Skip to main content
Advanced Search

Filters: Types: Downloadable (X) > Date Range: {"choice":"year"} (X) > partyWithName: U.S. Geological Survey (X) > Categories: pre-SM502.8 (X)

7 results (12ms)   

Filters
Date Types (for Date Range)
Extensions
Types
Contacts
Categories
Tag Types
Tag Schemes
View Results as: JSON ATOM CSV
thumbnail
The digitally compiled map includes geology, oil and gas field centerpoints, and geologic provinces of the Arctic (North Pole area encircled by 640 N Latitude). The GIS data sets were designed originally in ESRI's ARC/INFO ver. 8.0.1 and were published as part of a series of interim CD-ROM products of the U.S. Geological Survey's World Energy Project (WEP). The goal of the WEP is to assess the undiscovered, technically recoverable oil and gas resources of the world. Results of this assessment were reported in the year 2000 (see USGS DDS-60; http://pubs.usgs.gov/dds/dds-060/).
Categories: Data, pre-SM502.8; Types: Downloadable, Map Service, OGC WFS Layer, OGC WMS Layer, Shapefile; Tags: Admiralty Arch, Province 1061, Anabar Basin, Province 1200, Anabar-Olenek High, Province 1202, Anadyr Basin, Province 1300, Anzhu Uplift, Province 1255, All tags...
thumbnail
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown herein as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
Categories: Data, pre-SM502.8; Types: Downloadable, Map Service, OGC WFS Layer, OGC WMS Layer, Shapefile; Tags: Appalachian Basin, Assessment Unit, Chattanooga Plateau Shale Gas, Chattanooga Plateau Shale Oil, Continuous Assessment Unit, All tags...
thumbnail
The hydrogen index (HI) is a parameter obtained from Rock-Eval data which reflects general hydrocarbon generation and maturation trends in petroleum systems. In the Mississippian Barnett Shale, the hydrogen index was used to map general boundaries between regions of oil and gas generation within the extents of the formation. Hydrogen index values were obtained via Rock-Eval analyses of Barnett Shale core samples. In this system, HI values greater than 100 represent primarily oil generation and HI values less than 100 represent primarily gas generation. Secondary gas generation is indicated by HI values less than 50. In addition, the 100 HI line was utilized to establish part of the assessment unit (AU) boundaries...
thumbnail
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologists responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
Categories: Data, pre-SM502.8; Types: Downloadable, Map Service, OGC WFS Layer, OGC WMS Layer, Shapefile; Tags: 47 = Western Gulf, 504701 = Upper Cretaceous Tuscaloosa-Woodbine, 50470101 = Tuscaloosa Downdip Gas, 50470102 = Woodbine Downdip Gas, Assessment Unit, All tags...
thumbnail
Coalbed Methane wells are provided as a method for analysis and illustration of the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each point represents a well location and is symbolized as producing oil, gas, both oil and gas, or other (dry or unknown) using the status code in the attribute table. Data were provided by the Wyoming State Oil and Gas Conservation Commission. See supplemental information section for limitations and assumptions about data.
Categories: Data, pre-SM502.8; Types: Downloadable, Map Service, OGC WFS Layer, OGC WMS Layer, Shapefile; Tags: 503301 = Tertiary-Upper Cretaceous Coalbed Methane, 50330101 = Eastern Basin Margin Upper Fort Union Sandstone, 50330181 = Wasatch Formation, 50330182 = Upper Fort Union Formation, 50330183 = Lower Fort Union-Lance Formations, All tags...
thumbnail
Coalbed Methane wells are provided as a method for analysis and illustration of the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each point represents a well location and is symbolized as producing oil, gas, both oil and gas, or other (dry or unknown) using the status code in the attribute table. Data were provided by the Montana Board of Oil and Gas Conservation. See supplemental information section for limitations and assumptions about data.
Categories: Data, pre-SM502.8; Types: Downloadable, Map Service, OGC WFS Layer, OGC WMS Layer, Shapefile; Tags: 503301 = Tertiary-Upper Cretaceous Coalbed Methane, 50330101 = Eastern Basin Margin Upper Fort Union Sandstone, 50330181 = Wasatch Formation, 50330182 = Upper Fort Union Formation, 50330183 = Lower Fort Union-Lance Formations, All tags...
thumbnail
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown herein as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...


    map background search result map search result map USGS National and Global Oil and Gas Assessment Project - Sunbury and Chattanooga Shales Assessment Unit Boundaries and Assessment Input Forms USGS National Assessment of Oil and Gas Project - Mississippian Barnett Shale, Bend Arch-Fort Worth Basin Province Assessment Units USGS National Assessment of Oil and Gas Project - Hydrogen Index (HI), Bend Arch-Fort Worth Basin Province Assessment Units National Assessment of Oil and Gas Project - Powder River Basin Province (033) - Wyoming Coalbed Methane Wells National Assessment of Oil and Gas Project - Powder River Basin Province (033) - Montana Coalbed Methane Wells National Assessment of Oil and Gas Tuscaloosa and Woodbine Downdip Gas Assessment Units National Assessment of Oil and Gas Project - Powder River Basin Province (033) - Montana Coalbed Methane Wells USGS National Assessment of Oil and Gas Project - Mississippian Barnett Shale, Bend Arch-Fort Worth Basin Province Assessment Units USGS National Assessment of Oil and Gas Project - Hydrogen Index (HI), Bend Arch-Fort Worth Basin Province Assessment Units National Assessment of Oil and Gas Tuscaloosa and Woodbine Downdip Gas Assessment Units National Assessment of Oil and Gas Project - Powder River Basin Province (033) - Wyoming Coalbed Methane Wells USGS National and Global Oil and Gas Assessment Project - Sunbury and Chattanooga Shales Assessment Unit Boundaries and Assessment Input Forms