Filters: Types: Downloadable (X) > Tags: {"type":"Harvest Set"} (X) > Categories: pre-SM502.8 (X)
450 results (17ms)|
Filters
Date Range
Extensions Types Contacts
Categories Tags (with Type=Harvest Set ) |
Cell maps for each oil and gas assessment unit were created by the USGS to illustrate the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were...
Cell maps for each oil and gas assessment unit were created by the USGS as a method for illustrating the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 506501 = Chattanooga Shale/Floyd Shale-Paleozoic,
50650101 = Pre-Mississippian Carbonates Gas,
50650102 = Carboniferous Sandstones Oil and Gas,
506502 = Pottsville Coal,
50650281 = Black Warrior Basin Coalbed Gas,
Drilling-density cell maps show the number of wells that have been drilled into the storage assessment unit (SAU). Each 1-square-mile cell has a count for the number of unique well boreholes drilled into the SAU. For a given sedimentary basin, the USGS National Geologic CO2 Sequestration Assessment Project identifies SAUs containing the potential for storage and sequestration of carbon dioxide. Proprietary well header data from IHS ENERDEQ through 2010 were queried to determine which wells were drilled into specific SAUs. The coordinates of wells are proprietary and cannot be released; however, counts of the number of wells per square mile are presented in the well drilling density data layer.
This is a polygon coverage of the structure contours of the Calico sequence boundary in the Kaiparowits Plateau, southern Utah. Sequence boundary elevations are based on 166 drill sites. The Calico sequence boundary occurs from 50-100 ft below the base of the John Henry Member, therefore an inferred elevation of the sequence boundary was used at numerous locations along the outcrop where the John Henry Member was mapped. The outside polygon defines the base of the coal-bearing Calico and A-sequences of the Straight Cliffs Formation east of 112 degrees of longitude. The northern boundary is delineated by the Paunsaugunt fault and volcanic rocks of Tertiary age.
These are shapefiles and ARC/INFO polygon coverages showing the isopachs of total net coal in beds greater than or equal to 1.2' thick for the A through G coal zones, Danforth Hills coal field. The coverage danathkg is the isopach coverage for the A coal zone; danbthkg is for the B coal zone, and so on.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Colorado,
Colorado Plateau,
Colorado Plateau,
Colorado Plateau coal assessment study area,
Danforth Hills,
Net coal thickness isopachs, Ferris 23, 25, 31, 50 and 65 coal zones, Hanna Basin Wyoming (fer*catg)
These ArcView shapefiles contain representations of the net coal thickness in the Ferris 23, 25, 31, 50 and 65 coal zones in the Ferris coalfield, Hanna Basin, Wyoming. These datasets were created specifically for the National Coal Resource Assessment in the Northern Rocky Mountains and Great Plains Region.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Carbon County,
Coal,
Coal thickness,
Ferris 23 coal zone,
Ferris 23 study limit,
These ArcView shapefiles contain representations of the Hanna coal zone study limit boundaries in the Hanna coalfield, Hanna Basin, Wyoming. These shapefiles were created specifically for the National Coal Resource Assessment in the Northern Rocky Mountains and Great Plains Region.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Boundary,
Carbon County,
Coal,
Hanna 77 coal zone,
Hanna 77 study limit,
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
National Assessment of Oil and Gas Project - Wind River Basin Province (035) Total Petroleum Systems
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
These are shapefiles and coverages of final unioned polygon coverages used to calculate coal resources of the Cameo/Fairfield coal group east of 107 deg 15' longitude, and the Cameo/Wheeler, South Canyon, and Coal Ridge coal zones west of 107 deg 15' longitude in the southern Piceance Basin, northwestern Colorado. Pscbfing was used for the area east of 107 deg 15' longitude; pscwfing was used for the Cameo/Wheeler coal zone; psscfing was used for the South Canyon coal zone; pscrfing was used for the Coal Ridge coal zone. Polygons that make up the final unioned polygons include counties, 7.5' quadrangles, townships, surface and coal ownership, reliability, and, overburden. The final unioned coverage for each coal...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Colorado,
Colorado Plateau,
Colorado Plateau,
Crested Butte,
National Coal Resource Assessment (NCRA),
National Assessment of Oil and Gas Project - Sacramento Basin Province (009) Total Petroleum Systems
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 500901 = Dobbins-Forbes,
50090101 = Forbes, Kione and Older,
50090102 = Lower Princeton Canyon Fill and Northern Nonmarine,
500902 = Winters-Domengine,
50090201 = Late Cretaceous Deltaic and Submarine Fan,
An ESRI GRID raster data model of the overburden material above the Mahogany Zone was needed to perform calculations in the Piceance Basin, Colorado as part of a 2009 National Oil Shale Assessment.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: CO,
Colorado,
Earth science,
Economic geology,
Energy resources,
The digitally compiled map includes geology, oil and gas field centerpoints, and geologic provinces of the Arctic (North Pole area encircled by 640 N Latitude). The GIS data sets were designed originally in ESRI's ARC/INFO ver. 8.0.1 and were published as part of a series of interim CD-ROM products of the U.S. Geological Survey's World Energy Project (WEP). The goal of the WEP is to assess the undiscovered, technically recoverable oil and gas resources of the world. Results of this assessment were reported in the year 2000 (see USGS DDS-60; http://pubs.usgs.gov/dds/dds-060/).
