Skip to main content
Advanced Search

Filters: Tags: modflow6 (X)

9 results (57ms)   

View Results as: JSON ATOM CSV
thumbnail
The U.S. Geological Survey (USGS), in cooperation with the Harris-Galveston Subsidence District and Fort Bend Subsidence District, constructed a finite-difference numerical groundwater-flow model of the northern Gulf Coast aquifer region for 1897 through 2018 using MODFLOW 6 with the Newton formulation solver to simulate groundwater flow and land-surface subsidence. Model parameter estimation and uncertainty analysis were conducted with PEST++ Iterative Ensemble Smoother software. The simulated results are described in the associated U.S. Geological Survey Professional Paper 1877. The model archive provided in this U.S. Geological Survey data release includes all the necessary files to run the MODFLOW 6 model and...
thumbnail
This groundwater model archive documents a transient, regional-scale numerical model of the Long Island aquifer system that simulates hydrologic conditions for the period 1900-2019 using U.S. Geological Survey’s groundwater modeling software MODFLOW 6 (Hughes and others, 2017). The development and calibration of the numerical model is documented in Walter and others (2024). The model input and output files included in this data release are documented in the readme.txt. The model simulates historical water levels, stream flows, and the position of the saltwater interface in response to time-varying changes in pumping and recharge stresses for the period 1900-2019. This archive also contains input and output files...
thumbnail
This model archive contains the model files for the MERAS 3 and Mississippi Delta groundwater flow models documented in the U.S. Geological Survey Scientific Investigations Report 2023-5100. The MERAS 3 model provides a simplified representation of groundwater flow in the Mississippi Embayment Regional Aquifer Study (MERAS) area for the period of 1900 through 2018, with the primary goal of providing boundary fluxes for inset models focused on local areas of interest. The Mississippi Delta model simulates groundwater flow in the Delta region of northwestern Mississippi from 1900 through 2018, using boundary fluxes from the MERAS 3 model. A scenario version of the Mississippi Delta model extends the simulation to...
thumbnail
This data release contains the input, output, and model code used to run a transient simulation of a previously published (Walter and others, 2020) steady-state regional model of Long Island, N.Y. The original model code was updated to MODFLOW 6 (version 6.3.0) and incorporates monthly transient stress periods to simulate conditions from 2005-2019 following methods described in Walter and others (2020). Selected remedial stresses (groundwater extraction and return) were incorporated for select locations in southeastern Nassau County. No modifications were made to the hydrologic boundaries, model layers, or hydraulic properties specified in the original model. A uniform value of 0.25 was used to represent specific...
thumbnail
A proof-of-concept MODFLOW 6 groundwater model was developed to represent the bedrock, delta, and alluvially-deposited aquifers underlying the Mekong River Basin approximately between Phnom Penh, Cambodia and Cao Lanh, Vietnam. The model was constructed using square grid cells measuring 2,200 meters on each side. The proof-of-concept groundwater model was used to simulate environmental baseline conditions, representative of a 20-year period with stresses from November 1990 through October 2010. Additionally, a 20-year period of drier conditions with sea-level rise was also simulated that approximates the Mekong River Commission C3 climate scenario (drier climate with sea level rise; Mekong River Commission, 2019)....
thumbnail
A three-dimensional groundwater flow model using MODFLOW 6 (version 6.2.2) was developed and calibrated for unconsolidated Coastal Plain aquifers underlying the Joint Base McGuire-Dix-Lakehurst (JBMDL) and vicinity, New Jersey, to evaluate groundwater flow pathways of per- and polyfluoroalkyl substances (PFAS) contamination associated with use of aqueous film forming foam (AFFF). The model was developed and calibrated by the U.S. Geological Survey (USGS) in cooperation with the U.S. Air Force Civil Engineer Center (AFCEC) based on the previously developed hydrogeologic framework (https://doi.org/10.3133/ofr20191134). Steady-state flow in the unconsolidated aquifers was simulated using the MODFLOW 6 which accounts...
thumbnail
Des Moines Water Works (DMWW) is a regional municipal water utility that supplies residential and commercial water resources to about 600,000 customers in Des Moines, Iowa, and surrounding municipalities in central Iowa. DMWW has identified a need for increased water supply and is exploring the potential for expanding groundwater production capabilities in the Des Moines River alluvial aquifer, where it operates two radial collector wells (RCWs). The U.S. Geological Survey, in cooperation with DMWW, completed a study of the Des Moines River alluvial aquifer and the interactions of the RCWs with the aquifer; no previously published model has included the existing well locations, which is the focus of this model....
thumbnail
This model archive contains model files and a complete repeatable workflow for source water delineation for groundwater supply wells in the Neversink/Rondout Basins of New York. The U.S. Geological Survey, in cooperation with the NYSDEC and NYSDOH, began an investigation in 2019 with the general objectives of (1) improving understanding of the regional groundwater flow system (2) delineating areas contributing recharge to eight priority production wells, and (3) quantifying the uncertainty of these contributing areas in a probabilistic way that can be used to inform decision-making related to priority well source water protection. To accomplish these objectives, a MODFLOW 6 groundwater model (version 6.2.1) was...
thumbnail
This model archive contains files for a set of groundwater flow, particle tracking, and management optimization models that simulate the area around the Navy-Northrop-Grumman contamination plume on Long Island, New York. These models were developed as in insets from the Long Island Regional “parent” Model, from which perimeter boundary conditions were inherited. In addition to input and output files for these models, this archive contains the modeling workflow python code and source data used to build the model. These materials have been included for repeatability and decision transparency.


