Skip to main content
Advanced Search

Filters: Tags: ASCII (X) > Date Range: {"choice":"year"} (X) > partyWithName: Water Resources (X)

22 results (12ms)   

View Results as: JSON ATOM CSV
thumbnail
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The elevation contour data was created based on bathymetry obtained in the meander reach collected in about a one month period extending from 6/3/2010 - 6/19/2010. This subset data extends from river kilometer designator 228 upstream to 237. Similar methods used to collect and process the bathymetry are described in Fosness (2013). The contours were created from a surface raster (also referred to as digital elevation model) of the...
thumbnail
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. In 2009, the Kootenai Tribe of Idaho released and implemented the Kootenai River Habitat Restoration Master Plan. This plan aimed to restore, enhance, and maintain the Kootenai River habitat and landscape to support and sustain habitat conditions for aquatic species and animal populations. In support of these restoration efforts, the U.S. Geological Survey, in cooperation with the Kootenai Tribe of Idaho, conducted high-resolution...
thumbnail
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The surficial bed-sediment facies, herein after referred to as the sediment facies, quantitatively describes the dominant sediment substrate on the surface of the river bed. Sediment facies categories were based on the grain size distribution of Wentworth (1922) which included the following ranges or combination of ranges: gravel (2-64mm), sand (0.063-2mm) and silt/clay (less than 0.063mm). An underwater video monitoring system UVMS...
thumbnail
A bathymetric survey of Nimrod Lake, Arkansas, was conducted in late April to mid-May, 2016, by the Lower Mississippi-Gulf Water Science Center (LMG WSC) of the U.S. Geological Survey (USGS) using methodologies for sonar surveys similar to those described by Wilson and Richards (2006) and Richards and Huizinga (2018). Point data from the bathymetric survey were merged with point data from an aerial LiDAR survey conducted in December, 2010, that were provided by the U.S. Army Corps of Engineers (USACE), Little Rock District. From the combined point dataset, a terrain dataset (a type of triangulated irregular network, or TIN, model) was created in Esri ArcGIS, version 10.5, for the area within the approximate extent...
thumbnail
These data are high-resolution bathymetry (riverbed elevation) and depth-averaged velocities in ASCII format, generated from hydrographic and velocimetric surveys near highway bridge structures over the Missouri River between Kansas City and St. Louis, Missouri, for dates ranging from 2010 to 2017. Hydrographic data were collected using a high-resolution multibeam echosounder mapping system (MBMS), which consists of a multibeam echosounder (MBES) and an inertial navigation system (INS) mounted on a marine survey vessel. Data were collected as the vessel traversed the river along planned survey lines distributed throughout the reach. Data collection software integrated and stored the depth data from the MBES and...
thumbnail
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The major clay step features are defined as having a vertical face that is greater than 1.5 meters. The clay step features were qualitately identified using an underwater video monitoring sysyem. The extent and magnitude of the clay steps were mapped using a muliteam bathymetric echosounder system.
thumbnail
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. In 2009, the Kootenai Tribe of Idaho released and implemented the Kootenai River Habitat Restoration Master Plan. This plan aimed to restore, enhance, and maintain the Kootenai River habitat and landscape to support and sustain habitat conditions for aquatic species and animal populations. In support of these restoration efforts, the U.S. Geological Survey, in cooperation with the Kootenai Tribe of Idaho, conducted high-resolution...
thumbnail
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The surficial bed-sediment facies, herein after referred to as the sediment facies, quantitatively describes the dominant sediment substrate on the surface of the river bed. Sediment facies categories were based on the grain size distribution of Wentworth (1922) which included the following ranges or combination of ranges: gravel (2-64mm), sand (0.063-2mm) and silt/clay (less than 0.063mm). An underwater video monitoring system UVMS...
thumbnail
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. Hydrographic survey data were collected from May 22 through June 10, 2015, using an acoustic Doppler current profiler (ADCP) coupled with an RTK-GNSS rover. The collected hydrographic data consisted of three elements—riverbed elevations derived from bathymetry, depth-averaged streamflow velocity, and instantaneous discharge measurements. Hydrographic data were collected as the boat moved across the river at planned cross sections...
thumbnail
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. An Acoustic Doppler Current Profiler (ADCP) was used to survey streamflow characteristics including total streamflow, velocity magnitude and secondary flow structure, and backscatter intensity at 29 cross-sections at the Myrtle Creek Bend on the Kootenai River on June 1, 2012. Each of the 29 cross-sections consisted of 4 transects or bank-to-bank coverage to obtain a representative velocity pattern. The mean daily streamflow was...
