Filters: Categories: Data (X) > partyWithName: Kenneth S Rukstales (X) > partyWithName: Mark D Petersen (X)
51 results (52ms)|
Filters
Date Range
Extensions Types Contacts
Tag Types Tag Schemes |
This data set represents the results of calculations of hazard curves for a grid of points with a spacing of 0.05 degrees in latitude and longitude. This particular data set is for horizontal spectral response acceleration for 0.2-second period with a 1 percent probability of exceedance in 1 year. The data are for the Western United States and are based on the long-term 2014 National Seismic Hazard Model.
These data sets are the results of calculations of hazard curves for a grid of points with a spacing of 0.05 degrees in latitude and longitude. They represent the chance of experiencing potentially damaging ground shaking for fixed ground shaking levels that corresponds with MMI = VII. The values are obtained by averaging the probability of experiencing MMI = VII based on a peak ground acceleration value of 0.2152 g for site class D, and the probability of experiencing MMI = VII based on 1.0-second spectral acceleration value of 0.2256 g for site class D. The data are for the Central and Eastern United States.
A seismic hazard model for South America, based on a smoothed (gridded) seismicity model, a subduction model, a crustal fault model, and a ground motion model, has been produced by the U.S. Geological Survey. These models are combined to account for ground shaking from earthquakes on known faults as well as earthquakes on un-modeled faults. This data set represents the results of calculations of hazard curves for a grid of points with a spacing of 0.1 degrees in latitude and longitude. This particular data set is for peak ground acceleration with a 10 percent probability of exceedance in 50 years.
Categories: Data;
Types: Citation,
Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Argentina,
Bolivia,
Brazil,
Chile,
Colombia,
A seismic hazard model for South America, based on a smoothed (gridded) seismicity model, a subduction model, a crustal fault model, and a ground motion model, has been produced by the U.S. Geological Survey. These models are combined to account for ground shaking from earthquakes on known faults as well as earthquakes on un-modeled faults. This data set represents the results of calculations of hazard curves for a grid of points with a spacing of 0.1 degrees in latitude and longitude. This particular data set is for horizontal spectral response acceleration for 0.2-second period with a 50 percent probability of exceedance in 50 years.
Categories: Data;
Types: Citation,
Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Argentina,
Bolivia,
Brazil,
Chile,
Colombia,
This dataset presents where, why, and how much probabilistic ground motions have changed with the 2018 update of the National Seismic Hazard Model (NSHM) for the conterminous U.S. (CONUS) vs. the 2014 NSHM. In the central and eastern U.S., hazard changes are the result of updated ground motion models (further broken down by median and epistemic uncertainty, aleatory variability, and site effects models) and gridded seismicity models. In the western U.S., hazard changes are the result of updated ground motion models in four urban areas with deep sedimentary basins and gridded seismicity models. Probabilistic ground motion changes (2% in 50 years probability of exceedance for a firm rock site, VS30 = 760 m/s, NEHRP...
Categories: Data;
Tags: Conterminous U.S.,
EHP,
Earthquake Hazards Program,
GHSC,
Geologic Hazards Science Center,
A comparison of the 2021 and 2001 National Seismic Hazard Models (NSHMs) for Hawaii was performed by creating difference and ratio maps for a uniform-hazard with a 2% probability of excedance in 50 years, for spectral accelerations at 0.2 and 1.0 second periods. The data are for a reference site condition of Vs30 equal to 760 m/s. A similar comparison between the ground-motion models (GMMs) used in 2021 versus 2001 was performed by running the 2021 NSHM with the 2001 GMMs. The maps and gridded data used to make the maps are available here for download.
Categories: Data
A seismic hazard model for South America, based on a smoothed (gridded) seismicity model, a subduction model, a crustal fault model, and a ground motion model, has been produced by the U.S. Geological Survey. These models are combined to account for ground shaking from earthquakes on known faults as well as earthquakes on un-modeled faults. This data set represents the results of calculations of hazard curves for a grid of points with a spacing of 0.1 degrees in latitude and longitude. This particular data set is for horizontal spectral response acceleration for 1.0-second period with a 10 percent probability of exceedance in 50 years.
