Filters: Tags: Hydrology (X) > partyWithName: U.S. Geological Survey (X) > partyWithName: Martin A Briggs (X) > partyWithName: Neil C Terry (X)
20 results (74ms)|
Filters
Date Range
Extensions Types
Contacts
Categories Tag Types
|
This data release contains motorboat-towed floating transient electromagnetic data collected from the Columbia River near Hanford WA. Data were collected using a ~16 foot (4.9 meters) outboard motorboat during two field campaigns: July 2021 and April 2022. In total, several hundred linear kilometers of data were collected from a reach of the Columbia that extends from approximately Vernita Bridge to Richland, WA with some additional data collected in the Horn area north of White Bluffs in April 2022. An Aarhus Geoinstruments FloaTEM system was used to collect these data. The depth of investigation of the FloaTEM system is variable but ranged from approximately 50 to 100 meters. Previously collected high-resolution...
Categories: Data;
Tags: Aquifer Mapping,
Columbia River,
Geophysics,
Hanford Reach,
Hydrogeologic Characterization,
This child item contains ground penetrating radar (GPR) data collected over a small alpine wetland between Mogul Mine and Cement Creek located near Silverton, Colorado. Mine-impacted water is transported to Cement Creek via surface channels and groundwater through this wetland. The GPR method transmits radar pulses into the ground and measures the returned amplitude from these pulses over time. Variations in subsurface electromagnetic (EM) properties (dielectric permittivity, electrical conductivity, and magnetic susceptibility) affect the timing and amplitude of returned radar energy. For example, variation in water or mineral content are physical properties that often influence the EM properties that are observed...
This child item contains frequency domain electromagnetic induction (FDEM) data collected along and around Cement Creek and California Gulch near Silverton, Colorado in support of other data collected at the site. The FDEM tool generates an EM field and measures eddy currents generated by conductive and/or magnetic materials in the subsurface in response to the applied field. A Geophex GEM-2 instrument with GPS was used with 5 frequencies ranging from 450 Hz to 18330 Hz. Additional details are contained in the ‘readme.txt’ files within each zip data directory.
Geophysical and Other Data From an Irrigation Monitoring Experiment at Haddam Meadows, CT, July 2019
An irrigation monitoring experiment was performed in Haddam Meadows State Park, Connecticut, on July 16, 2019. Prior to this experiment, ground penetrating radar (GPR), frequency domain electromagnetics (FDEM), and electrical resistivity tomography (ERT) geophysical data were collected over a 20 meter by 10-meter grid to provide baseline information. A vertical soil moisture probe was installed in the center of this area that recorded volumetric water content, temperature, and electrical conductivity at 9 discrete depths down to 1 meter below land surface. Over the next 8 hours, 5,300 liters of irrigation water (with specific conductance of 1,000 microSiemens per centimeter) was sprayed as evenly as practical over...
The electrical conductivity of the earth is used to help infer lithological and pore fluid properties. Various geophysical methods can provide estimates of the distribution of below ground electrical conductivity, with each method having certain limitations. This data release presents raw and processed results from hand-caried frequency domain electromagnetic induction imaging (EMI) data collected from June 27-28 along Blacktail Creek near Williston, North Dakota. Data were primarily collected by walking in the creek or along the riparian zones with the GEM-2 instrument (Geophex, Ltd.) at approximately 0.5 m off the ground in horizontal coplanar (ski flat) mode.
This child item contains fiber-optic distributed temperature sensing (FO-DTS) data collected along the streambed interface of two streams named Cement Creek and California Gulch Creek located near Silverton Colorado. The FO-DTS method utilizes the temperature-dependent backscatter of light pulses emitted along armored fiber-optic cables to evaluate temperature at discrete linear sampling locations. For these deployments a Salixa XT-DTS control unit (Salixa Ltd, Hertfordshire, UK) was used, and measurements were made over several day increments at 0.508 m linear resolution along the streambed interface. Specific locations for collected data are located within the data files, and additional details are contained in...