This coverage includes arcs, polygons, and polygon labels that describe the generalized geologic age of surface outcrops of bedrock of Svalbard. It also includes shorelines.
This shapefile contains points that describe the location of hydrocarbon exploration and production wells drilled in Afghanistan; and hyperlinks to scanned images of well logs that can be viewed in an ArcReader project.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: AF,
Afghan-Tajik basin, Province 1156,
Amu Darya basin, Province 1154,
Development wells,
Earth Science,
The data set for this coverage includes arcs, polygons, and polygon labels that outline and describe the general geologic age and type of bedrock of the Arabian Peninsula and selected adjacent areas. It also includes shoreline and inland water bodies. The Arabian Peninsula is part of Region 2 for the USGS World Energy Assessment.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Anah Graben, Province 2089,
Arabian Peninsula,
Arabian Shield, Province 2101,
BA,
Bahrain,
This is a shapefile of the structure contours on top of the Pictured Cliffs Sandstone, San Juan Basin Colorado and New Mexicoa.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Archuleta County, CO,
Colorado,
Colorado Plateau,
Colorado Plateau,
La Plata County, CO,
This is a coverage of surface and Federal mineral ownership in the Powder River Basin area, Montana and Wyoming. This coverage is the combination of several ARC/INFO coverages and MOSS format files that were collected from the BLM, reformatted as needed, modified, and/or created by the USGS from hard copy BLM 1:100,000-scale surface and mineral management status maps. The Powder River Basin has the largest in-place coal resources of any field in the contiguous U.S. (Keystone, 1997), and produces over one-fourth of the Nation's total coal production (The Mining Record, 1997). In the Powder River Basin, very little of the surface is Federal land, yet almost all of the coal is Federally owned.
The USGS Central Region Energy Team assesses oil and gas resources of the United States. The onshore and State water areas of the United States comprise 71 provinces. Within these provinces, Total Petroleum Systems are defined and Assessment Units are defined and assessed. Each of these provinces is defined geologically, and most province boundaries are defined by major geologic changes. The Denver Basin Province is located in eastern Colorado, western Nebraska, southern South Dakota, and eastern Wyoming encompassing all or parts of Pueblo, El Paso, Crowley, Lincoln, Kit Carson, Elbert, Teller, Douglas, Jefferson, Denver, Arapahoe, Adams, Washington, Yuma, Morgan, Weld, Broomfield, Boulder, Larimer, Logan, Sedwick,...
The base of the Pittsburgh Coal bed and its stratigraphically (non-coal) equivalent horizon is used to subdivide Upper Pennsylvanian Series strata into the overlying Monongahela Group and the underlying Conemaugh Group in the Appalachian Basin coal region. This dataset depicts areas in which Pittsburgh coal resources were calculated and was obtained largely from published maps. Because different coal thickness criteria were used to delineate the line denoting known resources in Ohio versus West Virginia, an offset is observed at the State boundaries. This dataset is a polygon coverage of counties limited to the extent of the Pittsburgh coal bed resource areas. The file has been generalized from detailed coverages...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: ALLEGANY County MD,
ALLEGHENY County PA,
ARMSTRONG County PA,
ATHENS County OH,
Appalachians,
|
|
