Filters: Tags: {"scheme":"Common geographic areas"} (X) > partyWithName: Michaela R Johnson (X)
11 results (194ms)|
Filters
Date Range
Extensions Types
Contacts
Categories Tag Types Tags (with Scheme=Common geographic areas) |
Corescan© Hyperspectral Core Imager Mark III (HCI-III) system data were acquired for hand samples, and subsequent billets made from the hand samples, collected during the U.S. Geological Survey (USGS) 2014, 2015, and 2016 field seasons in the Nabesna area of the eastern Alaska Range. This area contains exposed porphyry deposits and hand samples were collected throughout the region in support of the HyMap imaging spectrometer survey (https://doi.org/10.5066/F7DN435W) (Kokaly and others, 2017a). The HCI-III system consists of three different components. The first is an imaging spectrometer which collects reflectance data with a spatial resolution of approximately 500 nanometers (nm) for 514 spectral channels covering...
This publication provides digital flight line data for a high-resolution horizontal magnetic gradient and radiometric survey over an area of southeast Missouri and western Illinois. The survey represents the first airborne geophysical survey conducted as part of the U.S. Geological Survey (USGS) Earth Mapping Resource Initiative (Earth MRI) effort (Day, 2019). Earth MRI is a cooperative effort between the USGS, the Association of American State Geologists, and other Federal, State, and private sector organizations to improve our knowledge of the geologic framework of the United States. Data for this survey were collected by Terraquest, Ltd. under contract with the USGS using a fixed wing aircraft with magnetometers...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Earth Mapping Resources Initiative,
EarthMRI,
GGGSC,
Geology, Geophysics, and Geochemistry Science Center,
Illinois,
Mineral predominance data were a derivative product from the Corescan© reflectance data. Corescan Hyperspectral Core Imager Mark III (HCI-III) system data were acquired for hand samples, and subsequent billets made from the hand samples, collected during the U.S. Geological Survey (USGS) 2014, 2015, and 2016 field seasons in the Nabesna area of the eastern Alaska Range. This area contains exposed porphyry deposits and hand samples were collected throughout the region in support of the HyMap imaging spectrometer survey (https://doi.org/10.5066/F7DN435W) (Kokaly and others, 2017a). The HCI-III system consists of three different components. The first is an imaging spectrometer which collects reflectance data with a...
Selected archived sample splits collected as part of the National Uranium Resource Evaluation (NURE) Hydrogeochemical and Stream Sediment Reconnaissance (HSSR) program, were reanalyzed by the U.S. Geological Survey (USGS) as part of a NURE-HSSR Reanalysis project (Smith and others, 2018). A small amount (approximately 0.25 grams [g]) of sieved less than 75-micron sample material was retrieved from the USGS National Geochemical Sample Archive for geochemical analysis. These samples were analyzed for 51 elements under a Technical Assistance Agreement with a third party by ALS Global laboratories using their ultra-trace four-acid-digestion dual-mode inductively coupled plasma-optical emission spectrometry/mass spectrometry...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Alaska,
DOE,
Economic Geology,
GGGSC,
Geochemistry,
Approximately 1,900 square kilometers of imagery were collected from July 14 to July 21, 2014 using a HyMap™ sensor (Cocks and others, 1998) mounted on a modified Piper Navajo aircraft. The survey area covered parts of the Wrangell and Nutzotin Mountains in the eastern Alaska Range near Nabesna, Alaska. The aircraft was flown at an altitude of approximately 5,050 meters (m) (3,480 m above the mean ground surface elevation of 1570 m) resulting in average ground spatial resolution of 6.7 m. HyMap measured reflected sunlight in 126 narrow channels that cover the wavelength region of 455 to 2,483 nanometers (nm). Data were delivered by the operators of the sensor (HyVista Corp., Australia) in units of radiance (Kokaly...