This child item contains ground penetrating radar (GPR) data collected over a small alpine wetland between Mogul Mine and Cement Creek located near Silverton, Colorado. Mine-impacted water is transported to Cement Creek via surface channels and groundwater through this wetland. The GPR method transmits radar pulses into the ground and measures the returned amplitude from these pulses over time. Variations in subsurface electromagnetic (EM) properties (dielectric permittivity, electrical conductivity, and magnetic susceptibility) affect the timing and amplitude of returned radar energy. For example, variation in water or mineral content are physical properties that often influence the EM properties that are observed...
This child item contains self-potential (SP) data collected over a small alpine wetland between Mogul Mine and Cement Creek located near Silverton, Colorado. Mine-impacted water is transported to Cement Creek via surface channels and groundwater through this wetland. The SP method measures passive voltages in the subsurface using a high impedance voltmeter with one fixed electrode at a base station and one mobile electrode. Strong self-potential anomalies have been associated with ore bodies and sharp redox fronts. Data were collected with an Agilent U1252B multimeter with STELTH3 Ag-AgCl Model SRE-011-SPB porous pot electrodes. Additional details are contained in the ‘readme.txt’ file within this directory.
This child item contains frequency domain electromagnetic induction (FDEM) data collected along and around Cement Creek California Gulch, and the Animas River near Silverton, Colorado in support of other data collected at the site. The FDEM tool generates an EM field and measures eddy currents generated by conductive and/or magnetic materials in the subsurface in response to the applied field. A Geophex GEM-2 instrument with GPS was used with frequencies ranging from 450 Hz to 47970 Hz. Additional details are contained in the ‘readme.txt’ files within each zip data directory.
The extraction of unconventional oil and gas (UOG) resources often produces highly saline waste waters, which can be released to the river corridor environment during spills and pipe leakage. In North Dakota, USA more than 8,000 spills were recorded from 2008-2015, and more than half of those spills were related to pipelines. Data collected for this study were related to UOG wastewater leakage from a pipeline into a creek in the Williston Basin, North Dakota discovered on the January 6th, 2015. Although the spill was followed by extensive remediation efforts, we conducted geophysical surveys in June 2017 to assess the potential for waste water retention along the Blacktail Creek corridor as part of a larger evaluation...
This data release contains three data types that could potentially be used to infer spatiotemporal variability in groundwater discharge processes, along with other research and monitoring purposes: 1) Temporally continuous stream channel water temperature and adjacent streambank air temperature time series data (generally starting November 2020) as well as limited temperature data from May to October 2022 from select seeps and springs; 2) Discrete stable isotope data collected from stream water (May 2021, October/November 2021, May 2022, October/November 2022); and 3) Discrete dissolved radon gas data from stream water (collected May 2021 and May 2022). Data were collected at 51 temporary stations installed along...
Categories: Data,
Data Release - Revised;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Shapefile;
Tags: Ambient Monitoring,
Groundwater and Streamflow Information,
Neversink River,
New York,
Radon,
This child item contains magnetometer (MAG) data collected along and around the Animas River near Silverton, Colorado in support of other data collected at the site. The MAG tool measures the magnetic field from one or multiple sensors. A Geometrics G-858AP instrument with GPS and backpack was used, with two magnetometers vertically mounted on the operator-carried staff to enable measurement of the magnetic field gradient. Additional details are contained in the ‘readme.txt’ files within each zip data directory.
This dataset has been archived; it has been superseded by version 2.0 (May 2022) which can be found at https://doi.org/10.5066/P97HDPAY. Near-surface geophysical data from within the Bonita Peak Mining District in Silverton, Colorado, USA are presented. The data include fiber optic distributed temperature sensing (FO-DTS) and frequency domain electromagnetic induction (FDEM) data collected in and around roughly 1 km reaches of Cement Creek and California Gulch. Additional data, including ground penetrating radar (GPR) and self potential (SP), were gathered from a peatland that intercepts acid mine drainage from Mogul Mine into Cement Creek. The peatland is located off the eastern bank of Cement Creek in the northern...