    map background search result map search result map Groundwater Model Archive and Workflow for Neversink/Rondout Basin, New York, Source Water Delineation MODFLOW 6 and MODPATH7 used to simulate regional groundwater flow and advective transport of per- and polyfluoroalkyl substances, Joint Base McGuire-Dix-Lakehurst and vicinity, New Jersey, 2018 MODFLOW 6 proof-of-concept groundwater model for the Mekong River Basin between Phnom Penh, Cambodia and Cao Lanh, Vietnam MODFLOW 6 models for simulating groundwater flow in the Mississippi Embayment with a focus on the Mississippi Delta MODFLOW 6 models for simulating groundwater flow and a proposed remediation system in the sole-source aquifer system in southeastern Nassau County, New York MODFLOW 6 model and ensemble used in the simulation of groundwater flow and land subsidence in the northern part of the Gulf Coast aquifer, 1897-2018 (ver. 2.0, September 2023) MODFLOW 6 Model Scenario used to Simulate Transient Stresses, Heads, and Flows in the Regional Aquifer System of Long Island, New York, 2005-2019 MODFLOW 6 Groundwater Flow Model for the Des Moines River Alluvial Aquifer near Des Moines, Iowa MODFLOW 6 Model Used to Simulate Groundwater Flow in the Long Island, New York Regional Aquifer System for 1900–2019 Pumping and Recharge Conditions MODFLOW 6 models for simulating groundwater flow and a proposed remediation system in the sole-source aquifer system in southeastern Nassau County, New York MODFLOW 6 Groundwater Flow Model for the Des Moines River Alluvial Aquifer near Des Moines, Iowa Groundwater Model Archive and Workflow for Neversink/Rondout Basin, New York, Source Water Delineation MODFLOW 6 and MODPATH7 used to simulate regional groundwater flow and advective transport of per- and polyfluoroalkyl substances, Joint Base McGuire-Dix-Lakehurst and vicinity, New Jersey, 2018 MODFLOW 6 Model Used to Simulate Groundwater Flow in the Long Island, New York Regional Aquifer System for 1900–2019 Pumping and Recharge Conditions MODFLOW 6 Model Scenario used to Simulate Transient Stresses, Heads, and Flows in the Regional Aquifer System of Long Island, New York, 2005-2019 MODFLOW 6 proof-of-concept groundwater model for the Mekong River Basin between Phnom Penh, Cambodia and Cao Lanh, Vietnam MODFLOW 6 model and ensemble used in the simulation of groundwater flow and land subsidence in the northern part of the Gulf Coast aquifer, 1897-2018 (ver. 2.0, September 2023) MODFLOW 6 models for simulating groundwater flow in the Mississippi Embayment with a focus on the Mississippi Delta