Filters: Tags: sea-floor characteristics (X)
155 results (26ms)|
Filters
Date Range
Extensions Types Contacts
Categories Tag Types Tag Schemes |
ORWA26_500UTM is a digital bathymetric surface grid of the seafloor offthe coast of Washington and Oregon. Grid cell spacing is 500m and theprojection is UTM Zone 10.The surface was produced by gridding National Ocean Service (NOS)Hydrographic Surveys collected between 1926 and 1974 (primarily1926 to 1930). This work includes the most recent bathymetric dataavailable on a regional scale over the inner to outer continental shelfoff the coast of Washington and Oregon. The results represent thebest available estimate of the seafloor morphology for the time periodcirca 1926.
This metadata describes a digital elevation model (DEM) created from bathymetric and topographic data collected between 2017 and 2019 in the Sacramento River Deep Water Ship Channel (DWSC), northern Sacramento-San Joaquin Delta, California. We merged the newly collected bathymetric and topographic data presented in this data release (DOI:10.5066/P9AQSRVH) with 2019 surveys by the California Department of Water Resources (DWR) and 2017 USGS Sacramento Delta Lidar, to produce a seamless digital elevation model of the DWSC at a grid resolution of 1 m.
Geophysical and geological survey data were collected off Town Neck Beach in Sandwich, Massachusetts, in May and July 2016. Approximately 130 linear kilometers of subbottom (seismic-reflection) and 234-kilohertz interferometric sonar (bathymetric and backscatter) data were collected along with sediment samples, sea floor photographs, and (or) video at 26 sites within the geophysical survey area. Sediment grab samples were collected at 19 of the 26 sampling sites and video and (or) photographic imagery of the sea floor were taken at all 26 sites. These survey data are used to characterize the sea floor by identifying sediment-texture, seabed morphology, and underlying geologic structure and stratigraphy. Data collected...
Categories: Data;
Tags: Atlantic Ocean,
CMGP,
Cape Cod,
Cape Cod Bay,
Coastal and Marine Geology Program,
The Sandy Hook artificial reef, located on the sea floor offshore of Sandy Hook, New Jersey was built to create habitat for marine life. The reef was created by the placement of heavy materials on the sea floor; ninety-five percent of the material in the Sandy Hook reef is rock. In 2000, the U.S. Geological Survey surveyed the area using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard (CCG) ship Frederick G. Creed. The purpose of this multibeam survey, done in cooperation with the U.S. Army Corps of Engineers when the Creed was in the New York region in April 2000, was to map the bathymetry and backscatter intensity of the sea floor in the area of the Sandy Hook artificial reef. The collected...
Categories: Data;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Citation,
Downloadable,
Map Service;
Tags: GeoTIFF image,
Middle Atlantic Bight,
New Jersey,
New York,
New York Bight,
The data set consists of text files used to create the synthetic seismogram - City of Miramar, G-2946, (IW-2), Broward County, Florida.
Categories: Data;
Types: Citation;
Tags: Broward County,
Miami-Dade County,
USA,
United States,
data preservation,
The data set consists of time, depth, reflection coefficient synthetic, sonic velocity, density, and amplitude used to create synthetic seismogram - City of Hollywood Utility, G-2961, (HOL-IW1), Broward County, Florida.
Categories: Data;
Types: Citation;
Tags: Broward County,
Miami-Dade County,
USA,
United States,
data preservation,
High-resolution multibeam data were collected by the U.S. Geological Survey (USGS) and the Alaska Department of Fish and Game in May of 2014 southwest of Chenega Island, Alaska. Data were collected aboard the Alaska Department of Fish and Game vessel, R/V Solstice, during USGS field activity 2014-622-FA, using a pole mounted 100-kHz Reson 7111 multibeam echosounder.
High-resolution multibeam data were collected by the U.S. Geological Survey (USGS) and the Alaska Department of Fish and Game in May of 2014 southwest of Montague Island, Alaska. Data were collected aboard the Alaska Department of Fish and Game vessel, R/V Solstice, during USGS field activity 2014-622-FA, using a pole mounted 100-kHz Reson 7111 multibeam echosounder.
The Sandy Hook artificial reef, located on the sea floor offshore of Sandy Hook, New Jersey was built to create habitat for marine life. The reef was created by the placement of heavy materials on the sea floor; ninety-five percent of the material in the Sandy Hook reef is rock. In 2000, the U.S. Geological Survey surveyed the area using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard (CCG) ship Frederick G. Creed. The purpose of this multibeam survey, done in cooperation with the U.S. Army Corps of Engineers when the Creed was in the New York region in April 2000, was to map the bathymetry and backscatter intensity of the sea floor in the area of the Sandy Hook artificial reef. The collected...
Categories: Data;
Tags: Geomorphology,
Mid-Atlantic Bight,
Middle Atlantic Bight,
New Jersey,
New York,
Grain size distribution and bulk density are reported for sediment samples from two flooded agricultural tracts, Little Holland Tract and Liberty Island, in the Sacramento-San Joaquin Delta, California. Samples were repeatedly collected at 8 sites using a Ponar grab or push core samplers during 19 visits to the study area from 2015 to 2019. The long-term time series data collection stations (sites LWA, HVB, HWC, and LVB) were sampled on almost every field survey, and the remaining sites were sampled 6 or times or fewer, some only once. All samples were analyzed for grain size distribution and some were analyzed for bulk density. These data provide insight into how particle size distributions varied spatially and...
