Skip to main content
Advanced Search

Filters: partyWithName: Matthew K Landon (X) > Types: Map Service (X) > Types: OGC WMS Service (X)

19 results (9ms)   

View Results as: JSON ATOM CSV
thumbnail
The U.S. Geological Survey (USGS), in cooperation with the California State Water Resources Control Board (SWRCB), compiled Fall 2017 fluid level elevation data from idle oil and gas wells in the Oxnard Oil Field to estimate vertical hydraulic head difference between oil production and overlying groundwater aquifer zones. Fluid elevations came from two sources, measurements in idle oil and gas wells and groundwater elevations in water wells in the overlying aquifer estimated at the points of idle well measurements using geographic information system (GIS) procedures. The fluid elevations from idle oil and gas wells were compiled by the California Geologic Energy Management Division (CalGEM) as part of their Idle...
thumbnail
This digital data set contains total dissolved solids (either reported or calculated from specific conductance in lieu of reported total dissolved solids data), well construction, and well identifying information for 1,131 petroleum wells and 3,546 water wells used to map salinity in and around 31 southern and central California oil fields. The data set also includes ancillary data in the form of top perforation (petroleum wells), bottom perforation, well depth, or hole depth (water wells), land-surface elevation at the well head, and well location and identifier information. For petroleum wells missing top perforation depth (3 percent), the median top perforation depth for all wells within the field having top...
thumbnail
The U.S. Geological Survey (USGS) in cooperation with the California State Water Resources Control Board and Bureau of Land Management compiled and analyzed data for mapping groundwater salinity in selected oil and gas fields in California. The data for the South Cuyama oil field includes well construction data, digitized borehole geophysical data, geochemical analyses of water samples from oil and gas wells and groundwater wells, geological formation depths, and the groundwater total dissolved solids (TDS) calculations. These data have been compiled from many sources and span several decades. The well construction data includes attributes such as the date drilling began (spud date), borehole orientation, well depth...
thumbnail
This digital dataset includes 580 samples from 12 groundwater wells and 45 samples of produced water from 38 sites (including 17 wells) located within 3 miles of the Placerita and Newhall Oil Fields in Los Angeles County, southern California. Historical geochemistry data were compiled from multiple data sources for selected water-quality indicators, major and minor ions, nutrients, trace elements, dissolved organic carbon, hydrocarbons, naturally occurring radioactive material, tracers, semi-volatile organic compounds, volatile organic compounds, organic acids, and other miscellaneous organic compounds. Ancillary data in the form of top perforation or top of sample interval (petroleum wells), bottom perforation...
thumbnail
As part of the California State Water Resources Control Board’s Oil and Gas Regional Monitoring Program , the U.S. Geological Survey collected groundwater and quality-control (QC) samples during September 2016–February 2017 from 14 water-production wells located within a one-mile buffer zone of and in the Fruitvale Oil field, Kern County, California. Samples were analyzed for water-quality indicators, major and minor ions, nutrients, trace elements, volatile organic compounds, naturally occurring radioactive material, geochemical and age-dating tracers, dissolved organic carbon, dissolved standard and hydrocarbon gases, and dissolved noble and atmospheric gases. In total, 235 constituents and water-quality indicators...
thumbnail
This digital dataset includes 255 samples from 41 groundwater wells and 271 samples of produced water from 143 sites (including 101 wells) located within 3 miles of the San Ardo Oil Field in Monterey County, central California. Historical geochemistry data were compiled from multiple data sources for selected water-quality indicators, major and minor ions, nutrients, and trace elements. Ancillary data in the form of top perforation or top of sample interval (petroleum wells), bottom perforation or bottom of sample interval (petroleum wells), well depth, or hole depth (water wells), land-surface (water wells) or reference point (petroleum wells) elevation at the well head, well location, and identifier information...
thumbnail
In cooperation with the California State Water Resources Control Board’s oil and gas Regional Monitoring Program, the U.S. Geological Survey collected and analyzed groundwater and associated quality control (QC) samples during June 2017 – August 2017. Groundwater samples were collected from one public supply well, four monitoring wells, and nine irrigation wells located within a three- mile buffer zone overlying and surrounding the Oxnard oil field administrative boundary in Ventura County, California. Samples were collected using established groundwater data-collection protocols and procedures. Samples were analyzed for water-quality indicators, major and minor ions, nutrients, trace elements, volatile organic...
thumbnail
Airborne electromagnetic (AEM) and magnetic survey data were collected during October 2016 along 1,443 line kilometers in the southwestern San Joaquin Valley near Lost Hills, California. These data were collected in support of groundwater salinity mapping and hydrogeologic framework development as part of the U.S. Geological Survey California Oil, Gas, and Groundwater program and the California State Water Resources Control Board’s Program of Regional Monitoring of Water Quality in Areas of Oil and Gas Production. Minimally processed binary AEM data received from the contractor were imported into the Aarhus Workbench software (Aarhus Geosoftware, Aarhus, Denmark) and processed. Filters were applied to inclinometer...
