Skip to main content
Advanced Search

Filters: Tags: Streamflow (X) > partyWithName: U.S. Geological Survey - ScienceBase (X) > partyWithName: Water Resources (X) > Types: Citation (X)

7 results (11ms)   

View Results as: JSON ATOM CSV
thumbnail
In 1991, the U.S. Geological Survey (USGS) began a study of more than 50 major river basins across the Nation as part of the National Water-Quality Assessment (NAWQA) project of the National Water-Quality Program. One of the major goals of the NAWQA project is to determine how water-quality conditions change over time. To support that goal, long-term consistent and comparable monitoring has been conducted on streams and rivers throughout the Nation. Outside of the NAWQA project, the USGS also has collected long-term water-quality data to support additional assessments of changing water-quality conditions. These data have been combined to provide insight into how natural features and human activities have contributed...
thumbnail
In August 2015, water velocities around a fully-loaded commercial barge tow were measured as the barge tow traveled upstream through the Chicago Sanitary and Ship Canal from a starting position in Lockport Pool, and passed through the Electric Dispersal Barrier System at river mile (RM) 296 near Romeoville, IL. Velocity measurements were made in and alongside the gap formed by the junction between the boxed stern of a rake hopper barge and the raked bow of a rake tanker barge (herein referred to as the rake-to-box junction gap) using two SonTek Argonaut SW 3kHz acoustic Doppler velocity meters (ADVM). One ADVM was mounted 0.091 meters below the water surface, facing downward in the center of the rake-to-box junction...
thumbnail
This data release contains inputs for and outputs from hydrologic simulations of the Apalachicola-Chattahoochee-Flint River Basin (ACFB) in the southeastern U.S. using the Precipitation Runoff Modeling System (PRMS). Seven hydrologic models, one coarse-resolution model for the entire ACFB and six fine-resolution models of tributary sub-basins. These simulations were developed to provide estimates of water availability and statistics of streamflow. These PRMS model input and output data are intended to accompany a U.S. Geological Survey Scientific Investigations Report (LaFontaine and others, 2017); they include three types of data: 1) PRMS input parameter and data files, 2) PRMS output data files, and 3) GIS files...
thumbnail
On August 31, 2015, USGS Illinois Water Science Center staff deployed a 2000 kHz side-looking acoustic Doppler velocity meter (ADVM) in the Chicago Sanitary and Ship Canal (CSSC) at the Electric Dispersal Barrier System (EDBS). These data were collected as a fully loaded commercial barge tow traversed the EDBS and passed the ADVM three times, and as several smaller vessels and an unloaded barge tow passed the ADVM. The ADVM was mounted to a rigid 2-inch PVC pipe in compliance with U.S. Army Corps of Engineers (USACE) operational safety protocols for working in or near the EDBS. The pipe with ADVM was lowered 4.5 feet below the water surface on the west (right) bank of the canal at a location approximately 477 feet...
thumbnail
This U.S. Geological Survey (USGS) data release contains the code, data, executables, and other information necessary to run the application Unit Flows in Networks of Channels (UFINCH). The UFINCH application is a computer code that utilizes the geospatial stream connectivity and catchment geometry described in National Hydrography Dataset Plus value added attributes (NHDPlus Version 2) to simulate unit (15-minute) flows in networks of channels, generally by use of daily flows at the most downstream stream segment in a basin at which a USGS streamgage is located. Preliminary testing indicates that UFINCH may be most applicable for simulating unregulated, non-estuarial, flows in basins as large as 3,000 square miles...
This data set archives all inputs, outputs and scripts needed to reproduce the findings of W.H. Farmer and R.M. Vogel in the 2016 Water Resources Research article entitled "On the Deterministic and Stochastic Use of Hydrologic Model". Input data includes observed streamflow values, in cubic feet per second, for 1225 streamgages over the period from 01 October 1980 through 30 September 2011. Estiamted streamflows, for the same streamgages and periods, is provided from a general calibration of the Precipitation Runoff Modeling System. Output data includes the same with alternate realizations of streamflow generated following the descriptions in the associated report. These results can be regenerated by using the included...
thumbnail
Fish in Northern Great Plains streams evolved to survive heat, cold, floods and drought; however changes in streamflow associated with long-term climate change may render some prairie streams uninhabitable for current fish species. To better understand future hydrology of these prairie streams, the Precipitation-Runoff Modeling System (PRMS) model and output from the RegCM3 Regional Climate model were used to simulate streamflows for seven watersheds in eastern and central Montana, for a baseline period (water years 1982 - 1999) and three future periods: water years 2021 -2038, 2046 - 2063, and 2071 - 2088. These PRMS model input and output data are intended to accompany a journal article (Chase et al., 2016); they...


    map background search result map search result map Potential Effects of Climate Change on Streamflow in Eastern and Central Montana (2013-2014 Analyses) - PRMS Model Input and Output Velocity profiling in the Chicago Sanitary and Ship Canal near the US Army Corps of Engineers Electric Dispersal Barrier near Romeoville, Illinois Hydroacoustic measurements of velocities in and near the rake-to-box junction gap of a moving, fully-loaded commercial barge tow Pesticide concentration and streamflow datasets used to evaluate pesticide trends in the Nation’s rivers and streams, 1992-2012 Model Input and Output for Hydrologic Simulations of the Apalachicola-Chattahoochee-Flint River Basin using the Precipitation Runoff Modeling System Code, data, executables, and other information used to run Unit Flows in Networks of Channels (UFINCH) - A method for simulating unit and daily flows in networks of channels described by NHDPlus using continuous flow data at U.S. Geological Survey streamgages Hydroacoustic measurements of velocities in and near the rake-to-box junction gap of a moving, fully-loaded commercial barge tow Model Input and Output for Hydrologic Simulations of the Apalachicola-Chattahoochee-Flint River Basin using the Precipitation Runoff Modeling System Potential Effects of Climate Change on Streamflow in Eastern and Central Montana (2013-2014 Analyses) - PRMS Model Input and Output Pesticide concentration and streamflow datasets used to evaluate pesticide trends in the Nation’s rivers and streams, 1992-2012 Code, data, executables, and other information used to run Unit Flows in Networks of Channels (UFINCH) - A method for simulating unit and daily flows in networks of channels described by NHDPlus using continuous flow data at U.S. Geological Survey streamgages