Filters: Date Range: {"choice":"year"} (X) > Tags: {"scheme":"none"} (X)
256 results (43ms)|
Filters
Date Types (for Date Range)
Types Contacts
Categories Tag Types Tags (with Scheme=none) |
A three-dimensional groundwater flow model using MODFLOW-NWT was developed to evaluate historical and potential stream capture in the lower Humboldt River Basin, Nevada. The Humboldt River Basin is the only river basin that is contained entirely within the state of Nevada. The effect of groundwater pumping on the Humboldt River is not well understood. Tools are needed to determine stream capture and manage groundwater pumping in the Humboldt River Basin. Previous work has demonstrated that the river’s surface-water resource is sensitive to groundwater withdrawals, which have steadily increased since the 1950s for agriculture, municipal, and mining uses. A numerical groundwater flow model was developed for the purpose...
Categories: Data Release - Revised;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Capture,
Groundwater Model,
Humboldt River Basin watershed,
Hydrology,
InlandWaters,
A previously published MODFLOW-NWT groundwater-flow model for the Rush Springs aquifer in western Oklahoma (using 1 steady state stress period followed by 444 monthly stress periods representing 1979-2015; Ellis, 2018a) was used as the basis of several groundwater-use scenarios. The model is a 3-layer model including the Cloud Chief formation (confining unit of the Rush Springs aquifer), alluvial and terrace deposits, and the Rush Springs aquifer. The scenarios were used to assess the effects of increasing groundwater withdrawals from the Rush Springs aquifer on base flows to streams that flow into Fort Cobb Reservoir to address concerns over groundwater use reducing inflows to the lake. The effects of groundwater...
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown herein as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Assessment Unit,
Continuous Assessment Unit,
Earth Science,
Economic geology,
Energy Resources,
The Hudson Shelf Valley is the submerged seaward extension of the ancestral Hudson River drainage system and is the largest physiographic feature on the Middle Atlantic continental shelf. The valley begins offshore of New York and New Jersey at about 30-meter (m) water depth, runs southerly and then southeasterly across the Continental Shelf, and terminates on the outer shelf at about 85-m water depth landward of the head of the Hudson Canyon. Portions of the 150-kilometer-long valley were surveyed in 1996, 1998, and 2000 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to map the bathymetry and backscatter...
The Sandy Hook artificial reef, located on the sea floor offshore of Sandy Hook, New Jersey was built to create habitat for marine life. The reef was created by the placement of heavy materials on the sea floor; ninety-five percent of the material in the Sandy Hook reef is rock. In 2000, the U.S. Geological Survey surveyed the area using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard (CCG) ship Frederick G. Creed. The purpose of this multibeam survey, done in cooperation with the U.S. Army Corps of Engineers when the Creed was in the New York region in April 2000, was to map the bathymetry and backscatter intensity of the sea floor in the area of the Sandy Hook artificial reef. The collected...
Categories: Data;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Citation,
Downloadable,
Map Service;
Tags: GeoTIFF image,
Middle Atlantic Bight,
New Jersey,
New York,
New York Bight,
The Sandy Hook artificial reef, located on the sea floor offshore of Sandy Hook, New Jersey was built to create habitat for marine life. The reef was created by the placement of heavy materials on the sea floor; ninety-five percent of the material in the Sandy Hook reef is rock. In 2000, the U.S. Geological Survey surveyed the area using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard (CCG) ship Frederick G. Creed. The purpose of this multibeam survey, done in cooperation with the U.S. Army Corps of Engineers when the Creed was in the New York region in April 2000, was to map the bathymetry and backscatter intensity of the sea floor in the area of the Sandy Hook artificial reef. The collected...
Categories: Data;
Types: Citation;
Tags: Middle Atlantic Bight,
New Jersey,
New York,
New York Bight,
North Atlantic Ocean,
Marine geophysical mapping of the Queen Charlotte Fault in the eastern Gulf of Alaska was conducted in 2016 as part of a collaborative effort between the U.S. Geological Survey and the Alaska Department of Fish and Game to understand the morphology and subsurface geology of the entire Queen Charlotte system. The Queen Charlotte fault is the offshore portion of the Queen Charlotte-Fairweather Fault: a major structural feature that extends more than 1,200 kilometers from the Fairweather Range of southern Alaska to northern Vancouver Island, Canada. The data published in this data release were collected along the Queen Charlotte Fault between Cross Sound and Noyes Canyon, offshore southeastern Alaska from May 18 to...
