Filters: Tags: State of Washington (X) > Date Range: {"choice":"year"} (X)
22 results (38ms)
Filters
Date Types (for Date Range)
Contacts
Categories Tag Types
|
RBRduo pressure and temperature sensors, mounted on aluminum frames, were moored in shallow (< 6 m) water depths in Skagit and Bellingham Bays, Washington, USA, from December 2017 to February 2018, to capture wave heights and periods. Continuous pressure fluctuations are transformed into surface-wave observations of wave heights, periods, and frequency spectra at 30-minute intervals.
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: CMGP,
Coastal and Marine Geology Program,
Marine Geology,
Oceans,
PCMSC,
We characterized seafloor sediment conditions near the mouth of the Elwha River from underwater photographs taken every four hours from September 2011 to December 2013. A digital camera was affixed to a tripod that was deployed in approximately 10 meters of water (Tripod location from September 2011 to April 2013: 48.15333, -123.55931; tripod location from April 2013 to December 2013: 48.15407, -123.55444). Each photograph was qualitatively characterized as one of six categories: (1) base, or no sediment; (2) low sediment; (3) medium sediment; (4) high sediment; (5) turbid; or (6) kelp. For base conditions, no sediment was present on the seafloor. Low sediment conditions were characterized by a light dusting of...
Categories: Data;
Types: Citation,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Clallam County,
Elwha River,
Olympic Peninsula,
Remote Sensing,
State of Washington,
This portion of the data release presents a digital surface model (DSM) and hillshade image of the intertidal zone at Lone Tree Point, Kiket Bay, WA. The DSM has a resolution of 4 centimeters per pixel and was derived from structure-from-motion (SfM) processing of aerial imagery collected with an unmanned aerial system (UAS) on 2019-06-05. Unlike a digital elevation model (DEM), the DSM represents the elevation of the highest object within the bounds of a cell. Vegetation, buildings and other objects have not been removed from the data. In addition, data artifacts resulting from noise in the original imagery have not been removed. The raw imagery used to create the DSM was acquired using a UAS fitted with a Ricoh...
This data release contains motorboat-towed floating transient electromagnetic data collected from the Columbia River near Hanford WA. Data were collected using a ~16 foot (4.9 meters) outboard motorboat during two field campaigns: July 2021 and April 2022. In total, several hundred linear kilometers of data were collected from a reach of the Columbia that extends from approximately Vernita Bridge to Richland, WA with some additional data collected in the Horn area north of White Bluffs in April 2022. An Aarhus Geoinstruments FloaTEM system was used to collect these data. The depth of investigation of the FloaTEM system is variable but ranged from approximately 50 to 100 meters. Previously collected high-resolution...
Categories: Data;
Tags: Aquifer Mapping,
Columbia River,
Geophysics,
Hanford Reach,
Hydrogeologic Characterization,
This dataset contains information on the probabilities of storm-induced erosion (collision, inundation and overwash) for each 100-meter (m) section of the United States Pacific coast for return period storm scenarios. The analysis is based on a storm-impact scaling model that uses observations of beach morphology combined with sophisticated hydrodynamic models to predict how the coast will respond to the hydrodynamic forcing. Storm-induced water levels, due to both surge and waves, are compared to coastal elevations to determine the probabilities of three types of coastal change: collision (dune erosion), overwash, and inundation. Data on morphology (dune crest and toe elevation) and hydrodynamics (storm surge,...
Geochemical analysis of authigenic carbonates from the Cascadia Subduction Zone. Powdered carbonate samples for stable carbon (delta-C-13) and oxygen (delta-O-18) isotopes and carbonate phase were analyzed as a proxy for potential fluid sources, and to better understand how process, such as mixing, and oxidation, can alter the initial fluid isotopic composition and the archived fluid-source signature in the authigenic carbonates.
Categories: Data;
Tags: CMHRP,
Cascadia,
Coastal and Marine Hazards and Resources Program,
Geochemistry,
Marine Geology,
Simulatations of water levels in the Salish Sea for a continuous hindcast of the period October 1, 1985, to September 30, 2015 were conducted to evaluate the utility and skill of a sea-level anomaly predictor and to develop extreme water level estimates accounting for decadal climate variability. The model accounts for sea level position, tides, remote sea-level anomalies, local winds and storm surge and stream flows as they affect water density. Comparison of modeled and measured water levels showed the model predicts extreme water levels at NOAA tide gage stations within 0.15 m. Model inputs and outputs of time-series water levels along the -5 m depth isobath are presented. In addition, extreme water level recurrence...
