Filters: Tags: study area (X)
31 results (47ms)|
Filters
Contacts
(Less)
|
The mapped area boundary, flood inundation extents, and depth rasters were created to provide an estimated extent of flood inundation along the Greenbrier River within the community of Alderson, West Virginia. These geospatial data include the following items: 1. greenbrier_ald_bnd; shapefile containing the polygon showing the mapped area boundary for the Greenbrier River flood maps, 2. greenbrier_ald_hwm; shapefile containing high-water mark points, 3. polygon_greenbrier_ald_hwm; shapefile containing mapped extent of flood inundation, derived from the water-surface elevation surveyed at high-water marks, 4. depth_hwm; raster file for the flood depths derived from the water-surface elevation surveyed at high-water...
In 2015, the second of several Regional Stream Quality Assessments (RSQA) was done in the southeastern United States. The Southeast Stream Quality Assessment (SESQA) was a study by the U.S. Geological Survey (USGS) National Water Quality Assessment (NAWQA) project. One of the objectives of the RSQA, and thus the SESQA, is to characterize the relationships between water-quality stressors and stream ecology and subsequently determine the relative effects of these stressors on aquatic biota within the streams (Van Metre and Journey, 2014). To meet this objective, a framework of fundamental geospatial data was required to develop physical and anthropogenic characteristics of the study region, sampled sites and corresponding...
These polygon boundaries, inundation extents, and depth rasters were created to provide an extent of flood inundation along the Lumber River within the community of Fair Bluff, North Carolina. The upstream and downstream reach extent is determined by the location of high-water marks, not extending the boundary far past the outermost high-water marks. In areas of uncertainty of flood extent, the model boundary is lined up with the flood inundation polygon extent. This boundary polygon was used to extract the final flood inundation polygon and depth layer from the flood water surface raster file. The passage of Hurricane Matthew through central and eastern North Carolina during October 7-9, 2016, brought heavy rainfall...
Represents past, current, and future study areas related to potential land acquistion.
These polygon boundaries, inundation extents, and depth rasters were created to provide an extent of flood inundation along the Lumber River within the community of Lumberton, North Carolina. The upstream and downstream reach extent is determined by the location of high-water marks, not extending the boundary far past the outermost high-water marks. In areas of uncertainty of flood extent, the model boundary is lined up with the flood inundation polygon extent. This boundary polygon was used to extract the final flood inundation polygon and depth layer from the flood water surface raster file. The passage of Hurricane Matthew through central and eastern North Carolina during October 7-9, 2016, brought heavy rainfall...
This is a coverage of the Colorado Plateau coal assessment study area. The study area outline was drawn on the county lines that most closely outline the coal-bearing rocks in the Colorado Plateau Region. The county outlines originate from a national coverage for which lines were extracted from U.S. Census 1990 TIGER/line files using an AML program written by Nebert, D., and Negri, M., USGS-Water Resources Division (WRD), running on two Data General 6220 servers.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Arizona,
Census Bureau,
Colorado,
Colorado Plateau,
Colorado Plateau coal assessment,
The mapped area boundary, flood inundation extents, and depth rasters were created to provide an estimated extent of flood inundation along the Meadow River and Sewell Creek within the community of Rainelle, West Virginia. These geospatial data include the following items: 1. meadow_sewell_bnd; shapefile containing the polygon showing the mapped area boundary for the Meadow River and Sewell Creek flood maps, 2. meadow_sewell_hwm; shapefile containing high-water mark points, 3. polygon_meadow_sewell_hwm; shapefile containing mapped extent of flood inundation, derived from the water-surface elevation surveyed at high-water marks, 4. depth_hwm; raster file for the flood depths derived from the water-surface elevation...
This rectangle encloses the area covered by the Southern Rockies Conservation Cooperative
This ArcView shapefile contains a polygon representation of the northern part (Jim Bridger area) of the Point of Rocks-Black Butte coalfield in the Greater Green River Basin, Wyoming. This boundary is a part of the National Coal Resource Assessment of the Northern Rocky Mountain and Great Plains Fort Union Coal Resources Assessment Area. This shapefile can be shown in relation to other relevant themes of this area.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Boundary,
Coal zone,
Deadman coal zone,
Geology,
Greater Green River Basin,
These ArcView shapefiles contain representations of the study areas for the Ferris coal zones in the Ferris coalfield, Hanna Basin, Wyoming. These datasets were created specifically for the National Coal Resource Assessment in the Northern Rocky Mountains and Great Plains Region.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Boundary,
Carbon County,
Coal,
Coal zone,
Ferris 23 coal zone,
The study area boundary used to define the extant of the enduring features model. This boundary is the Outer Fjordland; Georgia Strait provincial ecosection and includes a version buffered by 40 km.