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: ADFG,
Alaska Department of Fish and Game,
Baranof Fan,
Baranof Island,
CMHRP,
This section provides code for reproducing the figures in Rahmani et al. (2023b). The full model archive is organized into these four child items: 1. Model code - Python files and README for reproducing model training and evaluation 2. Inputs - Basin attributes and shapefiles, forcing data, and stream temperature observations 3. Simulations - Simulation descriptions, configurations, and outputs [THIS ITEM] 4. Figure code - Jupyter notebook to recreate the figures in Rahmani et al. (2023b) The publication associated with this model archive is: Rahmani, F., Appling, A.P., Feng, D., Lawson, K., and Shen, C. 2023b. Identifying structural priors in a hybrid differentiable model for stream water temperature modeling....
Water quality in the Barnegat Bay estuary along the New Jersey coast is the focus of a multidisciplinary research project begun in 2011 by the U.S. Geological Survey (USGS) in cooperation with the New Jersey Department of Environmental Protection. This narrow estuary is the drainage for the Barnegat Bay watershed and flushed by just three inlets connecting it to the Atlantic Ocean, is experiencing degraded water quality, algal blooms, loss of seagrass, and increases in oxygen-depletion events. The scale of the estuary and the scope of the problems within it required a regional approach to understand and model water circulation within the bay and adjacent ocean. A continuous elevation surface (terrain model) integrating...
A three-dimensional groundwater flow model was developed in 1997 to evaluate the groundwater flow system at Puget Sound Naval Shipyard, Naval Base Kitsap, Bremerton, Washington (https://pubs.er.usgs.gov/publication/wri964147). In 2016, a regional groundwater flow model for the greater Kitsap Peninsula was developed (https://pubs.er.usgs.gov/publication/sir20165052). Using information from the 2016 regional model, the 1997 groundwater flow model for the Puget Sound Naval Shipyard was updated with a new interpretation of the underlying hydrogeologic units, a refined model grid, and improved recharge estimates. A steady-state model version was constructed in MODFLOW-NWT to simulate equilibrium conditions. MODPATH forward...
Continuous water temperature data were collected at multiple sites along the Middle Fork and mainstem Willamette Rivers between Jasper and Newberg, Oregon, to support effectiveness monitoring for a large-scale channel and floodplain restoration program (Willamette Focused Investment Partnership, WFIP). Continuous water temperature loggers were deployed at a subset of WFIP restoration sites where river restoration activities were implemented to improve habitat conditions for native fish species. Data from water temperature monitoring will be used to evaluate the effectiveness of restoration activities at improving habitat conditions for Endangered Species Act (ESA)-listed salmonids and other native fish in the Willamette...
Categories: Data;
Tags: Albany,
Bowers Rock State Park,
Browns Island,
Collins Bay,
Middle Fork Willamette River,
Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University...
This dataset, termed "GAGES II", an acronym for Geospatial Attributes of Gages for Evaluating Streamflow, version II, provides geospatial data and classifications for 9,322 stream gages maintained by the U.S. Geological Survey (USGS). It is an update to the original GAGES, which was published as a Data Paper on the journal Ecology's website (Falcone and others, 2010b) in 2010. The GAGES II dataset consists of gages which have had either 20+ complete years (not necessarily continuous) of discharge record since 1950, or are currently active, as of water year 2009, and whose watersheds lie within the United States, including Alaska, Hawaii, and Puerto Rico. Reference gages were identified based on indicators that they...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Alabama,
Alaska,
All 50 states,
Arizona,
Arkansas,
A three-dimensional groundwater flow model, constructed in MODFLOW-NWT, was developed to evaluate the groundwater flow system near Puget Sound, Pierce and King Counties, Washington. A steady-state model version was constructed to simulate equilibrium conditions, while a transient model version was constructed to simulate monthly variability from January 2005 to December 2015. The model was used to simulate several hydrologic scenarios. This data release contains the input and output files for the simulations described in the associated model documentation report (https://doi.org/10.3133/sir20245026v2).
