Filters: Tags: ASCII (X) > Date Range: {"choice":"year"} (X) > partyWithName: Idaho Water Science Center (X)
16 results (54ms)
Filters
Date Types (for Date Range)
Categories Tag Types Tag Schemes |
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The elevation contour data was created based on bathymetry obtained in the meander reach collected in about a one month period extending from 6/3/2010 - 6/19/2010. This subset data extends from river kilometer designator 228 upstream to 237. Similar methods used to collect and process the bathymetry are described in Fosness (2013). The contours were created from a surface raster (also referred to as digital elevation model) of the...
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. In 2009, the Kootenai Tribe of Idaho released and implemented the Kootenai River Habitat Restoration Master Plan. This plan aimed to restore, enhance, and maintain the Kootenai River habitat and landscape to support and sustain habitat conditions for aquatic species and animal populations. In support of these restoration efforts, the U.S. Geological Survey, in cooperation with the Kootenai Tribe of Idaho, conducted high-resolution...
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The surficial bed-sediment facies, herein after referred to as the sediment facies, quantitatively describes the dominant sediment substrate on the surface of the river bed. Sediment facies categories were based on the grain size distribution of Wentworth (1922) which included the following ranges or combination of ranges: gravel (2-64mm), sand (0.063-2mm) and silt/clay (less than 0.063mm). An underwater video monitoring system UVMS...
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The major clay step features are defined as having a vertical face that is greater than 1.5 meters. The clay step features were qualitately identified using an underwater video monitoring sysyem. The extent and magnitude of the clay steps were mapped using a muliteam bathymetric echosounder system.
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. In 2009, the Kootenai Tribe of Idaho released and implemented the Kootenai River Habitat Restoration Master Plan. This plan aimed to restore, enhance, and maintain the Kootenai River habitat and landscape to support and sustain habitat conditions for aquatic species and animal populations. In support of these restoration efforts, the U.S. Geological Survey, in cooperation with the Kootenai Tribe of Idaho, conducted high-resolution...
Surficial Sediment Facies features near Shorty's Island on the Kootenai River near Bonners Ferry, ID
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The surficial bed-sediment facies, herein after referred to as the sediment facies, quantitatively describes the dominant sediment substrate on the surface of the river bed. Sediment facies categories were based on the grain size distribution of Wentworth (1922) which included the following ranges or combination of ranges: gravel (2-64mm), sand (0.063-2mm) and silt/clay (less than 0.063mm). An underwater video monitoring system UVMS...
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. Hydrographic survey data were collected from May 22 through June 10, 2015, using an acoustic Doppler current profiler (ADCP) coupled with an RTK-GNSS rover. The collected hydrographic data consisted of three elements—riverbed elevations derived from bathymetry, depth-averaged streamflow velocity, and instantaneous discharge measurements. Hydrographic data were collected as the boat moved across the river at planned cross sections...
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. An Acoustic Doppler Current Profiler (ADCP) was used to survey streamflow characteristics including total streamflow, velocity magnitude and secondary flow structure, and backscatter intensity at 29 cross-sections at the Myrtle Creek Bend on the Kootenai River on June 1, 2012. Each of the 29 cross-sections consisted of 4 transects or bank-to-bank coverage to obtain a representative velocity pattern. The mean daily streamflow was...
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The major clay step features are defined as having a vertical face that is greater than 1.5 meters. The clay step features were qualitately identified using an underwater video monitoring sysyem. The extent and magnitude of the clay steps were mapped using a muliteam bathymetric echosounder system.
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. In 2009, the Kootenai Tribe of Idaho released and implemented the Kootenai River Habitat Restoration Master Plan. This plan aimed to restore, enhance, and maintain the Kootenai River habitat and landscape to support and sustain habitat conditions for aquatic species and animal populations. In support of these restoration efforts, the U.S. Geological Survey, in cooperation with the Kootenai Tribe of Idaho, conducted high-resolution...
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The minor clay step features are defined as having a vertical face that is less than or equal to 1.5 meters. The clay step features were qualitately identified using an underwater video monitoring sysyem. The extent and magnitude of the clay steps were mapped using a muliteam bathymetric echosounder system.
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. Topographic survey data were collected along planned lines from the river water surface to the top of the bank in the study area. Topographic survey data collection began on May 22 and concluded on June 10, 2014. A real-time kinematic (RTK) GNSS network provided real-time survey grade horizontal and vertical positioning.
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The minor clay step features are defined as having a vertical face that is less than or equal to 1.5 meters. The clay step features were qualitately identified using an underwater video monitoring sysyem. The extent and magnitude of the clay steps were mapped using a muliteam bathymetric echosounder system.
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The shaded relief raster data was created based on bathymetry obtained in the meander reach collected in about a one month period extending from 6/3/2010 - 6/19/2010. This subset data extends from river kilometer designator 228 upstream to 237. Similar methods used to collect and process the bathymetry are described in Fosness (2013). The shaded relief was created from a surface raster (also referred to as digital elevation model)...
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. Hydrographic survey data were collected from May 22 through June 10, 2015, using an acoustic Doppler current profiler (ADCP) coupled with an RTK-GNSS rover. The collected hydrographic data consisted of three elements—riverbed elevations derived from bathymetry, depth-averaged streamflow velocity, and instantaneous discharge measurements. Hydrographic data were collected as the boat moved across the river at planned cross sections...
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. Acoustic doppler current profiling (ADCP) data was collected to describe streamflow characteristics including total streamflow, velocity magnitude and secondary flow structure, and backscatter intensity at 29 cross-sections at the Myrtle Creek Bend on the Kootenai River on June 3, 2013. Each of the 29 cross-sections consisted of 4 transects or bank-to-bank coverage to obtain a representative velocity pattern. The mean daily streamflow...
|
|