Filters: Tags: Essex County (X) > Types: Map Service (X) > partyWithName: U.S. Geological Survey (X)
5 results (27ms)
Filters
Date Range
Types Contacts
Categories Tag Types
|
Digital flood-inundation maps for coastal communities within Essex, Hudson, and Union Counties in New Jersey were created by water surfaces generated by an Advanced Circulation hydrodynamic (ADCIRC) and Simulating Waves Nearshore (SWAN) model from the Federal Emergency Management Agency (FEMA) Region II coastal analysis and mapping study (Federal Emergency Management Agency, 2014). Six synthetic modeled tropical storm events from a library of 159 events were selected based on parameters including landfall location or closest approach location, maximum wind speed, central pressure, and radii of winds. Two storm events were selected for the tide gage providing two "scenarios" and accompanying inundation-map libraries....
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Essex County,
Hudson County,
New Jersey Coastal,
Union County,
digital maps,
Digital flood-inundation maps for an approximately 295-mile length of the New Jersey coastline and tidewaters through 10-coastal counties stretching from Cumberland County through Bergen County; including Cumberland, Cape May, Atlantic, Ocean, Monmouth, Middlesex, Union, Essex, Hudson, and Bergen counties were created by the U.S Geological Survey (USGS) in cooperation with the New Jersey Department of Environmental Protection (NJDEP) and New Jersey Office of Emergency Management (NJOEM). The flood-inundation maps depict extent and depth estimates of coastal flooding corresponding to selected tidal elevations recorded by 25 real-time USGS tide gages located throughout the length of the study area coastline. The flood-inundation...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Atlantic County,
Bergen County,
Cape May County,
Cumberland County,
Essex County,
From July to November 2019, 48 environmental samples and four quality assurance and quality control samples were collected throughout the Lake Champlain and Susquehanna River Basins. Samples were collected from 10 production wells and nine domestic wells in the Lake Champlain Basin, and 14 production wells and 15 domestic wells in the Susquehanna River Basin. Of the total wells sampled, 24 were completed in bedrock and 23 were completed in sand and gravel. Approximately 20 percent of samples were collected from wells that previously have been sampled as part of this study in 2005, 2009, and 2014. Groundwater samples were collected prior to any treatment or filtration systems, from existing domestic and production...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Ambient Monitoring,
Broome County,
Chenango County,
Clinton County,
Cortland County,
From May to December 2017, 48 environmental samples and six quality control samples were collected throughout the Upper Hudson and Central New York River Basins. Samples were collected from nine production wells and 11 domestic wells in the Upper Hudson River Basin, and 14 production wells and 14 domestic wells in the Central New York River Basin. Of the total wells sampled, 22 were completed in bedrock and 26 were completed in sand and gravel. Approximately 20 percent of samples were collected from wells that were previously sampled as in 2007 and 2012. Groundwater samples were collected prior to any treatment or filtration systems, from existing domestic and production wells equipped with permanently installed...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Ambient Monitoring,
Cayuga County,
Central New York River Basin,
Essex County,
Fulton County,
Digital flood-inundation maps for coastal communities within Bergen, Hudson, Essex, and Passaic Counties in New Jersey were created by water surfaces generated by an Advanced Circulation hydrodynamic (ADCIRC) and Simulating Waves Nearshore (SWAN) model from the Federal Emergency Management Agency (FEMA) Region II coastal analysis and mapping study (Federal Emergency Management Agency, 2014). Six synthetic modeled tropical storm events from a library of 159 events were selected based on parameters including landfall location or closest approach location, maximum wind speed, central pressure, and radii of winds. Two storm events were selected for the tide gage providing two "scenarios" and accompanying inundation-map...
|
|