Categories: Data;
Types: Citation,
Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Argentina,
Bolivia,
Brazil,
Chile,
Colombia,
This data set represents the results of calculations of hazard curves for a grid of points with a spacing of 0.05 degrees in latitude and longitude. It represents the average Modified Mercalli Intensity (MMI) with a 1-percent probability of exceedance in 1 year. Using a topographic-based soil classification method, the ground motions are amplified for soil type. The MMI values are the average of the MMI values obtained by converting peak ground acceleration to MMI and 1.0-second spectral response acceleration to MMI. The data are for the Western United States and are based on the long-term 2014 National Seismic Hazard Model.
A comparison of the 2017 USGS South America seismic hazard model and the 2010 USGS preliminary model was made to see how the models differ. The comparison was made as the ratio of PGA at 10% probability of exceedance in 50 years. The ratio map is included here as a geo-referenced tiff (GeoTIFF). The gridded data for the 2017 PGA at 10% probability can be found here, while the gridded data for the 2010 PGA at 10% probability can be found in the zip archive that can be downloaded using a link on this page.
Categories: Data;
Types: Citation,
Downloadable,
GeoTIFF,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Raster,
Shapefile;
Tags: Argentina,
Bolivia,
Brazil,
Chile,
Colombia,
Maximum considered earthquake geometric mean peak ground acceleration maps (MCEG) are for assessment of the potential for liquefaction and soil strength loss, as well as for determination of lateral earth pressures in the design of basement and retaining walls. The maps are derived from the USGS seismic hazard maps in accordance with the site-specific ground-motion procedures of the NEHRP Recommended Seismic Provisions for New Building and Other Structures and the ASCE Minimum Design Loads for Buildings and Other Structures (also known as the ASCE 7 Standard; ASCE, 2016). The MCEG ground motions are taken as the lesser of probabilistic and deterministic values, as explained in the Provisions. The gridded probabilistic...
Categories: Data;
Types: Citation,
Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Argentina,
Bolivia,
Brazil,
Chile,
Colombia,
A comparison of the 2017 USGS South America seismic hazard model and the Global Seismic Hazard Assessment Program (GSHAP) model was made to see how the models differ. The comparison was made as the ratio of PGA at 10% probability of exceedance in 50 years. The ratio map is included here as a geo-referenced tiff (GeoTIFF). The gridded data for the 2017 PGA at 10% probability can be found here, while the GSHAP data can be found here. Shedlock, K.M., Giardini, Domenico, Grünthal, Gottfried, and Zhang, Peizhan, 2000, The GSHAP Global Seismic Hazar Map, Sesimological Research Letters, 71, 679-686. https://doi.org/10.1785/gssrl.71.6.679
Categories: Data;
Types: Citation,
Downloadable,
GeoTIFF,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Raster,
Shapefile;
Tags: Argentina,
Bolivia,
Brazil,
Chile,
Colombia,
The crustal fault model accounts for earthquakes that occur on faults that have not ruptured recently, but have have been active in historic and prehistoric periods. Although hundreds of Quaternary faults have been mapped, only a few of these faults have been studied sufficiently to reach a consensus regarding rate of deformation that can be applied in this hazard assessment. Information regarding the seismogenic source geometry and seismogenic source behavior that is necessary to model each fault is included for each fault. Files that can be used as input to computer hazard code are included.
This data set represents the results of calculations of hazard curves for a grid of points with a spacing of 0.05 degrees in latitude and longitude. This particular data set is for horizontal spectral response acceleration for 1.0-second period with a 1 percent probability of exceedance in 1 year. The data are for the Western United States and are based on the long-term 2014 National Seismic Hazard Model.