Categories: Data;
Tags: CMGP,
Coastal and Marine Geology Program,
Liberty Island,
Little Holland Tract,
Oceans,
Geophysical and geological survey data were collected off Town Neck Beach in Sandwich, Massachusetts, in May and July 2016. Approximately 130 linear kilometers of subbottom (seismic-reflection) and 234-kilohertz interferometric sonar (bathymetric and backscatter) data were collected along with sediment samples, sea floor photographs, and (or) video at 26 sites within the geophysical survey area. Sediment grab samples were collected at 19 of the 26 sampling sites and video and (or) photographic imagery of the sea floor were taken at all 26 sites. These survey data are used to characterize the sea floor by identifying sediment-texture, seabed morphology, and underlying geologic structure and stratigraphy. Data collected...
Integrated terrain models covering 16,357 square kilometers of the Massachusetts coastal zone and offshore waters were built to provide a continuous elevation and bathymetry terrain model for ocean planning purposes. The area is divided into the following four geographical areas to reduce file size and facilitate publishing: Massachusetts Bay from the Massachusetts-New Hampshire border south to Provincetown and Scituate and east to Stellwagen Bank; Cape Cod Bay from Provincetown to Scituate and south to Hyannis; Buzzards Bay from the Cape Cod Canal southwest to the State border including the Elizabeth Islands and extending north to Fall River and Mount Hope Bay; and Nantucket and Vineyard Sounds, from Hyannis south...
Integrated terrain models covering 16,357 square kilometers of the Massachusetts coastal zone and offshore waters were built to provide a continuous elevation and bathymetry terrain model for ocean planning purposes. The area is divided into the following four geographical areas to reduce file size and facilitate publishing: Massachusetts Bay from the Massachusetts-New Hampshire border south to Provincetown and Scituate and east to Stellwagen Bank; Cape Cod Bay from Provincetown to Scituate and south to Hyannis; Buzzards Bay from the Cape Cod Canal southwest to the State border including the Elizabeth Islands and extending north to Fall River and Mount Hope Bay; and Nantucket and Vineyard Sounds, from Hyannis south...
The Atlantic Beach artificial reef, located on the sea floor 3 nautical miles south of Atlantic Beach, New York in about 20 meters water depth, was built to create habitat for marine life. The reef was originally created by placing heavy materials such as tires, automobile bodies and other vehicles, barges, and rock from a dredging project on the sea floor. In 2000, the U.S. Geological Survey surveyed the area using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard (CCG) ship Frederick G. Creed. The purpose of this multibeam survey, done in cooperation with the U.S. Army Corps of Engineers when the Creed was in the New York region in April 2000, was to map the bathymetry and backscatter intensity...
Types: Citation;
Tags: Atlantic Beach artificial reef,
GeoTIFF image,
Middle Atlantic Bight,
New Jersey,
New York,
The data set consists of text files used to create the synthetic seismogram - Miami-Dade County North District, G-3805, (IW-3N), Miami-Dade County, Florida.
Categories: Data;
Types: Citation;
Tags: Broward County,
Miami-Dade County,
USA,
United States,
data preservation,
The data set consists of time, depth, reflection coefficient synthetic, sonic velocity, density, and amplitude used to create synthetic seismogram - City of Sunrise Utility, G-2981, Broward County, Florida.
Categories: Data;
Types: Citation;
Tags: Broward County,
Miami-Dade County,
USA,
United States,
data preservation,
The data set consists of time, depth, reflection coefficient synthetic, sonic velocity, density, and amplitude used to create synthetic seismogram - City of Sunrise Utility, SUN-I3, Broward County, Florida.
Categories: Data;
Types: Citation;
Tags: Broward County,
Miami-Dade County,
USA,
United States,
data preservation,
The data set consists of time, depth, reflection coefficient synthetic, sonic velocity, density, and amplitude used to create synthetic seismogram - Deerfield Beach BHC, G-2968, Broward County, Florida.
Categories: Data;
Types: Citation;
Tags: Broward County,
Miami-Dade County,
USA,
United States,
data preservation,
This part of DS 781 presents data for the acoustic-backscatter map of Offshore of Aptos map area, California. Backscatter data are provided as two separate grids depending on mapping system and processing method. This metadata file refers to the data included in "BackscatterB_EM300_OffshoreAptos.zip," which is accessible from https://doi.org/10.5066/F7K35RQB. These data accompany the pamphlet and map sheets of Cochrane, G.R., Johnson, S.Y., Dartnell, P., Greene, H.G., Erdey, M.D, Dieter, B.E., Golden, N.E., Hartwell, S.R., Ritchie, A.C., Kvitek, r.G., Maier, K.L., Endris, C.A., Davenport, C.W., Watt, J.T., Sliter, R.W., Finlayson, D.P., and Krigsman, L.M., (G.R. Cochrane and S.A. Cochran, eds.), 2016, California...
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: Acoustic Reflectivity,
Aptos,
Backscatter,
Bathymetry,
CMHRP,
This part of the data release presents a digital elevation model (DEM) created from bathymetry data collected on February 1, 2011, in the Sacramento River from the confluence of the Feather River to Knights Landing. The data were collected by the USGS Pacific Coastal and Marine Science Center (PCMSC) team with collaboration and funding from the U.S. Army Corps of Engineers. This project used interferometric sidescan sonar to characterize the riverbed and channel banks along a 12 mile reach of the Sacramento River, California (River Mile 79 through River Mile 91) to aid in the understanding of fish response to the creation of safe habitat associated with levee restoration efforts in two 1.5 mile reaches of the Sacramento...
Categories: Data;
Types: Citation;
Tags: Bathymetry and Elevation,
Echo Sounders,
Feather River,
GPS (Global Positioning System),
Geophysics,
|
|
