Filters: Tags: navigation (X) > Types: OGC WMS Service (X)

Filters Date Range Past year (0) Past month (0) Past week (0) Past day (0) Custom range... To   Search Types Citation (5) Map Service (5) OGC WFS Layer (5) OGC WMS Layer (5) Contacts U.S. Geological Survey U.S. Geological Survey - ScienceBase Bradford Butman William W Danforth William C Schwab More... Tag Types Theme (5) Place (5) Tag Schemes none (4) None (1) ISO 19115 Topic Category (5) View Results as: JSON ATOM CSV

Tracklines of a multibeam survey of the sea floor southwest of Montauk Point, New York, in 1998 (polyline shapefile, geographic, WGS 84) Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University... Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), EM 1000, Long Island, All tags... Middle Atlantic Bight, Montauk Point, New Jersey, New York, New York Bight, North Atlantic Ocean, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), location, mid-Atlantic Bight, multibeam, navigation, oceans, polyline shapefile, sea floor, sea floor mapping, tracklines, Fewer tags Tracklines of a multibeam survey of the sea floor offshore of Shinnecock Inlet, New York, in 1998 (polyline shapefile, geographic, WGS 84) Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University... Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), Long Island, Middle Atlantic Bight, All tags... New York, New York Bight, North Atlantic Ocean, Shinnecock Inlet, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), location, mid-Atlantic Bight, multibeam, navigation, oceans, polyline shapefile, sea floor, sea floor mapping, tracklines, Fewer tags Tables of file names, times, and locations of images collected during unmanned aerial systems (UAS) flights over Coast Guard Beach, Nauset Spit, Nauset Inlet, and Nauset Marsh, Cape Cod National Seashore, Eastham, Massachusetts on 1 March 2016 (text files) These text files contain tables of the file names, times, and locations of images obtained from an unmanned aerial systems (UAS) flown in the Cape Cod National Seashore. The objective of the fieldwork was to evaluate the quality and cost of mapping from UAS images. Low-altitude (approximately 120 meters above ground level) digital images were obtained from cameras in a fixed-wing unmanned aerial vehicle (UAV) flown from the lawn adjacent to the Coast Guard Beach parking lot on 1 March, 2016. The UAV was a Skywalker X8 flying wing operated by Raptor Maps, Inc., contractors to the U.S. Geological Survey. U.S. Geological Survey technicians deployed and mapped 28 targets that appear in some of the images for use as... Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: Atlantic Ocean, CMGP, Cape Cod, Cape Cod National Seashore, Coast Guard Beach, All tags... Coastal and Marine Geology Program, Eastham, Massachusetts, Nauset Inlet, Nauset Marsh, Orleans, U.S. Geological Survey, UAS, USGS, WHCMSC, Woods Hole Coastal and Marine Science Center, drone, field activity number 2016-007-FA, location, navigation, oceans, unmanned aerial system, Fewer tags Tracklines of a multibeam survey of the sea floor offshore of Moriches Inlet, New York, in 1998 (polyline shapefile, geographic, WGS 84) Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University... Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), Long Island, Middle Atlantic Bight, All tags... Moriches Inlet, New York, New York Bight, North Atlantic Ocean, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), location, mid-Atlantic Bight, multibeam, navigation, oceans, polyline shapefile, sea floor, sea floor mapping, tracklines, Fewer tags Tracklines of a multibeam survey of the sea floor offshore of Fire Island Inlet, New York, in 1998 (polyline shapefile, geographic, WGS 84) Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University... Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: Fire Island, Long Island, Middle Atlantic Bight, New York, New York Bight, All tags... North Atlantic Ocean, Simrad EM1000, WHCMSC field activity 1998-015-FA, location, mid-Atlantic Bight, multibeam, navigation, oceans, polyline shapefile, sea floor, sea floor mapping, tracklines, Fewer tags