Skip to main content
Advanced Search

Filters: Tags: structural geology (X) > Date Range: {"choice":"year"} (X)

76 results (51ms)   

View Results as: JSON ATOM CSV
thumbnail
The Colorado Plateau structural province features long monoclinal flexures between uplifts and basins that are the major lines of deformation within and marginal to the Plateau. These folds are named, well-known, and have been described as part of several previous tectonic syntheses of the Colorado Plateau (Kelley, 1955; Davis, 1978; 1999). However, no digital data have ever been created that locate these folds in digital map space. This digital dataset compiles mapped locations of monoclinal folds from several geologic maps from the Colorado Plateau, most released only in “paper”, non-vector format. Fold names and their general map trace were guided by regional-scale maps that synthesize the tectonic elements of...
thumbnail
Compilation of field data collected in the Oregon Coast Range Tyee Formation. Location, strike and dip, Relative composition and bed thickness of interbedded sandstone and siltstone, Schmidt Hammer stiffness, notes, and sampled landslide density are provided. Landslide density is calculated using the manually mapped landslide deposit polygons from LaHusen et al. (2020).
thumbnail
This dataset of the elevation of basement and thickness of sediment above the syn- and post-rift unconformity (sediments above being generally Late Cretaceous and younger) was constructed for application to site response models in earthquake hazard analyses. Sediment thickness in meters is provided in zipped csv format on a 0.01-degree grid, and sediment thickness and basement elevation in meters relative to mean sea level are provided in GeoTIFF format on a 1-km grid.
thumbnail
Note: This data release has been superseded, available here: https://doi.org/10.5066/P9MYL7WJ This data release contains processed high-resolution multichannel sparker seismic-reflection (MCS) data that were collected aboard Humboldt State University’s R/V Coral Sea in October of 2018 on U.S. Geological Survey cruise 2018-658-FA on the shelf and slope between Cape Blanco, Oregon, and Cape Mendocino, California. MCS data were collected to characterize quaternary deformation and sediment dynamics along the southern Cascadia margin.
thumbnail
Multichannel minisparker and boomer seismic-reflection and chirp sub bottom data were collected by the U.S. Geological Survey in September of 2013 in Port Valdez, Alaska. Data were collected aboard the USGS R/V Alaskan Gyre during field activity G-01-13-GA. Sub-bottom acoustic penetration spans several hundreds of meters and is variable by location. High-resolution multichannel seismic-reflection data were acquired to support the U.S. Geological Survey Alaska coastal and marine hazards project to explore the sedimentary structure of tsunamigenic landslide deposits around an IODP drill site in Port Valdez. These data and information are intended for science researchers, students from elementary through college, policy...
thumbnail
High-resolution acoustic backscatter data, bathymetry data, single channel minisparker seismic-reflection data were collected by the U.S. Geological Survey (USGS) and the Alaska Department of Fish and Game in May of 2014 southwest of Chenega Island and southwest of Montague Island, Alaska. Data were collected aboard the Alaska Department of Fish and Game vessel, R/V Solstice, during USGS field activity 2014-622-FA, using a pole mounted 100-kHz Reson 7111 multibeam echosounder, a 500 Joule SIG 2-mille minisparker sound source and a single channel streamer.
thumbnail
This dataset is intended to provide seamless, integrated geologic mapping of the U.S. Intermountain West region as a contribution to The National Geologic Map supported by the National Cooperative Geologic Mapping Program of the U.S. Geological Survey. Surficial and bedrock geology are included in this data release as independent datasets at a variable resolution from 1:50,000 to 1:250,000 scale. No original interpretations are presented in this dataset; rather, all interpretive data are assimilated from referenceable publications. Derivative polygon features created for this dataset demonstrate the distribution of SIGMa-GeMS Geologic Provinces derived from the distribution of map units. Initial contributions to...
The geology of an area of 660 square miles mostly in the northeastern corner of Tennessee and small adjacent areas in Virginia and North Carolina is the subject of this report. The region lies principally in the Unaka province, with extensions northwestward into the Appalachian Valley and southwestward into the Blue Ridge province. The report combines results of surveys made between 1941 and 1953 by the U. S. Geological Survey, the Tennessee Division of Geology, and the Tennessee Valley Authority, and is published in cooperation with the Tennessee Division of Geology. Northeasternmost Tennessee is a region of widespread mineralization and was formerly important for mineral production. Iron, manganese, and bauxite...
