Filters: partyWithName: Central Energy Resources Science Center (X) > partyWithName: U. S. Geological Survey, Central Energy Resources Team (X)
133 results (60ms)
Filters
Date Range
Extensions Types Contacts
Categories Tag Types Tag Schemes
|
The USGS Central Region Energy Team assesses oil and gas resources of the United States. The onshore and State water areas of the United States comprise 71 provinces. Within these provinces, Total Petroleum Systems are defined and Assessment Units are defined and assessed. Each of these provinces is defined geologically, and most province boundaries are defined by major geologic changes. The Bend Arch-Fort Worth Basin Province is located in north central Texas and south western Oklahoma, encompassing all or parts of Archer, Bandera, Baylor, Blanco, Bosque, Brown, Burnet, Callahan Clay, Coleman, Collin, Comanche, Concho, Cooke, Coryell, Dallas, Denton, Eastland, Ellis, Erath, Foard, Gillespie, Grayson, Hardeman,...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 45 = Bend Arch-Fort Worth Basin,
504501 = Barnett Paleozoic,
50450101 = Paleozoic Shelf and Bank Carbonate Oil and Gas,
50450102 = Mississippian Chappel Pinnacle Reef Oil and Gas,
50450161 = Greater Newark East Frac-Barrier Continuous Barnett Shale Gas,
Regions of high or low potential for oil and gas resources in the Powder River Basin generally indicate where continuous oil and gas resources are more or less likely to be found. These regions are based on several kinds of structural features that were plotted using a Geographic Information System (GIS) and drawn on a map by an assessment geologist. Structural features include faults, anticlines, synclines, and lineaments which may: 1) enhance secondary reservoir permeability and 2) provide migration pathways in unconventional rocks.
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 503301 = Tertiary-Upper Cretaceous Coalbed Methane,
50330101 = Eastern Basin Margin Upper Fort Union Sandstone,
50330181 = Wasatch Formation,
50330182 = Upper Fort Union Formation,
50330183 = Lower Fort Union-Lance Formations,
Cell maps for each oil and gas assessment unit were created by the USGS to illustrate the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 500501 = Cretaceous-Tertiary Composite,
50050101 = Eastern Oregon and Washington Conventional Gas,
50050102 = Republic Graben Gas,
50050161 = Columbia Basin Continuous Gas,
Assessment Unit,
This dataset shows depth contours to the top of the Mesaverde Group within the Southwestern Wyoming Province, southwestern Wyoming, northeastern Utah, and northwestern Colorado
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 503701 = Phosphoria Total Petroleum System,
50370101 = Sub-Cretaceous Conventional Oil and Gas,
503702 = Mowry Composite Total Petroleum System,
50370201 = Mowry Conventional Oil and Gas,
50370261 = Mowry Continuous Gas,
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 502701 = Thrust Belt Paleozoic/Mesozoic Composite,
50270101 = Thrust Belt Conventional Gas and Oil,
50270102 = Sawtooth Range Structure Conventional Oil and Gas,
50270103 = Frontal Structures Conventional Oil and Gas,
502702 = Central Montana Trough Paleozoic Composite,
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 506501 = Chattanooga Shale/Floyd Shale-Paleozoic,
50650101 = Pre-Mississippian Carbonates Gas,
50650102 = Carboniferous Sandstones Oil and Gas,
506502 = Pottsville Coal,
50650281 = Black Warrior Basin Coalbed Gas,
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
This dataset comprises a collection of tabular data and graphical images supporting the U.S. Geological Survey's National Oil and Gas Assessment (NOGA) for Appalachian Basin Province (067). The dataset includes detailed information on crude oil and natural gas production, including volumetric and descriptive data such as cumulative production, remaining reserves, and known recoverable volumes. Historical data covering field-discovery dates, well completion dates, exploration objectives, and well depths are also provided. Data sources include commercial databases along with supplemental information from various federal and state agencies. No proprietary data is included in this. The dataset is presented in multiple...
Categories: Data,
pre-SM502.8;
Tags: Energy Resources,
National and Global Assessment Oil and Gas,
Natural Gas,
Oil,
USGS Science Data Catalog (SDC),
Cell maps for each oil and gas assessment unit were created by the USGS to illustrate the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells were then coded to indicate whether the wells included within the cell are predominantly oil-producing, gas-producing, are both oil- and gas-producing, or are dry or the type of production is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic...
The USGS Central Region Energy Team assesses oil and gas resources of the United States. The onshore and State water areas of the United States comprise 71 provinces. Within these provinces, Total Petroleum Systems are defined and Assessment Units are defined and assessed. Each of these provinces is defined geologically, and most province boundaries are defined by major geologic changes. The Williston Basin Province is located in North Dakota, eastern Montana, and northwestern South Dakota, encompassing all or parts of Divide, Burke, Renville, Bottineau, Rolette, Towner, Cavalier, Pembina, Walsh, Grand Forks, Nelson, Ramsey, Benson, Eddy, Foster, Wells, Griggs, Steele, Traill, Cass, Barnes, Ransom, Richland, Sergeant,...
The Positive Structural Elements coverage maps, in the form of polygons, are known structural highs within the province that commonly define a basin proper or influence the occurrence of discovered or undiscovered hydrocarbon accumulations. Positive Structural Elements are shown here as geographic polygons that were only generally defined and mapped by the geologist responsible for the province. These Positive Structural Elements were mapped mostly from other resources, including previously published maps and literature (see Pollastro and Viger, 1998, in text portion of publication DDS-69-A). The Positive Structural Elements boundaries were defined in the period from March to May, 2000.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Coalbed methane resources,
Earth Science,
Economic geology,
Energy Resources,
FL,
This dataset shows depth contours to the top of the Frontier Formation within the Southwestern Wyoming Province, southwestern Wyoming, northeastern Utah, and northwestern Colorado.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 503701 = Phosphoria Total Petroleum System,
50370101 = Sub-Cretaceous Conventional Oil and Gas,
503702 = Mowry Composite Total Petroleum System,
50370201 = Mowry Conventional Oil and Gas,
50370261 = Mowry Continuous Gas,
Cell maps for each oil and gas assessment unit were created by the USGS as a method for illustrating the degree of exploration, type of production, and distribution of production in an assessment unit or province. A cell map was not created for the Menefee Coal-Bed Gas (50220381) assessment unit because it was considered a hypothetical assessment unit. The Mesaverde Updip oil had production wells associated with it but resource totals were below the minimum and wasn't quantitatively assessed. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry,...
Cell maps for each oil and gas assessment unit were created by the USGS to illustrate the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells were then coded to indicate whether the wells included within the cell are predominantly oil-producing, gas-producing, are both oil- and gas-producing , or are dry or the type of production is unknown.. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 506401 = Precambrian to Cambrian,
50640101 = Precambrian to Cambrian Rift-Fill,
50640102 = Cambrian Mount Simon to Eau Claire,
50640103 = Cambrian to Ordovician Knox Group,
506402 = Ordovician Ancell Maquoketa,
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 45 = Bend Arch-Ft. Worth Basin,
504501 = Barnett Paleozoic,
50450101 = Paleozoic Shelf and Bank Carbonate Oil and Gas,
50450102 = Mississippian Chappel Pinnacle Reef Oil and Gas,
50450161 = Greater Newark East Frac-Barrier Continuous Barnett Shale Gas,
|
|