Skip to main content
Advanced Search

Filters: partyWithName: Water Resources (X) > Types: Citation (X)

Folders: ROOT > Users ( Show direct descendants )

128 results (11ms)   

Location

Folder
ROOT
_Users
Filters
Date Range
Extensions
Types
Contacts
Categories
Tag Types
Tag Schemes
View Results as: JSON ATOM CSV
thumbnail
Bathymetric survey data of the Brandon Road Dam spillway was collected on May 27 and May 28, 2015 by the US Geological Survey (USGS) using Trimble Real-Time Kinematic Global Positioning System (RTK-GPS) equipment. The base station was set up over a temporarily installed survey pin on both days. This pin was surveyed into an existing NGS benchmark (PID: BBCN12) within the Brandon Road Lock property. In wadeable sections, a GPS rover with 2.0 meter range pole and flat-foot was deployed. In sections unable to be waded, a 2.0 meter range pole was fix-mounted to a jon boat, and a boat-mounted Acoustic Doppler Current Profiler (ADCP) was used to collect the depth data. ADCP depth data were reviewed in the WinRiver II...
thumbnail
Water velocities and discharge were measured in the lock chamber and immediately downstream of Brandon Road Lock on the Des Plaines River at river mile 286 on December 9-10, 2014 using Teledyne RDI Rio Grande 600 and 1200 kHz acoustic Doppler current profilers (ADCP). The data were georeferenced with a differential GPS receiver with submeter accuracy. These ADCP measurements were collected in support of the US Army Corps of Engineers Great Lakes and Mississippi River Interbasin Study (GLMRIS). Velocity measurements were processed using the Velocity Mapping Toolbox (Parsons and others, 2013) to derive temporally- and spatially-averaged water velocity values. Discharge measurements were processed with the QRev discharge...
thumbnail
From 2013 to 2015, bathymetric surveys of New York City’s six West of Hudson reservoirs (Ashokan, Cannonsville, Neversink, Pepacton, Rondout, and Schoharie) were performed to provide updated capacity tables and bathymetric maps. Depths were surveyed with a single-beam echo sounder and real-time kinematic global positioning system (RTK-GPS) along planned transects at predetermined intervals for each reservoir. A separate set of echo sounder data was collected along transects at oblique angles to the main transects for accuracy assessment. Field survey data was combined with water-surface elevations in a geographic information system to create three-dimensional surfaces representing reservoir-bed elevations in the...
thumbnail
Water-surface elevations were recorded by submerged pressure transducers in Spring, 2015 along the upper Willamette River, Oregon, between Eugene and Corvallis. The water-surface elevations were surveyed by using a real-time kinematic global positioning system (RTK-GPS) at each pressure sensor location. These water-surface elevations were logged over a small range of discharges, from 4,600 cubic feet per second to 10,800 cubic feet per second at Harrisburg, OR. These datasets were collected for equipment calibration and validation for the National Aeronautics and Space Administration’s (NASA) Surface Water and Ocean Topography (SWOT) satellite mission. This is one of multiple datasets that will be released for this...
thumbnail
This dataset consists of a series of rasters covering the conterminous United States. Each raster is a one kilometer (km) grid for 18 selected Census of Agriculture statistics mapped to land use pixels for the time period 1950 to 2012. A supplemental set of 9 statistics mapped at the entire county level are also provided as 1-km rasters. The rasters are posted as ArcGIS grids. The statistics represent values for crops, livestock, irrigation, fertilizer, and manure usage. Most statistics are mapped for all 14 Census of Agriculture reporting years in that time frame: 1950, 1954, 1959, 1964, 1969, 1974, 1978, 1982, 1987, 1992, 1997, 2002, 2007, and 2012.