Tags: Abingdon, Alluvium, Andesite, Argillite, Arkose, All tags...
thumbnail
We present whole-rock geochemical analyses of 12 core samples obtained from three serpentinite mud volcanoes (Yinazao, Asut Tesoru, and Fantangisna) located on the forearc of the Mariana subduction system, where the Pacific Plate descends beneath the Philippine Sea Plate. The core was collected during International Ocean Discovery Program Expedition 366 of 2016-2017. The materials comprising the mud volcanoes have risen diapirically along normal faults in the forearc that may extend down to the subducting slab. Ten of the samples are thoroughly serpentinized ultramafic rocks. The other two come from cored intervals into Fantangisna mud volcano that contain materials derived from the subducting Pacific Plate, and...
thumbnail
This data release contains a geospatial database related to a digital 3D hydrogeologic framework model (3D HFM) of the Eel River Valley groundwater basin, California. The geospatial database contains two main data elements: (1) input data to the 3D HFM; (2) interpolated elevations and thicknesses of hydrogeologic units as a cellular array, which are a spatial representation of the 3D HFM results. Three hydrogeologic framework models of the same extent and similar conceptualization but successively increasing complexity were developed to characterize the structure, thickness, and extent of the materials within the basin; data from each phase of model-building are contained in this data release. The Phase 1 3D HFM...
thumbnail
This U.S. Geological Survey (USGS) data release for the geologic map of the Arlington quadrangle, Carbon County, Wyoming, is a Geologic Map Schema (GeMS, 2020)-compliant version of the printed geologic map published in USGS Geologic Map Quadrangle GQ-643 (Hyden and others, 1967). The database represents the geology for the 35,776-acre map plate at a publication scale of 1:24,000. References: Hyden, H.J., King, J.S., and Houston, R.S., 1967, Geologic map of the Arlington quadrangle, Carbon County, Wyoming: U.S. Geological Survey, Geologic Quadrangle Map GQ-643, scale 1:24,000; https://doi.org/10.3133/gq643. U.S. Geological Survey National Cooperative Geologic Mapping Program, 2020, GeMS (Geologic Map Schema) -...
thumbnail
This digital map shows the areal extent of surficial deposits and rock stratigraphic units (formations) as compiled by Trimble and Machette from 1973 to 1977 and published in 1979 under the Front Range Urban Corridor Geology Program. Trimble and Machette compiled their geologic map from published geologic maps and unpublished geologic mapping having varied map unit schemes. A convenient feature of the compiled map is its uniform classification of geologic units that mostly matches those of companion maps to the north (USGS I-855-G) and to the south (USGS I-857-F). Published as a color paper map, the Trimble and Machette map was intended for land-use planning in the Front Range Urban Corridor. This map recently (1997-1999)...
Tags: Adams County, Arapahoe County, Arapahoe Formation, Colorado, Colorado Front Range, All tags...
thumbnail
This release includes aeromagnetic data collected via low-altitude helicopter flown over northeastern Washington State, centered over the town of Republic, Washington. The data were acquired between September 26, 2022 and August 21, 2023 by Precision Geosurveys, Inc. of Langley, British Columbia and processed by EDCON-PRJ, Inc. of Lakewood, Colorado, contracted by the U.S. Geological Survey and funded through the Earth Mapping Resources Initiative (EarthMRI). The survey includes gridded data from target altitude of 80-100 meters above ground level, subject to aircraft climb and descent limitations. Primary transverse flight lines were flown in the east-west direction and spaced 200 meters apart. Tie lines were flown...
thumbnail
This data release contains 25 multichannel minisparker seismic reflection (MCS) profiles and 41 chirp sub-bottom profiles that were collected in February of 2016 from the Catalina Basin offshore southern California by the U.S. Geological Survey Pacific and Coastal Marine Science Center in cooperation with the University of Washington. Data were collected aboard the University of Washington’s R/V Thomas G. Thompson on USGS cruise 2016-616-FA. MCS profiles were collected to image the Catalina and San Clemente fault systems as well as the San Gabriel Canyon and Channel system.
thumbnail
High-resolution multichannel minkisparker seismic-reflection (MCS) profiles were collected by the U.S. Geological Survey in September and October of 2016 from the northern portion of the Santa Barbara Basin offshore southern California. Data were collected aboard the USGS R/V Parke Snavely and NOAA R/V Shearwater during field activity 2016-666-FA. Data were acquired to support USGS geologic hazards projects to aide hazard assessment within the Santa Barbara Basin. High-resolution multichannel minisparker seismic-reflection, multibeam-bathymetry and acoustic-backscatter data were collected to investigate the causes and consequences of submarine landslides in the Santa Barbara Basin. These data and information are...
thumbnail
Note: this data release is currently being revised and is temporarily unavailable. This file includes strike and dip information for the area of the Stillwater Complex, located in southwestern Montana. This dataset was created from pre-existing digital strike and dip information and from digitizing strike and dip locations from georeferenced map images. The data includes information about the strike and dip locations; the geologic unit and rock type the measurement was taken on; information about the source map, such as map title and scale; and other miscellaneous information.