The Upper Delaware River is a unique example of an aquatic system where summer river temperature is actively managed for ecological purposes. River temperature at the mainstem Delaware River at Lordville, NY gage (USGS 01427207) is targeted to remain below 25°C, with warm events potentially mitigated via directed upstream reservoir releases, a process guided by predictive tools. These directed releases currently occur at the Cannonsville Dam on the West Branch, though the temperature criteria at the Lordville gage is also influenced by releases from the Pepacton Dam on the east branch. To increase the spatial resolution of summer river temperature data available for understanding river temperature processes and...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: New York,
Sullivan County,
USGS Science Data Catalog (SDC),
Upper Delaware River,
environment,
This data release documents streambed sediment thickness in the Neversink watershed (NY) as determined by field observations and HVSR passive seismic measurements, and were collected as an extension of a previous data set collected in the same watershed (see Associated Items). These measurements were made between May 17, 2021 and May 21, 2021 using MOHO Tromino three-component seismometers (MOHO, S.R.L.). Seismic observations were converted to sediment thickness (depth to bedrock, meters) using the horizontal-to-vertical spectral ratio (HVSR) method. Resonance frequencies were determined from time domain data using GRILLA (MOHO, S.R.L.) software and converted to inferred depth to bedrock for a range of possible...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: GW or SW,
Geophysics,
Geophysics,
HVSR,
Hydrology,
Frequency domain electromagnetic induction (FDEM) data were collected in September 2016 near the Agashashok River and its tributaries, within the Noatak National Preserve near Kotzebue, AK to aid in local permafrost mapping. Data were collected with a GEM-2 instrument (1.6 m coil separation, Geophex, Ltd.); a broadband sensor that measures the bulk conductivity and magnetic susceptibility of the subsurface to approximately 5-10 meters depth. The instrument is hand carried by a single operator and data are collected at walking speeds.
This child item contains self-potential (SP) data collected over a small alpine wetland between Mogul Mine and Cement Creek located near Silverton, Colorado. Mine-impacted water is transported to Cement Creek via surface channels and groundwater through this wetland. The SP method measures passive voltages in the subsurface using a high impedance voltmeter with one fixed electrode at a base station and one mobile electrode. Strong self-potential anomalies have been associated with ore bodies and sharp redox fronts. Data were collected with an Agilent U1252B multimeter with STELTH3 Ag-AgCl Model SRE-011-SPB porous pot electrodes. Additional details are contained in the ‘readme.txt’ file within this directory.
Electromagnetic (EM) geophysical methods provide information about the bulk electrical conductivity of the subsurface. EM data has been widely used to investigate aquifers and geologic structures. In the following study, the United States Geological Survey conducted a boat-towed, waterborne transient electromagnetic (FloaTEM) survey to examine conductivity within the subsurface of the main Delaware River channel and the Leipsic River. The Leipsic River flows through an estuary into the Delaware Bay. Subsurface conductive zones, when viewed in the context of the regional conceptual model and other data, can help determine the likely groundwater location of the freshwater/saltwater interface within the Delaware River,...
Categories: Data;
Tags: Delaware River,
Geophysics,
Hydrology and Hydrogeology,
USGS Science Data Catalog (SDC),
geophysics,
Near-surface geophysical data from within the Bonita Peak Mining District in Silverton, Colorado, USA are presented. These data were collected in 2019. The data include fiber optic distributed temperature sensing (FO-DTS) and frequency domain electromagnetic induction (FDEM) data collected in and around roughly 1 km reaches of Cement Creek and California Gulch. Additional data, including ground penetrating radar (GPR) and self potential (SP), were gathered from a peatland that intercepts acid mine drainage from Mogul Mine into Cement Creek. The peatland is located off the eastern bank of Cement Creek in the northern portion of the reach surveyed with FO-DTS and FDEM. In 2021, an FO-DTS, FDEM, and magnetometer (MAG)...
Categories: Data Release - Revised;
Tags: Animas River,
California Gulch,
Cement Creek,
Colorado,
Focused Assessments,
This child item contains fiber-optic distributed temperature sensing (FO-DTS) data collected along the streambed interface of two streams named Cement Creek and California Gulch Creek, as well as the Animas River, located near Silverton Colorado. The FO-DTS method utilizes the temperature-dependent backscatter of light pulses emitted along armored fiber-optic cables to evaluate temperature at discrete linear sampling locations. For these deployments a Salixa XT-DTS control unit (Salixa Ltd, Hertfordshire, UK) was used, and measurements were made over several day increments at 0.508 m linear resolution along the streambed interface. Specific locations for collected data are located within the data files, and additional...
|
|