Categories: Data;
Tags: CMHRP,
Climate Change,
Coastal and Marine Hazards and Resources Program,
Distributions,
Extreme Weather,
This portion of the data release presents a high-resolution orthomosaic images of the intertidal zones at Puget Creek and Dickman Mill Park, Tacoma, WA. The orthomosaics have a resolution of 1.3 centimeters per pixel and were derived from structure-from-motion (SfM) processing of aerial imagery collected with an unmanned aerial system (UAS) on 2019-06-03. The raw imagery used to create the orthomosaics was acquired using a UAS fitted with a Ricoh GR II digital camera featuring a global shutter. The UAS was flown on pre-programmed autonomous flight lines at an approximate altitude of 50 meters above ground level (AGL). The flight lines were oriented roughly shore-parallel and were spaced to provide approximately...
Simulations of water levels in the Salish Sea over the period October 1, 2016 to September 30, 2020 were conducted to validate the Salish Sea hydrodynamic model. The model accounts for sea level position, tides, remote sea-level anomalies, local winds and storm surge and stream flows as they affect water density. Comparison of modeled and measured water levels showed the model predicts extreme water levels at NOAA and USGS tide gage stations within 0.15 m. Model inputs and outputs of time-series forcing and water levels, respectively, are presented.
Categories: Data;
Tags: CMHRP,
Climate Change,
Coastal and Marine Hazards and Resources Program,
Distributions,
Extreme Weather,
This portion of the data release presents high-resolution orthomosaic images of the ocean beach at Fort Stevens State Park, OR, and Benson Beach at Cape Disappointment State Park, WA. The orthomosaics have resolutions of 5 centimeters per pixel and were derived from structure-from-motion (SfM) processing of aerial imagery collected with unoccupied aerial systems (UAS) during low tide surveys on 22 and 23 July 2021. The raw imagery used to create the orthomosaics was acquired with a UAS fitted with a Ricoh GR II digital camera featuring a global shutter. The UAS was flown on pre-programmed autonomous flight lines spaced to provide approximately 70 percent overlap between images from adjacent lines. The camera was...
Categories: Data;
Tags: Bathymetry and Elevation,
Benson Beach,
CHMRP,
Cape Disappointment,
Clatsop County,
First Release: Aug 2017 Revised: May 2018 (ver. 1.1) Time-series data of velocity, pressure, turbidity, conductivity, and temperature were collected near the mouth of the Elwha River, Washington, USA, from December 2010 through October 2014, for the Department of Interior’s Elwha River Restoration project. As part of this project, the U.S. Geological Survey studied the effects of renewed sediment supplies on the coastal ecosystems before, during, and following the removal of two dams, Elwha and Glines Canyon, from the Elwha River. Removal of the dams reintroduced sediment stored in the reservoirs to the river, and the river moved much of this sediment to the coast. Several benthic tripods were instrumented with...
Categories: Data,
Data Release - Revised;
Types: Citation;
Tags: CMGP,
CONDUCTIVITY,
CTD,
CTD measurement,
CURRENT METERS,
Introduction High-resolution swath bathymetry and backscatter were collected in the mouth of the Columbia River (MCR) as part of the Office of Naval Research (ONR) funded River and Inlet Dynamics Experiment in 2013. The goal of the U.S. Geological Survey’s component of the research was to evaluate the various hydrodynamic and sediment transport processes in the Columbia River estuary entrance using a combination of field observations coupled with Delft3D model simulations. The MCR is a dynamic estuary inlet with large waves, large tidal currents, and a significant river discharge, resulting in strong estuarine circulation. The field component of the study consisted of an intensive in-situ experiment including bottom-mounted...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Backscatter,
Bathymetry,
CMG,
CMGP,
Coastal and Marine Geology Program,
High-resolution chirp sub-bottom data were collected by the U.S. Geological Survey in April 2011 south of Bainbridge Island and west of Seattle in Puget Sound, Washington. Data were collected aboard the R/V Karluk during field activity K0211PS using an Edgetech SB-512i sub-bottom profiler. Sub-bottom acoustic penetration spans several tens of meters and is variable by location.
This portion of the data release presents digital surface models (DSM) and hillshade images of the intertidal zones at Puget Creek and Dickman Mill Park, Tacoma, WA. The DSMs have a resolution of 2.5 centimeters per pixel and were derived from structure-from-motion (SfM) processing of aerial imagery collected with an unmanned aerial system (UAS) on 2019-06-03. Unlike a digital elevation model (DEM), the DSM represents the elevation of the highest object within the bounds of a cell. Vegetation, buildings and other objects have not been removed from the data. In addition, data artifacts resulting from noise in the original imagery have not been removed. The raw imagery used to create this DSM was acquired using a...