thumbnail
This digital data release contains gridded elevation surfaces for twenty-six (26) subsurface horizons, a grid of the estimated thickness of strata eroded during the Cenozoic, and fault traces at the level of the Precambrian surface from a previously published 3D geologic model of the Anadarko Basin Province (Higley and others, 2014). In the original release of the 3D model, elevation surfaces were exported to a Zmap interchange file format, potentially limiting access to the data for users without access to specialized software. In this digital data release, elevation surfaces are provided in more readily accessible formats and modeled horizons are given more thorough stratigraphic descriptions than provided in...
thumbnail
This Data Release contains three related databases for the Central and Eastern United States: 1) A fault sections database (“NSHM2023_FaultSections_CEUS_v1”), which depicts the geometry of faults capable of hosting independent earthquakes, 2) A fault zone polygon database ("NSHM2023_FaultPolygons_CEUS_v1"), which depicts the geometry of distributed fault zones capable of hosting repeated large magnitude events but a specific fault source remains unidentified, and 3) An earthquake geology site information database (“NSHM2023_EQGeoDB_CEUS_v1”), which contains fault slip-rate and earthquake recurrence constraints at points. These databases were prepared in anticipation of updates to the National Seismic Hazard Model...
This collection consists of geological samples associated with the research of USGS Scientist Emeritus Michael J. Kunk. The collection contains rock samples stemming from Kunk’s earth science research in North America on geochronology, geochemistry, landscape evolution, volcanology, mineralogy, and structural geology. This collection contains four pallets of geological samples and materials.


map background search result map search result map Multichannel sparker seismic reflection data of USGS field activity 2018-658-FA collected between Cape Blanco and Cape Mendocino from 2018-10-04 to 2018-10-18 Multichannel minisparker and chirp seismic reflection data of USGS field activity 2016-616-FA collected in the Catalina Basin offshore southern California in February 2016 Chirp, multichannel minisparker, and boomer seismic-reflection data from USGS field activity G-01-13-GA collected in Port Valdez, Alaska, in September 2013 Hydrogeologic Framework data and models for the Eel River groundwater basin, Humboldt County, California Earthquake geology inputs for the National Seismic Hazard Model (NSHM) 2023 (central and eastern United States), version 1.0 Digital database of the previously published geologic map of the greater Denver area, Front Range Urban Corridor, Colorado GIS Data for the Geologic Map of the Arlington Quadrangle, Carbon County, Wyoming Atlantic and Gulf Coastal Plains Sediment Thickness (v220517) Digital database of previously published subsurface unit tops from a 3D Model of the Anadarko Basin Province Airborne radiometric flight line data, western Arkansas, 2022 Whole-rock chemistry of core from serpentinite mud volcanoes, Northern Mariana subduction zone The USGS Michael J. Kunk Geological Sample Collection Bedrock stratigraphic and structural data and deep-seated landslide density for the Tyee Formation, OR, USA Digital location of monoclines and structural uplifts of the Colorado Plateau, Arizona, Colorado, New Mexico, and Utah High-resolution airborne magnetic survey of the Republic Graben, Okanogan and Kettle metamorphic core complexes, Kootenay Arc and surrounding regions, Northeastern Washington Seamless Integrated Geologic Map Database of the Intermountain West: Contributions to The National Geologic Map Stillwater Complex Strike and Dip Database (Under Revision) GIS Data for the Geologic Map of the Arlington Quadrangle, Carbon County, Wyoming Stillwater Complex Strike and Dip Database (Under Revision) Hydrogeologic Framework data and models for the Eel River groundwater basin, Humboldt County, California Digital database of the previously published geologic map of the greater Denver area, Front Range Urban Corridor, Colorado Airborne radiometric flight line data, western Arkansas, 2022 Bedrock stratigraphic and structural data and deep-seated landslide density for the Tyee Formation, OR, USA Seamless Integrated Geologic Map Database of the Intermountain West: Contributions to The National Geologic Map Whole-rock chemistry of core from serpentinite mud volcanoes, Northern Mariana subduction zone High-resolution airborne magnetic survey of the Republic Graben, Okanogan and Kettle metamorphic core complexes, Kootenay Arc and surrounding regions, Northeastern Washington Multichannel minisparker and chirp seismic reflection data of USGS field activity 2016-616-FA collected in the Catalina Basin offshore southern California in February 2016 Multichannel sparker seismic reflection data of USGS field activity 2018-658-FA collected between Cape Blanco and Cape Mendocino from 2018-10-04 to 2018-10-18 Digital database of previously published subsurface unit tops from a 3D Model of the Anadarko Basin Province Digital location of monoclines and structural uplifts of the Colorado Plateau, Arizona, Colorado, New Mexico, and Utah Earthquake geology inputs for the National Seismic Hazard Model (NSHM) 2023 (central and eastern United States), version 1.0 Atlantic and Gulf Coastal Plains Sediment Thickness (v220517) The USGS Michael J. Kunk Geological Sample Collection