Filters: Types: Shapefile (X) > partyWithName: Energy and Minerals (X)
678 results (12ms)|
Filters
Date Range
Extensions Types Contacts
Categories Tag Types
|
The Apparent Wilcox Group thickness maps are contoured from location and top information derived from the Petroleum Information (PI) Wells database. The Wilcox apparent thickness map was constructed by searching for Wilcox and Midway Group tops. Apparent thickness is computed by subtracting Midway top from the Wilcox top. Geographic control is superimposed on the maps from USGS state line, county, elevation and other data files. The veracity of the PI Wells database is being checked by comparison to published cross sections and geologic maps. Interpretation of the depth to Wilcox and apparent thickness maps along with published measured sections and cross sections indicates that portions of Texas, Louisiana, Mississippi...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 47 = Western Gulf,
48 = East Texas Basin,
49 = Louisiana-Mississippi Salt Basins,
50 = Florida Peninsula,
AL,
Cell maps for each oil and gas assessment unit were created by the USGS to illustrate the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were...
Cell maps for each oil and gas assessment unit were created by the USGS as a method for illustrating the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 506501 = Chattanooga Shale/Floyd Shale-Paleozoic,
50650101 = Pre-Mississippian Carbonates Gas,
50650102 = Carboniferous Sandstones Oil and Gas,
506502 = Pottsville Coal,
50650281 = Black Warrior Basin Coalbed Gas,
Drilling-density cell maps show the number of wells that have been drilled into the storage assessment unit (SAU). Each 1-square-mile cell has a count for the number of unique well boreholes drilled into the SAU. For a given sedimentary basin, the USGS National Geologic CO2 Sequestration Assessment Project identifies SAUs containing the potential for storage and sequestration of carbon dioxide. Proprietary well header data from IHS ENERDEQ through 2010 were queried to determine which wells were drilled into specific SAUs. The coordinates of wells are proprietary and cannot be released; however, counts of the number of wells per square mile are presented in the well drilling density data layer.
This is a polygon coverage of the structure contours of the Calico sequence boundary in the Kaiparowits Plateau, southern Utah. Sequence boundary elevations are based on 166 drill sites. The Calico sequence boundary occurs from 50-100 ft below the base of the John Henry Member, therefore an inferred elevation of the sequence boundary was used at numerous locations along the outcrop where the John Henry Member was mapped. The outside polygon defines the base of the coal-bearing Calico and A-sequences of the Straight Cliffs Formation east of 112 degrees of longitude. The northern boundary is delineated by the Paunsaugunt fault and volcanic rocks of Tertiary age.
These are shapefiles and ARC/INFO polygon coverages showing the isopachs of total net coal in beds greater than or equal to 1.2' thick for the A through G coal zones, Danforth Hills coal field. The coverage danathkg is the isopach coverage for the A coal zone; danbthkg is for the B coal zone, and so on.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Colorado,
Colorado Plateau,
Colorado Plateau,
Colorado Plateau coal assessment study area,
Danforth Hills,
Net coal thickness isopachs, Ferris 23, 25, 31, 50 and 65 coal zones, Hanna Basin Wyoming (fer*catg)
These ArcView shapefiles contain representations of the net coal thickness in the Ferris 23, 25, 31, 50 and 65 coal zones in the Ferris coalfield, Hanna Basin, Wyoming. These datasets were created specifically for the National Coal Resource Assessment in the Northern Rocky Mountains and Great Plains Region.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Carbon County,
Coal,
Coal thickness,
Ferris 23 coal zone,
Ferris 23 study limit,
These ArcView shapefiles contain representations of the Hanna coal zone study limit boundaries in the Hanna coalfield, Hanna Basin, Wyoming. These shapefiles were created specifically for the National Coal Resource Assessment in the Northern Rocky Mountains and Great Plains Region.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Boundary,
Carbon County,
Coal,
Hanna 77 coal zone,
Hanna 77 study limit,
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
National Assessment of Oil and Gas Project - Wind River Basin Province (035) Total Petroleum Systems
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
These are shapefiles and coverages of final unioned polygon coverages used to calculate coal resources of the Cameo/Fairfield coal group east of 107 deg 15' longitude, and the Cameo/Wheeler, South Canyon, and Coal Ridge coal zones west of 107 deg 15' longitude in the southern Piceance Basin, northwestern Colorado. Pscbfing was used for the area east of 107 deg 15' longitude; pscwfing was used for the Cameo/Wheeler coal zone; psscfing was used for the South Canyon coal zone; pscrfing was used for the Coal Ridge coal zone. Polygons that make up the final unioned polygons include counties, 7.5' quadrangles, townships, surface and coal ownership, reliability, and, overburden. The final unioned coverage for each coal...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Colorado,
Colorado Plateau,
Colorado Plateau,
Crested Butte,
National Coal Resource Assessment (NCRA),
National Assessment of Oil and Gas Project - Sacramento Basin Province (009) Total Petroleum Systems
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 500901 = Dobbins-Forbes,
50090101 = Forbes, Kione and Older,
50090102 = Lower Princeton Canyon Fill and Northern Nonmarine,
500902 = Winters-Domengine,
50090201 = Late Cretaceous Deltaic and Submarine Fan,
The digitally compiled map includes geology, oil and gas field centerpoints, and geologic provinces of the Arctic (North Pole area encircled by 640 N Latitude). The GIS data sets were designed originally in ESRI's ARC/INFO ver. 8.0.1 and were published as part of a series of interim CD-ROM products of the U.S. Geological Survey's World Energy Project (WEP). The goal of the WEP is to assess the undiscovered, technically recoverable oil and gas resources of the world. Results of this assessment were reported in the year 2000 (see USGS DDS-60; http://pubs.usgs.gov/dds/dds-060/).
