Filters: Categories: pre-SM502.8 (X) > partyWithName: U.S. Geological Survey, Central Energy Resources Science Center (X) > partyWithName: U.S. Geological Survey - CERSC Data Management Services Project (X) > partyWithName: Central Energy Resources Science Center (X)
8 results (11ms)
Filters
Date Range
Extensions Types Contacts
Categories Tag Types Tag Schemes |
Petroleum production data are usually stored in a format that makes it easy to determine the year and month production started, if there are any breaks, and when production ends. However, in some cases, you may want to compare production runs where the start of production for all wells starts at month one regardless of the year the wells started producing. This report describes the JAVA program the U.S. Geological Survey developed to examine water-to-oil and water-to-gas ratios in the form of month one, month two, and so on with the objective of estimating quantities of water and proppant used in low-permeability petroleum production. The text covers the data used by the program, the challenges with production data,...
Categories: Data,
pre-SM502.8;
Tags: USGS Science Data Catalog (SDC),
Water Assessment,
data cleaning,
source code,
water-to-gas ratio,
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown herein as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Appalachian Basin,
Assessment Unit,
Chattanooga Plateau Shale Gas,
Chattanooga Plateau Shale Oil,
Continuous Assessment Unit,
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown herein as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
Categories: Data,
pre-SM502.8;
Tags: Assessment Unit,
Continuous Assessment Unit,
Energy Resources,
Geology,
National Assessment of Oil and Gas,
The hydrogen index (HI) is a parameter obtained from Rock-Eval data which reflects general hydrocarbon generation and maturation trends in petroleum systems. In the Mississippian Barnett Shale, the hydrogen index was used to map general boundaries between regions of oil and gas generation within the extents of the formation. Hydrogen index values were obtained via Rock-Eval analyses of Barnett Shale core samples. In this system, HI values greater than 100 represent primarily oil generation and HI values less than 100 represent primarily gas generation. Secondary gas generation is indicated by HI values less than 50. In addition, the 100 HI line was utilized to establish part of the assessment unit (AU) boundaries...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Assessment Unit,
Barnett Continuous Gas,
Barnett Mixed Continuous Gas and Oil,
Continuous Assessment Unit,
Earth Science,
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown herein as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Anahuac Formation Slope Sandstones,
Assessment Unit,
Continuous Assessment Unit,
Energy Resources,
Frio Group Slope Sandstones,
https://energy.usgs.gov/OilGas/AssessmentsData/NationalOilGasAssessment.aspx.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Biogenic Gas,
Earth Science,
Economic geology,
Energy Resources,
Gas,
The boundaries illustrated by these Assessment Units are the result of geologic studies conducted by the World Petroleum Resources Project, 2009-2011 (Project). The boundaries were used to assess the oil and gas resources within the unit. An assessment unit, as defined by the Project, is a mapped volume of rock within the Total Petroleum System (TPS), sufficiently homogeneous in terms of geology, exploration strategy and risk characteristics to constitute a single population of discovered and undiscovered fields with respect to criteria used for resource assessment. Relatedly, the TPS is the essential elements and processes, as well as all genetically related hydrocarbons that occur in petroleum shows, seeps and...
Categories: Data,
pre-SM502.8;
Tags: Afghan-Tajik Basin,
Alberta Basin,
Amazonas Basin,
Amu-Darya Basin,
Anah Graben,
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown herein as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Assessment Unit,
Barnett Continuous Gas,
Barnett Mixed Continuous Gas and Oil,
Continuous Assessment Unit,
Earth Science,
|
|