thumbnail
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The major clay step features are defined as having a vertical face that is greater than 1.5 meters. The clay step features were qualitately identified using an underwater video monitoring sysyem. The extent and magnitude of the clay steps were mapped using a muliteam bathymetric echosounder system.
thumbnail
These data are high-resolution bathymetry (riverbed elevation) and depth-averaged velocities in ASCII format, generated from hydrographic and velocimetric surveys near highway bridge structures over the Missouri and Mississippi Rivers near St. Louis, Missouri, for dates ranging from 2008 to 2016. Hydrographic data were collected using a high-resolution multibeam echosounder mapping system (MBMS), which consists of a multibeam echosounder (MBES) and an inertial navigation system (INS) mounted on a marine survey vessel. Data were collected as the vessel traversed the river along planned survey lines distributed throughout the reach. Data collection software integrated and stored the depth data from the MBES and the...
thumbnail
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. In 2009, the Kootenai Tribe of Idaho released and implemented the Kootenai River Habitat Restoration Master Plan. This plan aimed to restore, enhance, and maintain the Kootenai River habitat and landscape to support and sustain habitat conditions for aquatic species and animal populations. In support of these restoration efforts, the U.S. Geological Survey, in cooperation with the Kootenai Tribe of Idaho, conducted high-resolution...
thumbnail
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The minor clay step features are defined as having a vertical face that is less than or equal to 1.5 meters. The clay step features were qualitately identified using an underwater video monitoring sysyem. The extent and magnitude of the clay steps were mapped using a muliteam bathymetric echosounder system.
thumbnail
A bathymetric survey of Dierks Lake, Arkansas, was conducted in late June - early July 2018 by the Lower Mississippi-Gulf Water Science Center of the U.S. Geological Surveys using methodologies for sonar surveys similar to those described by Wilson and Richards (2006) and Richards and Huizinga (2018). Data from the bathymetric survey were combined with data from an aerial Light Detection And Ranging (LiDAR) survey conducted in 2016 by the National Resources Conservation Service (U.S. Geological Survey, 2017) to create a digital elevation model (DEM) of the extent of the flood pool of the lake and compute volume (storage capacity) of the lake at 1-foot increments in water surface elevation from 444-557 feet (ft)...
thumbnail
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. Topographic survey data were collected along planned lines from the river water surface to the top of the bank in the study area. Topographic survey data collection began on May 22 and concluded on June 10, 2014. A real-time kinematic (RTK) GNSS network provided real-time survey grade horizontal and vertical positioning.
thumbnail
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The minor clay step features are defined as having a vertical face that is less than or equal to 1.5 meters. The clay step features were qualitately identified using an underwater video monitoring sysyem. The extent and magnitude of the clay steps were mapped using a muliteam bathymetric echosounder system.
thumbnail
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The shaded relief raster data was created based on bathymetry obtained in the meander reach collected in about a one month period extending from 6/3/2010 - 6/19/2010. This subset data extends from river kilometer designator 228 upstream to 237. Similar methods used to collect and process the bathymetry are described in Fosness (2013). The shaded relief was created from a surface raster (also referred to as digital elevation model)...
thumbnail
These data are high-resolution bathymetry (riverbed elevation) and depth-averaged velocities in ASCII format, generated from hydrographic and velocimetric surveys near highway bridge structures over the Missouri and Mississippi Rivers on the periphery of Missouri, for dates ranging from 2008 to 2018. Hydrographic data were collected using a high-resolution multibeam echosounder mapping system (MBMS), which consists of a multibeam echosounder (MBES) and an inertial navigation system (INS) mounted on a marine survey vessel. Data were collected as the vessel traversed the river along planned survey lines distributed throughout the reach. Data collection software integrated and stored the depth data from the MBES and...
thumbnail
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. Hydrographic survey data were collected from May 22 through June 10, 2015, using an acoustic Doppler current profiler (ADCP) coupled with an RTK-GNSS rover. The collected hydrographic data consisted of three elements—riverbed elevations derived from bathymetry, depth-averaged streamflow velocity, and instantaneous discharge measurements. Hydrographic data were collected as the boat moved across the river at planned cross sections...