This coverage includes arcs and arc labels that hold the Bouguer Gravity anomaly value for contours and type contours of the original map of Bangladesh with the same name.
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Anomaly,
Bangladesh,
Digital map,
Earth Science,
Ganges-Brahmaputra Delta, Province 8047,
This coverage includes arcs, polygons, and polygon labels that describe the generalized geologic age of surface outcrops of bedrock of Svalbard. It also includes shorelines.
Thirty-four ore, twenty-nine mine waste, seven host rock, two pegmatite, and one slag sample were collected from iron oxide-apatite (IOA) mines in the eastern Adirondack Highlands near Mineville and Ticonderoga, New York, from March 2016 to August 2018. The waste pile samples included twenty-five samples collected from rubble-sized mine waste piles and four samples from processed tailings piles. The ore from historic iron mines of the eastern Adirondack Highlands, New York, contain abundant quantities of rare earth element (REE)-bearing apatite crystals. These apatite crystals are especially enriched in Y, La, Ce, and Nd. In-ground ore, mine waste piles, and tailings piles could contain apatite...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Adirondack Mountains,
Energy Resources,
Geochemistry,
ICP-MS,
ICP-OES,
In December of 2018, the U.S. Geological Survey (USGS) signed a Technical Assistance Agreement with a third party to reanalyze 2,324 archived sample splits collected as part of the National Uranium Resource Evaluation (NURE) Hydrogeochemical and Stream Sediment Reconnaissance (HSSR) project from selected areas in Idaho and Montana. A small amount (approximately 0.25 grams [g]) of sieved <75-micron sample material was retrieved from the USGS National Geochemical Sample Archive for geochemical analysis. These samples were analyzed for 48 elements by ALS Global laboratories using their ultra-trace four-acid-digestion dual-mode inductively coupled plasma mass spectrometry (ICPMS) (ALS ME-MS61L) method (Ag, Al, As, Ba,...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Benewah,
Benewah County, Idaho,
Bonner County, Idaho,
Boundary County, Idaho,
Flathead County, Montana,
The U.S. Geological Survey (USGS) has collected or incorporated over 20,000 physical property measurements into an ASCII database. These data are primarily from the western U.S. and Alaska and are dominated by granitic rock samples from the Sierra Nevada (compiled by Sikora and others, 1991), but also include a range of other commonly found rocks types. The data include density, magnetic susceptibility, and in some cases, remanent magnetic properties. Density data for more recently collected samples include grain, dry-bulk, and saturated-bulk density measurements. Sample locations are in the North American Datum of 1927 (NAD27) and elevations are in the National Geodetic Vertical Datum of 1929 (NGVD29). These physical...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Density,
Geophysical studies,
Geophysics,
Magnetic properties,
Physical Properties,
The Geochemical Database for Iron Oxide-Copper-Cobalt-Gold-Rare Earth Element Deposits of Southeast Missouri (IOCG-REE_GX) contains new geochemical data compilations for samples from IOCG-REE type deposits in which each rock sample has one "best value" determination for each analyzed species, greatly improving speed and efficiency of use. IOCG-REE_GX was created and designed to compile whole-rock and trace element data from southeast Missouri in order to facilitate petrologic studies, mineral resource assessments, and the definition and statistics of geochemical baseline values. This relational database serves as a data archive in support of present and future geologic and geochemical studies of IOCG-REE type deposits,...
Categories: Data,
Data Release - Revised;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Boss-Bixby deposit,
Bourbon deposit,
Camel's Hump deposit,
Carter County,
Cedar Hill deposit,
Airborne electromagnetic (AEM) and magnetic survey data were collected during October 2014 in a 553-square-kilometer area that includes the East Poplar oil field on the Fort Peck Indian Reservation in northeastern Montana, USA. Data surround the city of Poplar and extend south into the Missouri River floodplain. Data were acquired with the SkyTEM301 transient electromagnetic helicopter-borne system together with a Geometrics G-822 magnetometer. The AEM average depth of investigation is about 80 m. The survey was flown at a nominal flight height of 30 m above terrain along north-south oriented flight lines; the majority of lines had a nominal spacing of 200 m with a sub-block area in the central portion of the oil...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: CGGSC,
City of Poplar,
Crustal Geophysics and Geochemistry Science Center,
East Poplar Oil Field,
Energy Resources Program,
|
|