Categories: Data Release - Revised;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Alaska,
Alaska,
Alaska Range,
Bond Creek,
Canada,
Corescan© Hyperspectral Core Imager Mark III (HCI-III) system data were acquired for hand samples, and subsequent billets made from the hand samples, collected during the U.S. Geological Survey (USGS) 2014, 2015, and 2016 field seasons in the Nabesna area of the eastern Alaska Range. This area contains exposed porphyry deposits and hand samples were collected throughout the region in support of the HyMap imaging spectrometer survey (https://doi.org/10.5066/F7DN435W) (Kokaly and others, 2017a). The HCI-III system consists of three different components. The first is an imaging spectrometer which collects reflectance data with a spatial resolution of approximately 500 nanometers (nm) for 514 spectral channels covering...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Shapefile;
Tags: Alaska,
Alaska,
Alaska Range,
Bond Creek,
Canada,
Measurements of reference materials were made on the Corescan© HCI-III to evaluate the supplied channel wavelength positions and bandpass values. Wavelength position and bandpass of channels in a spectrometer, referred to as full-width half max (FWHM) in the contractor's documentation (Corescan_Product_MetaData_v3.pdf), are two fundamental spectral characteristics that need to be known in order to spectrally identify minerals by comparison to a spectral library, like the Material Identification and Characterization Algorithm (MICA) analysis used to generate the mineral predominance maps. Spectrometers with finer bandpass can reveal greater spectral detail that can be related to a material’s chemical composition...
Corescan© Hyperspectral Core Imager Mark III (HCI-III) system data were acquired for hand samples, and subsequent billets made from the hand samples, collected during the U.S. Geological Survey (USGS) 2014, 2015, and 2016 field seasons in the Nabesna area of the eastern Alaska Range. This area contains exposed porphyry deposits and hand samples were collected throughout the region in support of the HyMap imaging spectrometer survey (https://doi.org/10.5066/F7DN435W) (Kokaly and others, 2017a). The HCI-III system consists of three different components. The first is an imaging spectrometer which collects reflectance data with a spatial resolution of approximately 500 nanometers (nm) for 514 spectral channels covering...
Corescan© Hyperspectral Core Imager Mark III (HCI-III) system data were acquired for hand samples, and subsequent billets made from the hand samples, collected during the U.S. Geological Survey (USGS) 2014, 2015, and 2016 field seasons in the Nabesna area of the eastern Alaska Range. This area contains exposed porphyry deposits and hand samples were collected throughout the region in support of the HyMap imaging spectrometer survey (https://doi.org/10.5066/F7DN435W) (Kokaly and others, 2017). The HCI-III system consists of three different components. The first is an imaging spectrometer which collects reflectance data with a spatial resolution of approximately 500 nanometers (nm) for 514 spectral channels covering...
Corescan© Hyperspectral Core Imager Mark III (HCI-III) system data were acquired for hand samples, and subsequent billets made from the hand samples, collected during the U.S. Geological Survey (USGS) 2014, 2015, and 2016 field seasons in the Nabesna area of the eastern Alaska Range. The HCI-III system consists of three different components. The first is an imaging spectrometer which collects reflectance data with a spatial resolution of approximately 500 nanometers (nm) for 514 spectral channels covering the 450-2,500 nm wavelength range of the electromagnetic spectrum (Martini and others, 2017). The second is a spectrally calibrated RGB camera that collects high resolution imagery of the samples with a 50 micrometer...
White mica wavelength position data were a derivative dataset produced from Corescan© reflectance data. Corescan Hyperspectral Core Imager Mark III (HCI-III) system data were acquired for hand samples, and subsequent billets made from the hand samples, collected during the U.S. Geological Survey (USGS) 2014, 2015, and 2016 field seasons in the Nabesna area of the eastern Alaska Range. This area contains exposed porphyry deposits and hand samples were collected throughout the region in support of the HyMap imaging spectrometer survey (https://doi.org/10.5066/F7DN435W) (Kokaly and others, 2017a). The HCI-III system consists of three different components. The first is an imaging spectrometer which collects reflectance...
|
|