Simulations of the period 2016-2099 were conducted using the Salish Sea hydrodynamic model to evaluate extreme water levels associated with anticipated changes in sea level and climate forcing. The model projections accounting for sea level position, tides, remote sea-level anomalies, local winds and storm surge and stream flows as they affect water density. Dynamically downscaled Weather Research and Forecasting (WRF) CMIP5 GFDL wind and atmospheric pressure fields were prescribed over the model open boundary and used to compute sea-level anomaly prescribed at the model ocean boundary. Simulations were made for eight different Sea-Level Rise (SLR) conditions, 0, 0.25, 0.5, 1, 1.5, 2, 3, and 5 meters relative to...
Categories: Data;
Tags: CMHRP,
Climate Change,
Coastal and Marine Hazards and Resources Program,
Distributions,
Extreme Weather,
This portion of the data release presents digital surface models (DSM) of the ocean beach at Fort Stevens State Park, OR, and Benson Beach at Cape Disappointment State Park, WA. The DSMs have resolutions of 10 centimeters per pixel and were derived from structure-from-motion (SfM) processing of aerial imagery collected with unoccupied aerial systems (UAS) during low tides on 22 and 23 July 2021. Unlike a digital elevation model (DEM), the DSMs represent the elevation of the highest object within the bounds of a cell. Vegetation, buildings, and other objects have not been removed from the data. The raw imagery used to create the DSMs was acquired with a UAS fitted with a Ricoh GR II digital camera featuring a global...
Categories: Data;
Tags: Bathymetry and Elevation,
Benson Beach,
CHMRP,
Cape Disappointment,
Clatsop County,
This portion of the data release presents high-resolution orthomosaic images of the ocean beach at Fort Stevens State Park, OR, and Benson Beach at Cape Disappointment State Park, WA. The orthomosaics have resolutions of 5 centimeters per pixel and were derived from structure-from-motion (SfM) processing of aerial imagery collected with unoccupied aerial systems (UAS) during low tide surveys on 7 and 8 August 2017. The raw imagery used to create the orthomosaics was acquired with a UAS fitted with a Ricoh GR II digital camera featuring a global shutter. The UAS was flown on pre-programmed autonomous flight lines spaced to provide approximately 70 percent overlap between images from adjacent lines. The camera was...
Categories: Data;
Tags: Bathymetry and Elevation,
Benson Beach,
CHMRP,
Cape Disappointment,
Clatsop County,
This portion of the data release presents a high-resolution orthomosaic image of the intertidal zone at Lone Tree Point, Kiket Bay, WA. The orthomosaic has a resolution of 2 centimeters per pixel and was derived from structure-from-motion (SfM) processing of aerial imagery collected with an unmanned aerial system (UAS) on 2019-06-05. The raw imagery used to create the orthomosaic was acquired using a UAS fitted with a Ricoh GR II digital camera featuring a global shutter. The UAS was flown on pre-programmed autonomous flight lines spaced to provide approximately 70 percent overlap between images from adjacent lines. The camera was triggered at 1 Hz using a built-in intervalometer. The UAS was flown at an approximate...
In February 2016 the U.S. Geological Survey, Pacific Coastal and Marine Science Center in cooperation with North Carolina State University and the National Park Service collected multibeam bathymetry and acoustic backscatter data in Lake Crescent located in Olympic National Park, Washington. These data were collected to support geologic hazard studies within the lake including mapping submarine landslides and faulting. Data were collected using a Reson 7111 multibeam echosounder pole-mounted to the 36-foot USGS R/V Parke Snavely. This USGS data release provides the processed bathymetry data in ASCIIRaster format, the acoustic backscatter data in TIFF format, as well as PDF maps of shaded relief bathymetry and acoustic...
Categories: Data;
Types: Citation;
Tags: Bathymetry,
Bathymetry,
Bathymetry and Elevation,
CMGP,
Geology,
A three-dimensional hydrodynamic model of the lower Columbia River (LCR) was constructed using the Delft3D Flexible Mesh (DFM) modeling suite to simulate water levels, flow, and seabed stresses between January 1, 2017, and April 20, 2020. This data release describes the construction and validation of the model application and provides input files suitable to run the model on Delft3D Flexible Mesh software version 2021.01. Model Description The model application was adapted from van der Steeg (2016) and Wherry and others (2019). The model domain extends between the Bonneville Dam at its upstream limit to about 130 km offshore of the river mouth in the Pacific Ocean (fig. 1). Ten equally spaced vertical sigma layers...
|
|