A new groundwater flow model for western Chippewa County, Wisconsin has been developed by the Wisconsin Geological and Natural History Survey (WGNHS) and the U.S. Geological Survey (USGS). An analytic element GFLOW model was constructed and calibrated to generate hydraulic boundary conditions for the perimeter of the more detailed three-dimensional MODFLOW-NWT model. This three-dimensional model uses the USGS MODFLOW-NWT finite difference code, a standalone version of MODFLOW-2005 that incorporates the Newton (NWT) solver. The model conceptualizes the hydrogeology of western Chippewa County as a six-layer system which includes several hydrostratigraphic units. The model explicitly simulates groundwater-surface-water...
These data products are preliminary burn severity assessments derived from data obtained from suitable imagery (including Landsat TM, Landsat ETM+, Landsat OLI, Sentinel 2A, and Sentinel 2B). The pre-fire and post-fire subsets included were used to create a differenced Normalized Burn Ratio (dNBR) image. The dNBR image attempts to portray the variation of burn severity within a fire. The severity ratings are influenced by the effects to the canopy. The severity rating is based upon a composite of the severity to the understory (grass, shrub layers), midstory trees and overstory trees. Because there is often a strong correlation between canopy consumption and soil effects, this algorithm works in many cases for Burned...
This data package includes 2 child items with data from Pacific Black Brant (Branta bernicla nigricans) during winter and migration periods. Child Item 1: "Body mass, Morphological Measurements, Flock Counts, and Age-Ratios from Black Brant Overwintering in Three Lagoons Along the Baja California Peninsula, Mexico". The data include: (1) body mass and morphological measurements from sport hunter harvested brant, and (2) census counts of brant in Bahia de San Quintin, (3) counts for flock age ratio determination, and (4) behavior. Child Item 2: "Black Brant (Branta bernicla nigricans) Radio Detection and Migration Timing Alaska to Mexico". Data from brant tagged with VHF radio transmitters in July 1999 on the Yukon...
Categories: Data;
Tags: Alaska,
Animal populations,
Animals/Vertebrates,
Bahia San Quintín,
Baja California,
A generic, three-dimensional finite-difference model, MODFLOW-2005 (version 1.12.00) and MODPATH-6 (version 6.0.01), was created to better understand the amount of vertical flow and cross-contamination of trichloroethene (TCE) that may be occurring in discontinued extraction wells under current (2018-19) ambient-flow conditions at site 25 of the Edwards Air Force Base, California. The wells are long-screened (100-ft long), contain a surrounding sandpack, and have not been pumped for approximately 10 years. The groundwater flow model utilized multiple observations made from the field measurements of flow and transport to conceptualize, calculate, and simulate in-well flow, and flow in the sand pack. The model was...
This dataset accompanies the planned publication “Mantle Melting in Regions of Thick Continental Lithosphere-Examples from Late Cretaceous and Younger Volcanic Rocks, Southern Rocky Mountains, Colorado” in the journal Geosphere. The dataset includes 40Ar/39Ar data for 19 samples from the Rabbit Ears volcanic field and from the Elkhead Mountains in northcentral Colorado, USA. Samples were collected from this area by James Mize (University of Colorado, Boulder), Lang Farmer (University of Colorado, Boulder), and Michael Cosca (USGS) with helpful input about sampling locations by Kenzie Turner (USGS). The samples were analyzed in the Denver Argon Geochronology Laboratory at the USGS from September, 2013 to July, 2017.
Categories: Data;
Tags: 40Ar/39Ar,
Colorado,
Denver Argon Geochronology Laboratory,
Elkhead Mountains,
GGGSC,
Digital flood-inundation maps for a 4.46-mile reach of the Blue River near Kansas City, Missouri, were created by the U.S. Geological Survey (USGS) in cooperation with the City of Kansas City, Missouri. The flood-inundation maps, accessed through the USGS Flood Inundation Mapping Program website at http://water.usgs.gov/osw/flood_inundation/ , depict estimates of the spatial extent and depth of flooding corresponding to select-water levels (stages) at the USGS streamgage 06893195 Blue River at Red Bridge Road, Kansas City, Missouri reference streamgage. Near-real-time stage data from the streamgage may be obtained from the USGS National Water Information System database at https://doi.org/10.5066/F7P55KJN. Flood...
|
|
