Filters: Tags: renewable energy (X) > Categories: Data (X)
13 results (10ms)
Filters
Date Range
Extensions Types Contacts
Categories Tag Types Tag Schemes |
This dataset represents an update to U.S. Geological Survey Data Series 597. Locations and attributes of wind turbines in Colorado, 2009 (available at http://pubs.usgs.gov/ds/597/). This updated Colorado wind turbine Data Series provides geospatial data (fig. 1) for all 1,204 wind turbines established within the State of Colorado as of September 2011, an increase of 297 wind turbines from 2009.Attributes specific to each turbine include: turbine location, manufacturer and model, rotor diameter, hub height, rotor height, potential megawatt output, land ownership, county, and development status of the wind turbine. Wind energy facility data for each turbine include: facility name, facility power capacity, number of...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Colorado,
Energy Development,
Renewable Energy,
USA,
United States,
This map shows conservation element summaries within areas of potential near-term and long-term energy development. These summaries help highlight areas of potential conflict between conservation elements and energy development.
Categories: Data,
Map;
Types: ArcGIS REST Map Service,
Map Service;
Tags: Colorado Plateau,
potential conflicts,
potential development,
renewable energy,
transmission corridors
Renewable energy production can kill birds, but little is known about how it affects avian populations. We assessed vulnerability of populations for 23 priority bird species killed at wind and solar facilities in California, USA.
This data set consists of approved wind energy development facilities locations in the western United States. The data set was created by converting facilities polygons to point locations,.
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Arizona,
California,
Colorado,
Colorado Plateau,
Columbia Plateau,
This dataset represents an update to U.S. Geological Survey Data Series 596. Locations and attributes of wind turbines in New Mexico, 2009 (available at http://pubs.usgs.gov/ds/596/).This updated New Mexico wind turbine Data Series provides geospatial data for all 562 wind turbines established within the State of New Mexico as of June 2011, an increase of 155 wind turbines from 2009. Attributes specific to each turbine include: turbine location, manufacturer and model, rotor diameter, hub height, rotor height, potential megawatt output, land ownership, county, and development status of wind turbine. Wind energy facility data for each turbine include: facility name, facility power capacity, number of turbines associated...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Energy Development,
New Mexico,
Renewable Energy,
USA,
United States,
In 1967 and 1968 the USGS, in partnership with NASA and the National Park Service, extracted rock core from 13 locations in Yellowstone National Park. Depths of the holes ranged from 215 ft to 1,088 ft and the total drilled footage was 6,802 ft. The deepest hole was drilled in Norris Basin. Research on these cores provided critical understanding of complex geothermal systems that would inform the potential development of other systems, external to the park, as energy sources. These cores are extremely rare due to the many restrictions on sampling in the park. Years later, the cores were used to investigate the origin of some of Yellowstone supervolcano’s lavas using techniques that did not even exist when the cores...
Categories: Collection,
Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Collection,
National Park Service,
Yellowstone National Park,
bulk crustal melting,
caldera,
The Nature Conservancy - Great Lakes Program is leading the development of a scalable (Great Lakes wide, individual lake basin, to coastal reach within a lake basin) rule-based spatial model for ranking the relative importance of coastal lands and waters as habitat for migrating birds. Results will guide conservation actions including land acquisition, land and water management and restoration, and development of wind energy facilities. Specifically, the team will: 1) refine, create and integrate migratory bird stopover habitat models which depict the distribution of potential stopover sites along or near the shorelines of Lakes Michigan, Huron, Erie, and Ontario; and, 2) develop an online portal that will deliver...
Categories: Data,
Project;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: 2011,
2012,
2013,
Conservation NGOs,
Decision Support,
Four metrics were used to determine Collision Vulnerability: Diurnal and nocturnal flight activity, flight-height (defined as time spent in rotor sweep zone), and macro-avoidance. Nocturnal flight activity (NFA) and diurnal flight activity (DFA)—Nocturnal and diurnal flight activity can influence the risk of collision; therefore, we used available information to estimate the amount of time each species spent flying during night and during day. Time spent in the rotor sweep zone (RSZt)— the percentage of time each species spends flying at the same height as wind turbine blades (as opposed to above or below the sweeping zone of the blades) will influence collision vulnerability. Based on flight-height analyses and...
Categories: Data;
Types: Citation,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Biota,
California,
California Current System,
Environment,
Ocean wind energy,
Report: On-a-wing and a (GIS) Layer: Prioritizing migratory bird habitat along Great Lakes shoreline
The Nature Conservancy - Great Lakes Program is leading the development of a scalable (Great Lakes wide, individual lake basin, to coastal reach within a lake basin) rule-based spatial model for ranking the relative importance of coastal lands and waters as habitat for migrating birds. Results will guide conservation actions including land acquisition, land and water management and restoration, and development of wind energy facilities. Specifically, the team will: 1) refine, create and integrate migratory bird stopover habitat models which depict the distribution of potential stopover sites along or near the shorelines of Lakes Michigan, Huron, Erie, and Ontario; and, 2) develop an online portal that will deliver...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: 2011,
2012,
2013,
Conservation NGOs,
Decision Support,
This dataset contains Utah Renewable Energy Zone (UREZ) locations and areas with renewable energy potential for wind, solar and geothermal resources. The data are also available through a web service (select one of the options in the grey bar above the inset map).
Categories: Data;
Types: ArcGIS REST Map Service,
Map Service,
Shapefile;
Tags: Utah,
renewable energy
Two metrics were used to determine Collision Vulnerability: Macro-avoidance and habitat flexibility. Macro-avoidance (MA)—The macro-avoidance values for species indicate the species-specific probability of avoidance for birds associated with wind power infrastructure. For each species, we derived this value from observed macro-avoidance rates (via human observation and radar) at existing offshore wind power sites. In cases where species-specific data were not available, we used information from similar taxa. Habitat Flexibility (HF)—the degree to which a species shows habitat-specific feeding strategies (habitat flexibility) influences its vulnerability for displacement by offshore infrastructure. We evaluated literature...
Categories: Data;
Types: Citation,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Biota,
California,
California Current System,
Environment,
Ocean wind energy,
Six metrics were used to determine Population Vulnerability: global population size, annual occurrence in the California Current System (CCS), percent of the population present in the CCS, threat status, breeding score, and annual adult survival. Global Population size (POP)—to determine population size estimates for each species we gathered information tabulated by American Bird Conservancy, Birdlife International, and other primary sources. Proportion of Population in CCS (CCSpop)—for each species, we generated the population size within the CCS by averaging region-wide population estimates, or by combining state estimates for California, Oregon, and Washington for each species (if estimates were not available...
Categories: Data;
Types: Citation,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Biota,
California,
California Current System,
Environment,
Ocean wind energy,
These data represent locations of wind turbines found within Wyoming as of August 2012. We assigned each wind turbine to a wind farm and, in these data, provide information about each turbine’s potential megawatt output, rotor diameter, hub height, rotor height, the status of the land ownership where the turbine exists, the county each turbine is located in, wind farm power capacity, the number of units currently associated with each wind farm, the wind turbine manufacturer and model, the wind farm developer, the owner of the wind farm, the current purchaser of power from the wind farm, the year the wind farm went online, and the status of its operation. Some of the attributes are estimates based on the information...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Energy Development,
Renewable Energy,
USA,
United States,
Wind Energy,
|
|