinnecock Inlet, New York, in 1998 (3-m resolution, Mercator, WGS 84)

Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University...

Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: 3-m resolution, Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), GeoTIFF image, All tags... Long Island, Middle Atlantic Bight, New York, New York Bight, North Atlantic Ocean, Shinnecock Inlet, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), backscatter intensity, geoscientificInformation, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor, sea floor mapping, Fewer tags

GeoTIFF image of shaded-relief bathymetry, colored by backscatter intensity, of the sea floor of the Hudson Shelf Valley (12-m resolution, Mercator, WGS 84)

The Hudson Shelf Valley is the submerged seaward extension of the ancestral Hudson River drainage system and is the largest physiographic feature on the Middle Atlantic continental shelf. The valley begins offshore of New York and New Jersey at about 30-meter (m) water depth, runs southerly and then southeasterly across the Continental Shelf, and terminates on the outer shelf at about 85-m water depth landward of the head of the Hudson Canyon. Portions of the 150-kilometer-long valley were surveyed in 1996, 1998, and 2000 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to map the bathymetry and backscatter...

Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: Canadian Coast Guard ship Frederick G. Creed, Canadian Hydrographic Service (CHS), Coastal and Marine Geology Program (CMGP), GeoTIFF image, Hudson Canyon, All tags... Hudson Shelf Valley, Middle Atlantic Bight, New Jersey, New York, New York Bight, North Atlantic Ocean, Simrad EM1000, U.S. Geological Survey (USGS), USGS Open-File Report 03-372, University of New Brunswick (UNB), WHCMSC field activity 1996-043-FA, WHCMSC field activity 1998-015-FA, WHCMSC field activity 2000-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), backscatter intensity, geoscientificInformation, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor mapping, shaded-relief bathymetry, Fewer tags

GeoTIFF image of the backscatter intensity of the sea floor of the Sandy Hook artificial reef (2-m resolution, Mercator, WGS 84)

The Sandy Hook artificial reef, located on the sea floor offshore of Sandy Hook, New Jersey was built to create habitat for marine life. The reef was created by the placement of heavy materials on the sea floor; ninety-five percent of the material in the Sandy Hook reef is rock. In 2000, the U.S. Geological Survey surveyed the area using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard (CCG) ship Frederick G. Creed. The purpose of this multibeam survey, done in cooperation with the U.S. Army Corps of Engineers when the Creed was in the New York region in April 2000, was to map the bathymetry and backscatter intensity of the sea floor in the area of the Sandy Hook artificial reef. The collected...

Categories: Data; Types: ArcGIS REST Map Service, ArcGIS Service Definition, Citation, Downloadable, Map Service; Tags: GeoTIFF image, Middle Atlantic Bight, New Jersey, New York, New York Bight, All tags... North Atlantic Ocean, Sandy Hook artificial reef, Simrad EM1000, backscatter intensity, geoscientificInformation, image mosaics, imageryBaseMapsEarthCover, marine geology, marine geophysics, mid-Atlantic Bight, multibeam, multibeam sonar, oceans, sea floor mapping, sea-floor acoustic reflectivity, sea-floor characteristics, Fewer tags

Tracklines of a multibeam survey of the sea floor of the Sandy Hook artificial reef (polyline shapefile, geographic, WGS 84)

The Sandy Hook artificial reef, located on the sea floor offshore of Sandy Hook, New Jersey was built to create habitat for marine life. The reef was created by the placement of heavy materials on the sea floor; ninety-five percent of the material in the Sandy Hook reef is rock. In 2000, the U.S. Geological Survey surveyed the area using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard (CCG) ship Frederick G. Creed. The purpose of this multibeam survey, done in cooperation with the U.S. Army Corps of Engineers when the Creed was in the New York region in April 2000, was to map the bathymetry and backscatter intensity of the sea floor in the area of the Sandy Hook artificial reef. The collected...

Categories: Data; Types: Citation; Tags: Middle Atlantic Bight, New Jersey, New York, New York Bight, North Atlantic Ocean, All tags... Sandy Hook artificial reef, Simrad EM1000, location, marine geology, marine geophysics, mid-Atlantic Bight, multibeam, navigational data, oceans, polyline shapefile, sea floor mapping, tracklines, Fewer tags

GeoTIFF image of shaded-relief bathymetry, colored by backscatter intensity, of the sea floor offshore of Moriches Inlet, New York, in 1998 (3-m resolution, Mercator, WGS 84)

Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University...

Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: 3-m resolution, Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), GeoTIFF image, All tags... Long Island, Middle Atlantic Bight, Moriches Inlet, New York, New York Bight, North Atlantic Ocean, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), backscatter intensity, geoscientificInformation, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor, sea floor mapping, shaded-relief bathymetry, Fewer tags

Grid of the sea-floor bathymetry offshore of Shinnecock Inlet, New York, in 1998 (3-m resolution Esri binary grid, Mercator, WGS 84)

Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University...

Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: 3-m grid, Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), Esri binary grid, All tags... Long Island, Middle Atlantic Bight, New York, New York Bight, North Atlantic Ocean, Shinnecock Inlet, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), bathymetry, elevation, geoscientificInformation, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor, sea floor mapping, Fewer tags

GeoTIFF image the shaded-relief bathymetry, pseudocolored by backscatter intensity, of the sea floor of the Atlantic Beach artificial reef (2-m resolution, Mercator, WGS 84)

The Atlantic Beach artificial reef, located on the sea floor 3 nautical miles south of Atlantic Beach, New York in about 20 meters water depth, was built to create habitat for marine life. The reef was originally created by placing heavy materials such as tires, automobile bodies and other vehicles, barges, and rock from a dredging project on the sea floor. In 2000, the U.S. Geological Survey surveyed the area using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard (CCG) ship Frederick G. Creed. The purpose of this multibeam survey, done in cooperation with the U.S. Army Corps of Engineers when the Creed was in the New York region in April 2000, was to map the bathymetry and backscatter intensity...

Types: Citation; Tags: Atlantic Beach artificial reef, GeoTIFF image, Middle Atlantic Bight, New Jersey, New York, All tags... New York Bight, North Atlantic Ocean, backscatter intensity, bathymetry, geoscientificInformation, imageryBaseMapsEarthCover, marine geophysics, mid-Atlantic Bight, multibeam, multibeam sonar, oceans, sea floor mapping, sea-floor acoustic reflectivity, sea-floor characteristics, shaded-relief bathymetry, Fewer tags

Bathymetry and backscatter intensity of the sea floor of the Sandy Hook artificial reef, offshore of New Jersey

The Sandy Hook artificial reef, located on the sea floor offshore of Sandy Hook, New Jersey was built to create habitat for marine life. The reef was created by the placement of heavy materials on the sea floor; ninety-five percent of the material in the Sandy Hook reef is rock. In 2000, the U.S. Geological Survey surveyed the area using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard (CCG) ship Frederick G. Creed. The purpose of this multibeam survey, done in cooperation with the U.S. Army Corps of Engineers when the Creed was in the New York region in April 2000, was to map the bathymetry and backscatter intensity of the sea floor in the area of the Sandy Hook artificial reef. The collected...

Categories: Data; Tags: Geomorphology, Mid-Atlantic Bight, Middle Atlantic Bight, New Jersey, New York, All tags... New York Bight, North Atlantic Ocean, Sandy Hook artificial reef, backscatter intensity, bathymetry, image mosaics, marine geology, marine geophysics, multibeam sonar, navigational data, sea-floor acoustic reflectivity, sea-floor characteristics, Fewer tags

Sediment Texture and Geomorphology of the Sea Floor from Fenwick Island, Maryland to Fisherman's Island, Virginia

These data are a qualitatively derived interpretive polygon shapefile defining surficial sediment type and distribution, and geomorphology, for nearly 1,400 square kilometers of sea floor on the inner-continental shelf from Fenwick Island, Maryland to Fisherman’s Island, Virginia, USA. These data are classified according to Barnhardt and others (1998) bottom-type classification system, which was modified to highlight changes in secondary sediment-types such as mud and gravel across this primarily sandy shelf. Most of the geophysical and sample data used to create this interpretive layer were collected as part of the Linking Coastal Processes and Vulnerability: Assateague Island Regional Study project (GS2-2C), supported...

Categories: Data; Types: Downloadable, Map Service, OGC WFS Layer, OGC WMS Layer, Shapefile; Tags: Assateague Island, Assateague Island National Seashore, Assawoman Island, Atlantic Ocean, Backscatter, All tags... Bathymetry, Bottom Photographs, Bottom Type, Cape Henlopen, Cedar Island, Chincoteague Inlet, Chincoteague Island, Chincoteague National Wildlife Refuge, Cobb Island, Delaware, Delmarva Peninsula, Delmarva Peninsula, Fenwick Island, Fisherman's Island, Hog Island, Interpretation, Marine Geology, Maryland, Metompkin Island, Mid-Atlantic Bight, Mink Island, Mockhorn Island, Myrtle Island, Ocean City, Parramore Island, Rehoboth, Sea floor, Sediment Cover, Sediment Distribution, Sediment Samples, Sediment Texture, Ship Shoal Island, Sidescan Sonar, Slope, Smith Island, Virginia, Wallops Island, Wreck Island, carbonate, geomorphology, interpretation, marine geology, marine geophysics, sea-floor characteristics, sediment texture, Fewer tags

Tracklines of a multibeam survey of the sea floor southwest of Montauk Point, New York, in 1998 (polyline shapefile, geographic, WGS 84)

Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University...

Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), EM 1000, Long Island, All tags... Middle Atlantic Bight, Montauk Point, New Jersey, New York, New York Bight, North Atlantic Ocean, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), location, mid-Atlantic Bight, multibeam, navigation, oceans, polyline shapefile, sea floor, sea floor mapping, tracklines, Fewer tags

GeoTIFF image of shaded-relief bathymetry of the sea floor offshore of Fire Island Inlet, New York, in 1998 (3-m resolution, Mercator, WGS 84)

Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University...

Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: 3-m resolution image, Fire Island, GeoTIFF image, Long Island, Middle Atlantic Bight, All tags... New York, New York Bight, North Atlantic Ocean, Simrad EM1000, WHCMSC field activity 1998-015-FA, geoscientificInformation, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor, sea floor mapping, shaded-relief bathymetry, Fewer tags

Grid of the sea-floor bathymetry offshore of Fire Island Inlet, New York, in 1998 (3-m resolution Esri binary grid, Mercator, WGS 84)

Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University...

Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: 3-m grid, Esri binary grid, Fire Island, Long Island, Middle Atlantic Bight, All tags... New York, New York Bight, North Atlantic Ocean, Simrad EM1000, WHCMSC field activity 1998-015-FA, bathymetry, elevation, geoscientificInformation, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor mapping, Fewer tags

GeoTIFF image of the backscatter intensity of the sea floor of the Atlantic Beach artificial reef (2-m resolution, Mercator, WGS 84)

The Atlantic Beach artificial reef, located on the sea floor 3 nautical miles south of Atlantic Beach, New York in about 20 meters water depth, was built to create habitat for marine life. The reef was originally created by placing heavy materials such as tires, automobile bodies and other vehicles, barges, and rock from a dredging project on the sea floor. In 2000, the U.S. Geological Survey surveyed the area using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard (CCG) ship Frederick G. Creed. The purpose of this multibeam survey, done in cooperation with the U.S. Army Corps of Engineers when the Creed was in the New York region in April 2000, was to map the bathymetry and backscatter intensity...

Categories: Data; Types: ArcGIS REST Map Service, ArcGIS Service Definition, Citation, Downloadable, Map Service; Tags: Atlantic Beach artificial reef, GeoTIFF image, Middle Atlantic Bight, New Jersey, New York, All tags... New York Bight, North Atlantic Ocean, backscatter intensity, geoscientificInformation, image mosaics, imageryBaseMapsEarthCover, marine geophysics, mid-Atlantic Bight, multibeam, multibeam sonar, oceans, sea floor mapping, sea-floor acoustic reflectivity, sea-floor characteristics, Fewer tags

GeoTIFF image of shaded-relief bathymetry, colored by backscatter intensity, of the sea floor southwest of Montauk Point, New York, in 1998 (3-m resolution, Mercator, WGS 84)

Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University...

Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: 3-m resolution image, Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), GeoTIFF image, All tags... Long Island, Middle Atlantic Bight, Montauk Point, New York, New York Bight, North Atlantic Ocean, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), backscatter intensity, geoscientificInformation, image, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor, sea floor mapping, shaded-relief bathymetry, Fewer tags

Offshore of Moriches Inlet, New York

These data are from a 1998 multibeam survey of the sea floor offshore of Moriches Inlet, New York. There are five datasets: bathymetry grid, shaded-relief image, backscatter intensity image, shaded-relief colored by backscatter intensity image, and trackline navigation. The bathymetry shows the shape of the sea floor. Of particular interest are the size, shape, and orientation of bed forms that may indicate sediment movement. The shaded-relief image provides a visualization of the bathymetry that accentuates small features that cannot be effectively shown as contours alone. The image of backscatter intensity provides qualitative information on the sediment texture and roughness of the sea floor. The image of shaded-relief...

Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: Long Island, Middle Atlantic Bight, Montauk Point, New York, New York Bight, All tags... North Atlantic Ocean, backscatter, backscatter intensity, bathymetry, elevation, geoscientificInformation, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor, sea floor mapping, shaded-relief bathymetry, tracklines, Fewer tags

Bathymetry of the Atlantic Beach artificial reef (2-m resolution Esri binary grid and 32-bit GeoTIFF, Mercator, WGS 84)

The Atlantic Beach artificial reef, located on the sea floor 3 nautical miles south of Atlantic Beach, New York in about 20 meters water depth, was built to create habitat for marine life. The reef was originally created by placing heavy materials such as tires, automobile bodies and other vehicles, barges, and rock from a dredging project on the sea floor. In 2000, the U.S. Geological Survey surveyed the area using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard (CCG) ship Frederick G. Creed. The purpose of this multibeam survey, done in cooperation with the U.S. Army Corps of Engineers when the Creed was in the New York region in April 2000, was to map the bathymetry and backscatter intensity...