thumbnail
Airborne electromagnetic (AEM) and magnetic survey data were collected during October 2016 along 1,443 line kilometers in the southwestern San Joaquin Valley near Lost Hills, California. These data were collected in support of groundwater salinity mapping and hydrogeologic framework development as part of the U.S. Geological Survey California Oil, Gas, and Groundwater program and the California State Water Resources Control Board’s Program of Regional Monitoring of Water Quality in Areas of Oil and Gas Production. Data were acquired by SkyTEM ApS with the SkyTEM 312 time-domain helicopter-borne electromagnetic system together with a Geometrics G822A cesium vapor magnetometer. The survey was designed to cover the...
thumbnail
This dataset contains geochemical and other information for 204 samples of produced water from the Fruitvale petroleum field. Produced water is water coexisting with oil and gas. The historical produced water chemistry data was compiled from preexisting datasets and scanned images into a numerical dataset to characterize produced water chemical characteristics. Each sample is identified by its API (American Petroleum Institute) number, excluding the state code, which is 04 in all California wells, latitude and longitude, well name, formation name, perforation interval, and date tested. The geochemical analyses include major ions, some minor ions, total dissolved solids (TDS), pH, specific gravity, resistivity, electrical...
thumbnail
This digital dataset contains historical geochemical and other information for 255 samples of groundwater from 41 wells located within 3-miles of the San Ardo Oil Field in Monterey County, central California. Data were compiled from preexisting datasets into two separate data files described as follows: 1) a summary data file identifying each well, it's location, basic well construction, the number of chemistry samples and period of record, and data sources; and 2) a data file of geochemistry analyses for selected water-quality indicators, major and minor ions, nutrients, and trace elements, plus parameter code and (or) method, reporting level, reporting level type, and supplemental notes. A data dictionary was...
thumbnail
This digital dataset contains historical geochemical and other information for 271 samples of produced water from 143 sites in or near the San Ardo Oil Field in Monterey County, central California. Produced water is a term used in the oil industry to describe water that is produced from oil wells as a byproduct along with the oil and gas. The locations from which these historical samples have been collected include 101 wells; three wells (DataSet_ID 118 ,125, and 130) are located outside of the administrative boundary, but closer to San Ardo (within 3 miles) than any other oil field, and therefore they were included in this dataset. Well depth and (or) perforation depths are available for 91 of these wells. Sample...
thumbnail
Airborne electromagnetic (AEM) and magnetic survey data were collected during October 2016 along 1,443 line kilometers in the southwestern San Joaquin Valley near Lost Hills, California. These data were collected in support of groundwater salinity mapping and hydrogeologic framework development as part of the U.S. Geological Survey California Oil, Gas, and Groundwater program and the California State Water Resources Control Board’s Program of Regional Monitoring of Water Quality in Areas of Oil and Gas Production. Deterministic laterally constrained inversions of the processed airborne electromagnetic data were developed using the AarhusINV code implemented in Aarhus Workbench software. Inversion parameters were...
thumbnail
To determine aquifer characteristics, pneumatic slug tests were performed on selected zones and aquifers at a monitoring site near the Lost Hills oil field in the Southern San Joaquin Valley in Kern County. On May 30th and 31st, 2018, pneumatic slug tests were performed at five monitoring wells located at the multiple-well groundwater-monitoring site LHSP (26S/21E-07J1 through –J5) near Lost Hills, CA in the Southern San Joaquin Valley. Data were collected using In-Situ LevelTROLL 500 30psig pressure transducers set to record the depth to water level below land surface at one second intervals. Computations were performed using Aqtesolv software and analyzed using the KGS Model package for overdamped slug tests performed...
thumbnail
Airborne electromagnetic (AEM) and magnetic survey data were collected during October 2016 along 1,443 line kilometers in the southwestern San Joaquin Valley near Lost Hills, California. These data were collected in support of groundwater salinity mapping and hydrogeologic framework development as part of the U.S. Geological Survey California Oil, Gas, and Groundwater program and the California State Water Resources Control Board’s Program of Regional Monitoring of Water Quality in Areas of Oil and Gas Production. Data were acquired by SkyTEM ApS with the SkyTEM 312 time-domain helicopter-borne electromagnetic system together with a Geometrics G822A cesium vapor magnetometer. The survey was flown at a nominal flight...
thumbnail
Note: This data release has been revised. The updated version is available here: https://doi.org/10.5066/P9DR22GD. As part of the California State Water Resources Control Board’s Regional Groundwater Monitoring Program of Water Quality in Areas of Oil and Gas Production, during September 2016–February 2017, the U.S. Geological Survey collected and analyzed groundwater and associated quality-control (QC) samples from 14 water-production wells located within a three mile buffer zone of and in the Fruitvale Oil field, Kern County, California. Samples were analyzed for water-quality indicators, major and minor ions, nutrients, trace elements, volatile organic compounds, naturally occurring radioactive material, geochemical...