Data from the geodetic network across Hawaii were used to model slip rates for décollement faults along the southern and western flanks of the Island of Hawai`i. Data for the observed and predicted GPS velocities at each station, the inverted slip rates along the décollements, as well as the coordinates defining the outline of the décollements are included below.
Categories: Data
These data represent the chance of experiencing potentially damaging ground shaking for fixed ground shaking levels that corresponds with Modified Mercalli Intensity (MMI) equal to VI, in 100 years. The values are obtained by averaging the annual frequency of exceedance of experiencing MMI VI based on a peak ground acceleration, and the annual frequency of exceedance of experiencing MMI VI based on 1.0-second spectral acceleration. This average annual frequency of exceedance is converted to a Poisson probability of damaging shaking with a 100-year return period.
Categories: Data
A seismic hazard model for South America, based on a smoothed (gridded) seismicity model, a subduction model, a crustal fault model, and a ground motion model, has been produced by the U.S. Geological Survey. These models are combined to account for ground shaking from earthquakes on known faults as well as earthquakes on un-modeled faults. This data set represents the results of calculations of hazard curves for a grid of points with a spacing of 0.1 degrees in latitude and longitude. This particular data set is for Modified Mercalli Intensity with a 50 percent probability of exceedance in 50 years. The maps and data were derived from PGA ground-motion conversions of Worden et al. (2012), and include soil amplification...
Categories: Data;
Types: Citation,
Downloadable,
GeoTIFF,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Raster,
Shapefile;
Tags: Argentina,
Bolivia,
Brazil,
Chile,
Colombia,
A seismic hazard model for South America, based on a smoothed (gridded) seismicity model, a subduction model, a crustal fault model, and a ground motion model, has been produced by the U.S. Geological Survey. These models are combined to account for ground shaking from earthquakes on known faults as well as earthquakes on un-modeled faults. This data set represents the results of calculations of hazard curves for a grid of points with a spacing of 0.1 degrees in latitude and longitude. This particular data set is for horizontal spectral response acceleration for 0.2-second period with a 2 percent probability of exceedance in 50 years.
Categories: Data;
Types: Citation,
Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Argentina,
Bolivia,
Brazil,
Chile,
Colombia,
A seismic hazard model for South America, based on a smoothed (gridded) seismicity model, a subduction model, a crustal fault model, and a ground motion model, has been produced by the U.S. Geological Survey. These models are combined to account for ground shaking from earthquakes on known faults as well as earthquakes on un-modeled faults. This data set represents the results of calculations of hazard curves for a grid of points with a spacing of 0.1 degrees in latitude and longitude. This particular data set is for peak ground acceleration with a 2 percent probability of exceedance in 50 years.
Categories: Data;
Types: Citation,
Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Argentina,
Bolivia,
Brazil,
Chile,
Colombia,
The subduction model accounts for large earthquakes (M 7–9.5) that occur on the subduction interface. The subduction zones along the northern and western coast of South America, the Panama deformation zones, and the Lesser Antilles subduction zone of the Caribbean are considered in the subduction model of this hazard assessment. The subduction interface of the Nazca plate beneath the western coast of South America has been separated into five zones, down to a depth of 50 km. The five zones are based on the locations of impinging subduction ridges, dimensions of large earthquakes, and fault complications. An alternative model for Chile (Medina et al., 2017) is applied to the Nazca subduction zones 3–5. This...
The b-value for the earthquake catalog from the Oklahoma-Kansas potentially induced earthquake zone is computed with the maximum likelihood method (MLE) (Aki, 1965). We use the minimum magnitude of completeness that is used for the seismicity rate models (Mc=2.7) and the earthquakes from 2016 and 2017 and find b=1.5 (1.48+/-0.05). However, we find that the b-value from the full (non-declustered) catalog is sensitive to the minimum magnitude of completeness, perhaps due to the moment magnitudes at these values being highly dependent on the conversion relations and the measurements of local magnitudes. Aki, K. (1965). Maximum likelihood estimate of b in the formula log N= a-bM and its confidence limits. Bull. Earthq....
|
|