thumbnail
Water surface elevations within seven Willamette River off-channel features (OCF; alcoves and side channels) were measured using submerged pressure transducers. Transducers were installed from late May through mid-October, 2016, when discharge of the Willamette River was between approximately 5,500 and 45,000 cubic feet per second at Salem, Oregon (USGS gage 14191000) and 3,500 to 17,500 cubic feet per second at Harrisburg, Oregon (USGS gage 14166000). Pressure transducer sensor depth was measured at all seven sites. For five of the sites, pressure transducer sensor depths were converted to water surface elevations by surveying the water surface at each transducer with a real-time kinematic global positioning system...
thumbnail
The dataset is a model archive containing all relevant files to document and re-run the models that are discussed in the report: Fenelon, J.M., Halford, K.J., and Moreo, M.T., 2016, Delineation of the Pahute Mesa-Oasis Valley groundwater basin, Nevada: U.S. Geological Survey Scientific Investigations Report 2015-5175, http://dx.doi.org/10.3133/sir20155175.
thumbnail
This metadata record describes monthly input and output data covering the period 1900-2015 for a water-balance model described in McCabe and Wolock (2011). The input datasets are precipitation (PPT) and air temperature (TAV) from the PRISM group at Oregon State University. The model outputs include estimated potential evapotranspiration (PET), actual evapotranspiration (AET), runoff (RUN) (streamflow per unit area), soil moisture storage (STO), and snowfall (SNO). The datasets are arranged in tables of monthly total or average values measured in millimeters or degrees C and then multiplied by 100. The data are indexed by the identifier PRISMID, which refers to an ASCII raster of cells in an associated file named...
thumbnail
Geophysical methods were used to monitor infiltration during a water release, referred to as a “pulse flow”, in the Colorado River delta in March and April 2014. The pulse flow was enabled by Minute 319 of the 1944 United States-Mexico Treaty concerning water of the Colorado River. Field work was carried out by the U.S. Geological Survey and the Centro de Investigación Científica y de Educación Superior de Ensenada as part of a binational effort to monitor the hydrologic effects of the pulse flow along the limitrophe (border) reach of the Colorado River, and into Mexico. Repeat microgravity measurements were made at 25 locations in the southern limitrophe reach to quantify aquifer storage change during the pulse...
thumbnail
In 1991, the U.S. Geological Survey (USGS) began a study of more than 50 major river basins across the Nation as part of the National Water-Quality Assessment (NAWQA) project of the National Water-Quality Program. One of the major goals of the NAWQA project is to determine how water-quality conditions change over time. To support that goal, long-term consistent and comparable monitoring has been conducted on streams and rivers throughout the Nation. Outside of the NAWQA project, the USGS also has collected long-term water-quality data to support additional assessments of changing water-quality conditions. These data have been combined to provide insight into how natural features and human activities have contributed...
thumbnail
In August 2015, water velocities around a fully-loaded commercial barge tow were measured as the barge tow traveled upstream through the Chicago Sanitary and Ship Canal from a starting position in Lockport Pool, and passed through the Electric Dispersal Barrier System at river mile (RM) 296 near Romeoville, IL. Velocity measurements were made in and alongside the gap formed by the junction between the boxed stern of a rake hopper barge and the raked bow of a rake tanker barge (herein referred to as the rake-to-box junction gap) using two SonTek Argonaut SW 3kHz acoustic Doppler velocity meters (ADVM). One ADVM was mounted 0.091 meters below the water surface, facing downward in the center of the rake-to-box junction...
thumbnail
A bathymetric survey of DeQueen Lake, Sevier County, Arkansas was conducted in July, 2015, by the Lower Mississippi-Gulf Water Science Center of the U.S. Geological Survey (USGS) using methodologies for multi-beam sonar surveys similar to those described by Lee, K.G. (2013) and Huizinga (2016). Data from the bathymetric survey were merged with data from an aerial LiDAR survey conducted in March, 2008 for the U.S. Army Corps of Engineers, Little Rock District and from the combined XYZ dataset, a digital terrain model (DTM) of the lakebed below flood pool elevation 474 feet above the North American Vertical Datum of 1988 (NAVD88) was created. Products derived from the DTM include a digital elevation model (DEM) in...