The mapped area boundary, flood inundation extents, and depth rasters were created to provide an estimated extent of flood inundation along the Gauley River within the community of Camden-on-Gauley, West Virginia. These geospatial data include the following items: 1. gauley_bnd; shapefile containing the polygon showing the mapped area boundary for the Gauley River flood maps, 2. gauley_hwm; shapefile containing high-water mark points, 3. polygon_gauley_hwm; shapefile containing mapped extent of flood inundation, derived from the water-surface elevation surveyed at high-water marks, 4. depth_hwm; raster file for the flood depths derived from the water-surface elevation surveyed at high-water marks, 5. polygon_gauley_dem;...
These polygon boundaries, inundation extents, and depth rasters were created to provide an extent of flood inundation along the Neuse River within the community of Kinston, North Carolina. The upstream and downstream reach extent is determined by the location of high-water marks, not extending the boundary far past the outermost high-water marks. In areas of uncertainty of flood extent, the model boundary is lined up with the flood inundation polygon extent. This boundary polygon was used to extract the final flood inundation polygon and depth layer from the flood water surface raster file. The passage of Hurricane Matthew through central and eastern North Carolina during October 7-9, 2016, brought heavy rainfall...
The study area was defined so as to span the Crown of the Continent, Salmon-Selway, and Greater Yellowstone Ecosystem, and was delineated based on EPA Ecoregions as described in the Processing Steps.
Categories: Data;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Shapefile;
Tags: Biology,
Biology,
Conservation,
Conservation,
Crown of the Continent,
The Tokio Formation in southwestern Arkansas, hereafter referred to as the Tokio aquifer, is a source of groundwater for agricultural, domestic, industrial, and public use in Clark, Hempstead, Little River, Miller, Pike, and Nevada counties. Water-level altitudes measured 42 wells completed in the Tokio aquifer during 2014 and 2015 were used to create a potentiometric-surface map. In southwestern Arkansas, potentiometric surfaces indicate that groundwater flow in the Tokio aquifer is towards the city of Hope. Northwest of the city of Hope, a cone of depression may exist. In southwestern Pike, northwestern Nevada, and northeastern Hempstead Counties, an area of artesian flow (water levels are at or above land surface)...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Nacatoch,
Tokio,
potentiometric surface,
study area
These polygon boundaries, inundation extents, and depth rasters were created to provide an extent of flood inundation along the Neuse River within the community of Goldsboro, North Carolina. The upstream and downstream reach extent is determined by the location of high-water marks, not extending the boundary far past the outermost high-water marks. In areas of uncertainty of flood extent, the model boundary is lined up with the flood inundation polygon extent. This boundary polygon was used to extract the final flood inundation polygon and depth layer from the flood water surface raster file. The passage of Hurricane Matthew through central and eastern North Carolina during October 7-9, 2016, brought heavy rainfall...
The mapped area boundary, flood inundation extents, and depth rasters were created to provide an estimated extent of flood inundation along the Greenbrier River within the community of Ronceverte, West Virginia. These geospatial data include the following items: 1. greenbrier_ron_bnd; shapefile containing the polygon showing the mapped area boundary for the Greenbrier River flood maps, 2. greenbrier_ron_hwm; shapefile containing high-water mark points, 3. polygon_greenbrier_ron_hwm; shapefile containing mapped extent of flood inundation, derived from the water-surface elevation surveyed at high-water marks, 4. depth_hwm; raster file for the flood depths derived from the water-surface elevation surveyed at high-water...
The mapped area boundary, flood inundation extents, and depth rasters were created to provide an estimated extent of flood inundation along the New River within the community of Hinton, West Virginia. These geospatial data include the following items: 1. newriver_bnd; shapefile containing the polygon showing the mapped area boundary for the New River flood maps, 2. newriver_hwm; shapefile containing high-water mark points, 3. polygon_newriver_hwm; shapefile containing mapped extent of flood inundation, derived from the water-surface elevation surveyed at high-water marks, 4. depth_hwm; raster file for the flood depths derived from the water-surface elevation surveyed at high-water marks, 5. polygon_newriver_dem;...
The mapped area boundary, flood inundation extents, and depth rasters were created to provide an estimated extent of flood inundation along the Howard Creek within the communities of White Sulphur Springs and Caldwell, West Virginia. These geospatial data include the following items: 1. howard_bnd; shapefile containing the polygon showing the mapped area boundary for the Howard Creek flood maps, 2. howard_hwm; shapefile containing high-water mark points, 3. polygon_howard_hwm; shapefile containing mapped extent of flood inundation, derived from the water-surface elevation surveyed at high-water marks, 4. depth_hwm; raster file for the flood depths derived from the water-surface elevation surveyed at high-water marks,...
This dataset represents the study area boundary (polygon) for the San Luis Valley-Taos Plateau Landscape Assessment.
|
|