map background search result map search result map Bathymetry and Velocity Data from Surveys at Highway Bridges crossing the Missouri and Mississippi Rivers near St. Louis, Missouri, October 2008 through May 2016 Bathymetry and Storage Capacity of Nimrod Lake, Arkansas Bathymetry and Storage Capacity of Dierks Lake, Arkansas Bathymetry and Velocity Data from Surveys at Highway Bridges crossing the Missouri River between Kansas City and St. Louis, Missouri, January 2010 through May 2017 Bathymetry and Velocity Data from Surveys at Highway Bridges crossing the Missouri and Mississippi Rivers on the Periphery of Missouri, December 2008 through August 2018 Braided Reach Cross-Section Monitoring Surveys, Kootenai River near Bonners Ferry, Idaho, 2011 Multibeam Echosounding Survey in Meander Reach, Kootenai River near Bonners Ferry, Idaho - Water Year 2011 Substrate Enhancement Project near Shorty's Island and Myrtle Creek, Kootenai River near Bonners Ferry, Idaho - Water Year 2011 Acoustic Doppler Current Profiling near Shorty's Island, June 1, 2012, Kootenai River near Bonners Ferry, ID Elevation Contours of the Bathymetry near Shorty's Island and Myrtle Bend, Koootenai River near Bonners Ferry, ID, 2010 Major Clay Step features near Myrtle Bend on the Kootenai River near Bonners Ferry, ID Major Clay Step features near Shorty's Island on the Kootenai River near Bonners Ferry, ID Minor Clay Step features near Myrtle Bend on the Kootenai River near Bonners Ferry, ID Minor Clay Step features near Shorty's Island on the Kootenai River near Bonners Ferry, ID Shaded Relief of the Bathymetry near Shorty's Island and Myrtle Bend, 2010, Kootenai River near Bonners Ferry, ID Surficial Sediment Facies features near the Myrtle Bend Confluence with the Kootenai River near Bonners Ferry, ID Surficial Sediment Facies features near Shorty's Island on the Kootenai River near Bonners Ferry, ID Bathymetric Survey Data for the São Francisco River near Torrinha, Bahia, Brazil, 2014 Topographic Survey Data for the São Francisco River near Torrinha, Bahia, Brazil, 2014 Depth Averaged Streamflow Velocity Data for the São Francisco River near Torrinha, Bahia, Brazil, 2014 Major Clay Step features near Shorty's Island on the Kootenai River near Bonners Ferry, ID Major Clay Step features near Myrtle Bend on the Kootenai River near Bonners Ferry, ID Minor Clay Step features near Myrtle Bend on the Kootenai River near Bonners Ferry, ID Surficial Sediment Facies features near the Myrtle Bend Confluence with the Kootenai River near Bonners Ferry, ID Acoustic Doppler Current Profiling near Shorty's Island, June 1, 2012, Kootenai River near Bonners Ferry, ID Minor Clay Step features near Shorty's Island on the Kootenai River near Bonners Ferry, ID Surficial Sediment Facies features near Shorty's Island on the Kootenai River near Bonners Ferry, ID Substrate Enhancement Project near Shorty's Island and Myrtle Creek, Kootenai River near Bonners Ferry, Idaho - Water Year 2011 Elevation Contours of the Bathymetry near Shorty's Island and Myrtle Bend, Koootenai River near Bonners Ferry, ID, 2010 Shaded Relief of the Bathymetry near Shorty's Island and Myrtle Bend, 2010, Kootenai River near Bonners Ferry, ID Braided Reach Cross-Section Monitoring Surveys, Kootenai River near Bonners Ferry, Idaho, 2011 Bathymetric Survey Data for the São Francisco River near Torrinha, Bahia, Brazil, 2014 Depth Averaged Streamflow Velocity Data for the São Francisco River near Torrinha, Bahia, Brazil, 2014 Topographic Survey Data for the São Francisco River near Torrinha, Bahia, Brazil, 2014 Bathymetry and Storage Capacity of Dierks Lake, Arkansas Bathymetry and Velocity Data from Surveys at Highway Bridges crossing the Missouri and Mississippi Rivers near St. Louis, Missouri, October 2008 through May 2016 Bathymetry and Velocity Data from Surveys at Highway Bridges crossing the Missouri River between Kansas City and St. Louis, Missouri, January 2010 through May 2017 Bathymetry and Velocity Data from Surveys at Highway Bridges crossing the Missouri and Mississippi Rivers on the Periphery of Missouri, December 2008 through August 2018