thumbnail
The U.S. Geological Survey (USGS) and California State University-Sacramento, in cooperation with the California State Water Resources Control Board and U.S. Bureau of Land Management, compiled and analyzed data for mapping groundwater salinity in selected oil and gas fields in California. The data for the Midway-Sunset (MWSS) oil field includes digitized borehole geophysical data, geochemical analyses of produced water samples from oil and gas wells, core sample analysis from select wells, and groundwater total dissolved solids (TDS) estimations with the related geophysical log data. These data have been compiled from many sources and span several decades. The geochemical data include ion concentrations and TDS...
thumbnail
The U.S. Geological Survey (USGS) in cooperation with the California State Water Resources Control Board (SWRCB) compiled and digitized mud logs from oil and gas wells in the Oxnard Oil Field area. Scanned copies of the mud logs were downloaded from the California Geologic Energy Management Division (CalGEM) online data and were digitized. Thirteen available mud logs associated with the Pliocene Tar Sand pool code (Vaca Tar Sand) were digitized. Mud-logging technology (mud logs) allows for identification and relative concentration measurement in parts per million by volume (ppmv) of light hydrocarbon gases (methane through pentane) occurring in drilling mud returned to the surface throughout the drilling process...
thumbnail
The U.S. Geological Survey (USGS) in cooperation with the California State Water Resources Control Board compiled and analyzed data for mapping groundwater salinity and characterizing aquifer systems in and near selected oil and gas fields in California. Data for the Lost Hills, North Belridge, and South Belridge oil fields include production and injection volumes, oil show data, formation pressure data, digitized borehole geophysical data, geochemical analyses of produced water samples, geological formation depths, and geophysical data associated with estimating groundwater total dissolved solids (TDS) of formation water. All data reported here are used in an accompanying interpretive manuscript. These data have...


    map background search result map search result map Historical produced water chemistry data compiled for the Fruitvale Oilfield, Kern County, California Water and petroleum well data used for preliminary regional groundwater salinity mapping near selected oil fields in central and southern California Airborne electromagnetic and magnetic survey, southwestern San Joaquin Valley near Lost Hills, California, 2016 Water chemistry data for samples collected at groundwater sites near the Fruitvale oil field, September 2016–February 2017, Kern County, California Geological, geochemical, and geophysical data from the Lost Hills and Belridge oil fields Geophysical and geochemical data for salinity mapping in the Midway-Sunset oil field area Geochemical and geophysical data for selected wells in and surrounding the South Cuyama oil and gas field Minimally processed AEM and magnetic data Inverted resistivity models Aquifer test data for multiple-well monitoring site LHSP, Kern County, California Processed AEM data Mud logs from the Oxnard Oil Field, Ventura County, California Water chemistry data for samples collected at groundwater sites near the Oxnard oil field, June 2017–August 2017, Ventura County, California Fluid levels in the Oxnard Oil Field, Ventura County, California Water chemistry data for samples collected at groundwater sites near the Fruitvale oil field, September 2016–February 2017, Kern County, California (ver. 2.0, July 2020) Historical groundwater and produced water chemistry data compiled for the San Ardo Oil Field and vicinity, Monterey County, central California Historical groundwater chemistry data compiled for the San Ardo Oil Field and vicinity, Monterey County, central California Historical produced water chemistry data compiled for the San Ardo Oil Field and vicinity, Monterey County, central California Historical groundwater and produced water chemistry data compiled for the Placerita and Newhall Oil Fields, Los Angeles County, southern California Aquifer test data for multiple-well monitoring site LHSP, Kern County, California Fluid levels in the Oxnard Oil Field, Ventura County, California Water chemistry data for samples collected at groundwater sites near the Fruitvale oil field, September 2016–February 2017, Kern County, California (ver. 2.0, July 2020) Water chemistry data for samples collected at groundwater sites near the Fruitvale oil field, September 2016–February 2017, Kern County, California Historical produced water chemistry data compiled for the Fruitvale Oilfield, Kern County, California Water chemistry data for samples collected at groundwater sites near the Oxnard oil field, June 2017–August 2017, Ventura County, California Historical groundwater and produced water chemistry data compiled for the Placerita and Newhall Oil Fields, Los Angeles County, southern California Historical groundwater chemistry data compiled for the San Ardo Oil Field and vicinity, Monterey County, central California Historical produced water chemistry data compiled for the San Ardo Oil Field and vicinity, Monterey County, central California Geological, geochemical, and geophysical data from the Lost Hills and Belridge oil fields Geophysical and geochemical data for salinity mapping in the Midway-Sunset oil field area Geochemical and geophysical data for selected wells in and surrounding the South Cuyama oil and gas field Airborne electromagnetic and magnetic survey, southwestern San Joaquin Valley near Lost Hills, California, 2016 Minimally processed AEM and magnetic data Inverted resistivity models Processed AEM data Water and petroleum well data used for preliminary regional groundwater salinity mapping near selected oil fields in central and southern California Historical groundwater and produced water chemistry data compiled for the San Ardo Oil Field and vicinity, Monterey County, central California