thumbnail
This tabular data set represents the STATSGO Soil Layer Attributes compiled for two spatial components of the NHDPlus version 2 data suite (NHDPlusv2) for the conterminous United States; 1) individual reach catchments and 2) reach catchments accumulated upstream through the river network. The source data is found in the LAYER table from the "STATSGO soil characteristics for the conterminous United States" produced by the United States Geological Survey (Wolock, 1997). The variables included are water-table depth, soil erodibility (k-fact), soil erodibility for the uppermost soil horizon (k-factup), permeability, average water capacity, bulk density, percent organic material, rainfall and runoff factor ("R factor"...
thumbnail
Ecological assessment data from the USGS National Water-Quality Assessment Program and the USEPA National River and Stream Assessment were reviewed and records were retained from sampling sites co-located with active USGS stream gages. A limited amount of ancillary data, including location, physical watershed features, and basic water chemistry data for each site were also retained.
thumbnail
This data release contains inputs for and outputs from hydrologic simulations of the Apalachicola-Chattahoochee-Flint River Basin (ACFB) in the southeastern U.S. using the Precipitation Runoff Modeling System (PRMS). Seven hydrologic models, one coarse-resolution model for the entire ACFB and six fine-resolution models of tributary sub-basins. These simulations were developed to provide estimates of water availability and statistics of streamflow. These PRMS model input and output data are intended to accompany a U.S. Geological Survey Scientific Investigations Report (LaFontaine and others, 2017); they include three types of data: 1) PRMS input parameter and data files, 2) PRMS output data files, and 3) GIS files...
thumbnail
Smelter slag containing copper and other trace elements is widespread in riverbed sediment of the upper Columbia River (UCR) of the United States. To evaluate potential risk to aquatic life concentrations of copper and other trace elements were measured in shallow pore-water and in river water samples collected near the sediment-water interface. Samples were collected using an in-situ pore-water profiler to collect a suite of four water samples from above, at, and below the sediment-water interface at each of 29 sampling locations; pore-water collected with a drive-point sampler at 10 additional locations; and Stabilized Liquid Membrane Device samplers (SLMDs) to allow determination of trace-element concentrations...
thumbnail
River bathymetry and stream velocity measurements were collected in March 2015 along the upper Willamette River, Oregon, between Eugene and Corvallis. These surveys were collected over a small range of discharges using a real time kinematic global positioning system (RTK-GPS) and acoustic Doppler current profiler (ADCP) on a motorboat while transecting at various cross sections along the river. These datasets were collected for equipment calibration and validation for the National Aeronautics and Space Administration’s (NASA) Surface Water and Ocean Topography (SWOT) satellite mission. This is one of multiple survey datasets that will be released for this effort.
thumbnail
This dataset describes the storm event mean concentrations and loads of total and dissolved forms of phosphorus and nitrogen from paired samples collected in the control and test catchment during the calibration and treatment phase of a leaf removal study in Madison, Wisconsin, USA. Samples were collected in spring 2013 through fall 2015 and are parsed by season where spring represents April – May, summer represents June – September and fall represents October – November. Measured weather parameters for each sampled storm event are also described. These data are interpreted in a journal article published in Science of the Total Environment.
thumbnail
The U.S. Geological Survey (USGS) and the National Park Service (NPS) have collaborated on monitoring the chloride flux in the major rivers of Yellowstone National Park by periodically sampling the rivers and analyzing chloride concentrations in discrete water samples since the 1970's. However, restrictions of winter travel, great distances between sites, and sampling and analytical costs have limited collection to approximately 28 samples per site annually. Electrical conductivity data can be used as a proxy for chloride concentrations in many of the major rivers of Yellowstone National Park. Electrical conductivity is a measure of the ability of water to pass an electrical current, and it is affected by the presence...


