Filters: Tags: GW or SW (X)
123 results (45ms)
Filters
Date Range
Extensions Types Contacts
Categories Tag Types
|
This dataset includes georeferenced tiff files from two separate reports for the Cortland study area that have been digitized into feature classes within ArcGIS. Not all digitized and georeferenced data was necessarily used in the final interpolations, however they may have contributed to understanding the local hydrogeology
This dataset includes georeferenced TIFF files from two separate reports for the Fishkill and Wappinger Falls study area that have been digitized into feature classes within ArcGIS. Not all digitized and georeferenced data was necessarily used in the final interpolations, however they may have contributed to understanding the local hydrogeology.
The city of Cortland is located in Cortland County, New York. Previous USGS reports here include Water-Resources Investigations Report 96-4255 (Miller and others, 1998), and Open-File Report 81-1022 (Miller and Brooks, 1981). The five child pages below break the data up into georeferenced and digitized previous report data, interpreted geologic information, well logs, supplemental point data, and interpolation statistics.
This U.S. Geological Survey (USGS) data release contains model scenario input and output files and nine hydrology and water-quality models developed using the Soil and Water Assessment Tool (SWAT). The models represent nine watersheds in eastern New York that drain to Lake Erie or the Niagara River and were created, calibrated, and validated for hydrology, sediment, and nutrients as baseline scenarios. Twenty-six additional scenarios were created to explore the effects of agricultural and urban best management practices, point source discharges, and green infrastructure on the water quality of tributaries to Lake Erie/Niagara River. Model documentation and scenario development are described in Merriman and others...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Allegany County,
Best-Management Practices,
Cattaraugus County,
Chautauqua County,
Erie County,
This folder contains analytical type-curve matches for selected hydraulic tests that support USGS Scientific Investigations Report 2020-5087, "Transmissivity Estimated from Brief Pumping Tests of Domestic Wells and Compared with Bedrock Lithofacies and Position on Hillsides in the Appalachian Plateau of New York." These data are part of a data release that contains observed water-level recovery data in 52 wells, matched to theoretical type curves defined by postulated values of aquifer transmissivity and storage, that together constitute the database for USGS Scientific Investigations Report 2020-5087. The water-level recovery data were collected after 13 to 132 seconds of pumping. Five of the wells were also...
PROBLEM There are more than 60 organizations and agencies collecting water-quality data on Long Island. The types of database management that are used to store and archive regulatory and non-regulatory data vary from paper forms to spreadsheets to State and Federal databases, and there is minimal communication between these systems. As a result, those interested in analyzing data may be unaware of what data exist and how those data can be obtained without a Freedom of Information Law request. A unified data sharing system that provides multiple levels of sensitive and non-sensitive data storage and dissemination is needed. This system should link the various databases and interact through web services to provide...
Categories: Data,
Project;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Cooperative Water Program,
GW or SW,
Geospatial Applications,
Groundwater-Quality Monitoring,
Mapping Application Development,
Background: Moreau Lake is located within Moreau Lake State Park, a 4,100 acre park divided by the Hudson River in northern Saratoga and southern Warren Counties of upstate New York. Moreau Lake has a surface area of 128 acres, a watershed of 469 acres, and 3.6 miles of shoreline. The lake has a “normal” mean depth of 32 feet and a maximum depth of 50 feet. An outlet control structure at the south end of the lake controls surface water outflow and protects adjacent property within the floodplain of Moreau Lake. The lake is considered a kettle lake and as such is surrounded by ice-contact sand and gravel (NY State Parks, 2006). Moreau Lake is a recreational water body used by the public for swimming, fishing,...
Categories: Data,
Project;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Ambient Monitoring,
Ambient Monitoring,
Cooperative Water Program,
GW or SW,
GW or SW,
This data release contains geospatial data defining estimates of the depth to water and water-table altitude in the upper glacial and Magothy Aquifers, the potentiometric surface of the confined Magothy and Jameco Aquifers, and the potentiometric surface of the Lloyd and North Shore Aquifers on Long Island, New York. Estimates are based on 502 water-level measurements made in wells across Long Island during April-May 2010. Water-table contours were interpolated using measurements from 349 wells screened in the upper glacial aquifer or shallow Magothy Aquifer. Potentiometric-surface contours in the confined Magothy and hydraulically connected Jameco Aquifer were interpolated using measurements from 94 wells. Potentiometric-surface...
This dataset includes well logs used in the creation of the Cincinnatus hydrogeologic framework. Well logs were used from multiple sources (DEC, DOT, NWIS) and were a crucial component in generating hydrogeologic layer elevations and thicknesses. Well logs are available in their original form on GeoLog Locator (https://webapps.usgs.gov/GeoLogLocator/#!/) and provided here in the digitized form (shapefiles and feature classes), which were used in the generation of the hydrogeologic framework.