Categories: Data; Types: ArcGIS REST Map Service, ArcGIS Service Definition, Citation, Downloadable, Map Service; Tags: Atlantic Beach artificial reef, Esri binary grid, Middle Atlantic Bight, New Jersey, New York, All tags... New York Bight, North Atlantic Ocean, Simrad EM1000, bathymetry, bathymetry, elevation, geoscientificInformation, imageryBaseMapsEarthCover, marine geophysics, mid-Atlantic Bight, multibeam, multibeam sonar, oceans, sea floor mapping, sea-floor characteristics, Fewer tags

Offshore of Fire Island Inlet, New York

These data are from a 1998 multibeam survey of the sea floor offshore of Fire Island Inlet, New York. There are five datasets: bathymetry grid, shaded-relief image, backscatter intensity image, shaded-relief colored by backscatter intensity image, and trackline navigation. The bathymetry shows the shape of the sea floor. Of particular interest are the size, shape, and orientation of bed forms that may indicate sediment movement. The shaded-relief image provides a visualization of the bathymetry that accentuates small features that cannot be effectively shown as contours alone. The image of backscatter intensity provides qualitative information on the sediment texture and roughness of the sea floor. The image of...

Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: Fire Island, Long Island, Middle Atlantic Bight, New York, New York Bight, All tags... North Atlantic Ocean, backscatter, backscatter intensity, bathymetry, elevation, geoscientificInformation, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor mapping, shaded-relief bathymetry, tracklines, Fewer tags

GeoTIFF image of the shaded-relief bathymetry of the sea floor of the Sandy Hook artificial reef (2-m resolution, Mercator, WGS 84)

The Sandy Hook artificial reef, located on the sea floor offshore of Sandy Hook, New Jersey was built to create habitat for marine life. The reef was created by the placement of heavy materials on the sea floor; ninety-five percent of the material in the Sandy Hook reef is rock. In 2000, the U.S. Geological Survey surveyed the area using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard (CCG) ship Frederick G. Creed. The purpose of this multibeam survey, done in cooperation with the U.S. Army Corps of Engineers when the Creed was in the New York region in April 2000, was to map the bathymetry and backscatter intensity of the sea floor in the area of the Sandy Hook artificial reef. The collected...

Categories: Data; Types: Citation; Tags: GeoTIFF image, Middle Atlantic Bight, New Jersey, New York, New York Bight, All tags... North Atlantic Ocean, Sandy Hook artificial reef, Simrad EM1000, bathymetry, geoscientificInformation, imageryBaseMapsEarthCover, marine geology, marine geophysics, mid-Atlantic Bight, multibeam, multibeam sonar, oceans, sea floor mapping, sea-floor characteristics, shaded-relief bathymetry, Fewer tags

Grid of the sea-floor bathymetry southwest of Montauk Point, New York, in 1998 (3-m resolution Esri binary grid, Mercator, WGS 84)

Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University...

Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: 3-m grid, Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), Esri binary grid, All tags... Long Island, Middle Atlantic Bight, Montauk Point, New York, New York Bight, North Atlantic Ocean, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), bathymetry, elevation, geoscientificInformation, grid, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor, sea floor mapping, Fewer tags

Tracklines of a multibeam survey of the sea floor of the Atlantic Beach artificial reef (polyline shapefile, geographic, WGS 84)

The Atlantic Beach artificial reef, located on the sea floor 3 nautical miles south of Atlantic Beach, New York in about 20 meters water depth, was built to create habitat for marine life. The reef was originally created by placing heavy materials such as tires, automobile bodies and other vehicles, barges, and rock from a dredging project on the sea floor. In 2000, the U.S. Geological Survey surveyed the area using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard (CCG) ship Frederick G. Creed. The purpose of this multibeam survey, done in cooperation with the U.S. Army Corps of Engineers when the Creed was in the New York region in April 2000, was to map the bathymetry and backscatter intensity...

Types: Citation; Tags: Atlantic Beach artificial reef, Middle Atlantic Bight, New Jersey, New York, New York Bight, All tags... North Atlantic Ocean, location, marine geophysics, mid-Atlantic Bight, multibeam, navigational data, oceans, polyline shapefile, sea floor mapping, tracklines, Fewer tags