map background search result map search result map Geophysical Data from the 2014 Minute 319 Pulse Flow in the Colorado River Delta Model Archive of Pahute Mesa-Oasis Valley Groundwater Flow Model Electrical Conductivity Data for the Snake River, Yellowstone National Park and Grand Teton National Park Hydroacoustic measurements of velocities in and near the rake-to-box junction gap of a moving, fully-loaded commercial barge tow Attributes for NHDPlus Version 2.1 Reach Catchments and Modified Routed Upstream Watersheds for the Conterminous United States: STATSGO Soil Characteristics, Layer Attributes Trace elements concentrations in pore water and surface water near the sediment-water interface in the Upper Columbia River, Washington (2015) National 1-kilometer rasters of selected Census of Agriculture statistics allocated to land use for the time period 1950 to 2012 Concentration of total and dissolved forms of phosphorus and nitrogen from the control and test catchment during the calibration and treatment phase in Madison, WI (2013 - 2015) Pesticide concentration and streamflow datasets used to evaluate pesticide trends in the Nation’s rivers and streams, 1992-2012 Bathymetric survey of the Brandon Road Dam Spillway, Joliet, Illinois Geospatial Bathymetry Dataset and Elevation-Area-Capacity Table for Neversink Reservoir, 2014 Boat-based river bathymetry and stream velocity on the upper Willamette River, Oregon, Spring 2015 Water surface elevations recorded by submerged pressure transducers along the upper Willamette River, Oregon, Spring, 2015 Catchment-flowline network and selected model inputs for an enhanced and updated spatially referenced statistical assessment of dissolved-solids load sources and transport in streams of the Upper Colorado River Basin Bathymetry and Storage Capacity of DeQueen Lake, Sevier County, Arkansas, 2015. Model Input and Output for Hydrologic Simulations of the Apalachicola-Chattahoochee-Flint River Basin using the Precipitation Runoff Modeling System Water surface elevations recorded by submerged water level loggers in off-channel features of the middle and upper Willamette River, Oregon, Summer, 2016 Water Balance Model Inputs and Outputs for the Conterminous United States, 1900-2015 Matched ecological assessment and stream gaging data for the CONUS Acoustic Doppler current profiler velocity and discharge measurements collected in and near the lock chamber of Brandon Road Lock and Dam, Joliet, Illinois, USA in December 2014 Acoustic Doppler current profiler velocity and discharge measurements collected in and near the lock chamber of Brandon Road Lock and Dam, Joliet, Illinois, USA in December 2014 Bathymetric survey of the Brandon Road Dam Spillway, Joliet, Illinois Hydroacoustic measurements of velocities in and near the rake-to-box junction gap of a moving, fully-loaded commercial barge tow Concentration of total and dissolved forms of phosphorus and nitrogen from the control and test catchment during the calibration and treatment phase in Madison, WI (2013 - 2015) Geospatial Bathymetry Dataset and Elevation-Area-Capacity Table for Neversink Reservoir, 2014 Bathymetry and Storage Capacity of DeQueen Lake, Sevier County, Arkansas, 2015. Geophysical Data from the 2014 Minute 319 Pulse Flow in the Colorado River Delta Water surface elevations recorded by submerged water level loggers in off-channel features of the middle and upper Willamette River, Oregon, Summer, 2016 Trace elements concentrations in pore water and surface water near the sediment-water interface in the Upper Columbia River, Washington (2015) Model Archive of Pahute Mesa-Oasis Valley Groundwater Flow Model Model Input and Output for Hydrologic Simulations of the Apalachicola-Chattahoochee-Flint River Basin using the Precipitation Runoff Modeling System Catchment-flowline network and selected model inputs for an enhanced and updated spatially referenced statistical assessment of dissolved-solids load sources and transport in streams of the Upper Colorado River Basin Pesticide concentration and streamflow datasets used to evaluate pesticide trends in the Nation’s rivers and streams, 1992-2012 Matched ecological assessment and stream gaging data for the CONUS Water Balance Model Inputs and Outputs for the Conterminous United States, 1900-2015 National 1-kilometer rasters of selected Census of Agriculture statistics allocated to land use for the time period 1950 to 2012 Attributes for NHDPlus Version 2.1 Reach Catchments and Modified Routed Upstream Watersheds for the Conterminous United States: STATSGO Soil Characteristics, Layer Attributes