This dataset includes georeferenced tiff files from three separate reports for the Rondout Neversink study area that have been digitized into feature classes within ArcGIS. Not all digitized and georeferenced data was necessarily used in the final interpolations, however they may have contributed to understanding the local hydrogeology.
Supplementary Points for the Fishkill and Wappinger Falls sourcewater study area in upstate New York
This dataset includes "smoothing points" used in the creation of the Fishkill and Wappinger Falls hydrogeologic framework. Smoothing points were manually added and were used to enhance interpolated layers using geologic assumptions and include: valley edge points, report points, and upland bedrock SSURGO points.
The town of Ellicottville is located in Cattaraugus County, New York. There are no previous USGS reports here. The four child pages below break the data up into interpreted geologic information, well logs, supplemental point data., and interpolation statistics
Introduction The Village of Malone, Franklin County, New York is located along the Salmon River where it exits the northern foothills of the Adirondack Mountains and flows northward across the St. Lawrence Lowlands until its confluence with the St. Lawrence River. The public water supply of the Village of Malone serves a population of 13,200 (U.S. EPA SDWIS database), which includes three correctional facilities. The source of the water supply is a thick glacial aquifer south of the village in the Adirondack foothills. Surficial mapping and interpretation of deglacial history that includes at least part of the Malone area includes the work of MacClintock and Stewart (1965) and Denny (1974). Deglacial history has...
Categories: Data,
Project;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Aquifer Mapping,
Aquifer Mapping,
Cooperative Water Program,
GW or SW,
GW or SW,
The coastal areas of southeastern New York (fig. 1) are highly vulnerable to tidal flooding (fig. 2). Timely evacuation of people from flood-threatened areas in advance of approaching hurricanes and nor'easters (northeast coastal storms) requires adequate flood-warning time. To begin addressing this need for immediate information on coastal flooding, the U.S. Geological Survey (USGS), in cooperation with the Town of Hempstead Department of Conservation & Waterways, Village of Freeport, and New York State Department of Environmental Conservation, has operated a network of real-time tidal water-elevation and meteorological stations since 1997 in the coastal areas of Long Island and New York City. Each tidal water-elevation...
Categories: Data,
Project;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Climate Impacts,
Climate Impacts,
Climate impacts,
Coastal Science,
Coastal Science,
This dataset includes spreadsheets with statistical data (mean and median absolute error) used in deciding which interpolation method best fit the corresponding dataset. All statistical data were paired with a visual inspection of the interpolation prior to determining the final raster product. All spreadsheets were generated using an automated python script (Jahn, 2020).
This dataset includes "smoothing points" used in the creation of the Cincinnatus hydrogeologic framework. Smoothing points were manually added by the project team and were used to enhance interpolated layers using geologic assumptions and include: valley edge points, centerline bedrock points (and where applicable L1 and L2 points), and upland bedrock SURGO points.
The Jamestown study area is located within the counties of Chautauqua and Cattaraugus, New York. The predominant population center is the city of Jamestown. Previous USGS reports here include Open-File Report 82-113 (Stelz and others 1982) and Bulletin 58-1960 (Crain, 1966) The five child pages below break the data up into georeferenced and digitized previous report data, interpreted geologic information, well logs, supplemental point data, and interpolation statistics.
This dataset includes spreadsheets with statistical data (mean and median absolute error) used in deciding which interpolation method best fit the corresponding dataset. All statistical data were paired with a visual inspection of the interpolation prior to determining the final raster product. All spreadsheets were generated using an automated python script (Jahn, 2020).
This dataset includes "smoothing points" used in the creation of the Roundout Neversink hydrogeologic framework. Smoothing points were manually added by the project team and were used to enhance interpolated layers using geologic assumptions and include: valley edge points, centerline bedrock points (and where applicable L1 and L2 points), and upland bedrock SURGO points.
Hurricane Sandy has created three open breaches in the barrier island system along the south shore of Long Island, N.Y. In response, the National Park Service has sought assistance from the U.S. Geological Survey (USGS) New York Water Science Center (NYWSC) to help evaluate the open breach condition in Federal Wilderness near the Old Inlet area of Fire Island National Seashore, N.Y. The NYWSC evaluation is initially focusing on two activities: measurement of water velocities and depths within the Wilderness breach, and collection of water levels within Great South Bay (GSB) adjacent to the breach. Measurement of water velocities and depths within the Wilderness breach is being done with a Sontek 1 M9 acoustic...
Categories: Data,
Project;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Beach and Barrier Dynamics,
Beach and Barrier Dynamics,
Beach and Barrier dynamics,
Coastal Science,
Coastal Science,
|
|