Filters: Tags: Coalbed methane resources (X) > partyWithName: U.S. Geological Survey - CERSC Data Management Services Project (X)
135 results (13ms)|
Filters
Date Range
Extensions Types Contacts
Categories Tag Types Tag Schemes |
The depth to top of the Wilcox Group is contoured from location and top information derived from the Petroleum Information (PI) Wells database. The depth to Wilcox map represents the tops found in the database with the addition of surface geology from USGS maps and field data. The veracity of the PI Wells database is being checked by comparison to published cross sections and geologic maps. Interpretation of the depth to Wilcox and apparent thickness maps along with published measured sections and cross sections indicates that portions of Texas, Louisiana, Mississippi and Alabama contain broad areas where a 20 to 40 foot net thickness of lignite and coal occur at shallow depths. The thicker coal zones are attributed...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 47 = Western Gulf,
48 = East Texas Basin,
49 = Louisiana-Mississippi Salt Basins,
50 = Florida Peninsula,
AL,
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 41 = Raton Basin-Sierra Grande Uplift Province,
504101 = Upper Cretaceous-Tertiary Coalbed Gas,
50410101 = Upper Cretaceous-Tertiary Sandstones,
50410181 = Raton Coalbed Gas,
50410182 = Vermejo Coalbed Gas,
The USGS Central Region Energy Team assesses oil and gas resources of the United States. The onshore and State water areas of the United States comprise 71 provinces. Within these provinces, Total Petroleum Systems are defined and Assessment Units are defined and assessed. Each of these provinces is defined geologically, and most province boundaries are defined by major geologic changes. The Wyoming Thrust Belt Province is located in southeastern Idaho, north central Utah, and southwestern Wyoming, encompassing all or parts of Bannock, Bear Lake, Bingham, Bonneville, Caribou, Franklin, Jefferson, Madison, and Teton Counties in Idaho and all or parts of Box Elder, Cache, Davis, Morgan, Rich, Salt Lake, Summit, and...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 36 = Wyoming Thrust Belt,
50200101 = Thrust Belt Conventional,
50200281 = Frontier-Adaville-Evanstone Coalbed Gas,
503601 = Mowry Composite,
503602 = Frontier-Adaville-Evanston Coalbed Gas,
The USGS Central Region Energy Team assesses oil and gas resources of the United States. The onshore and State water areas of the United States comprise 71 provinces. Within these provinces, Total Petroleum Systems are defined and Assessment Units are defined and assessed. Each of these provinces is defined geologically, and most province boundaries are defined by major geologic changes. The Wind River Basin Province is located in central Wyoming, encompassing all or parts of Hot Springs,Fremont, and Natrona Counties. The main population centers within the study area are Casper, Riverton, and Thermopolis, Wyoming. The main highway, I-25 traverses the area to the east of the study area from north to south. The Wind...
https://www.ig.utexas.edu/research/projects/gbds/gbds.htm. For more information and discussion of the various depositional systems the user is referred to Galloway and others
This dataset shows estimated depth ranges to stratigraphic horizons near the base of the Mesaverde Total Petroleum System, Uinta-Piceance Province, northwestern Colorado and northeastern Utah. The structural horizons used for depth estimates include the top of the Blackhawk Formation (western Uinta Basin), top of the lower Castlegate Sandstone (central and eastern Uinta Basin), and the top of the Rollins and Trout Creek Sandstone Members of the Iles Formation in the Piceance Basin.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 502001 = Ferron Coal/Wasatch Plateau,
50200101 = Conventional Ferron Sandstone Gas,
50200161 = Deep (6,000 feet plus) Coal and Sandstone Gas,
50200181 = Northern Coal Fairway/Drunkards Wash,
50200182 = Central Coal Fairway/Buzzards Bench,
The USGS Central Region Energy Team assesses oil and gas resources of the United States. The onshore and State water areas of the United States comprise 71 provinces. Within these provinces, Total Petroleum Systems are defined and Assessment Units are defined and assessed. Each of these provinces is defined geologically, and most province boundaries are defined by major geologic changes. The Illinois Basin Province is located in portions of Kentucky, Illinois, Indiana, Missouri, and Tennessee. The main population centers within the study area are Louisville, Kentucky; Peoria and Springfield Illinois; Indianapolis, Indiana; Saint Louis, Missouri; and Nashville, Tennessee. The main interstates, I-80, I-70, and I-40,...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 506401 = Precambrian to Cambrian,
50640101 = Precambrian to Cambrian Rift-Fill,
50640102 = Cambrian Mount Simon to Eau Claire,
50640103 = Cambrian to Ordovician Knox Group,
506402 = Ordovician Ancell Maquoketa,
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 505001 = South Florida Basin Sunniland-Dollar Bay,
50500101 = Lower Cretaceous Shoal-Reef Oil,
505002 = South Florida Basin Pre-Punta Gorda,
50500201 = Pre-Punta Gorda Dolomite Gas and Oil Hypothetical,
Assessment Unit,
The structure contours were created using biostratigraphic data in the Paleo-Data, Inc., Tenroc Regional Geologic Database. The depths of the microfossil locations were associated with the wells data provided by the Louisiana Department of Natural Resources. Because of the proprietary nature of the Tenroc database, no actual data can be shown and only those data points contained in the Louisiana State wells database are included in the control points layer. Contouring was accomplished in Dynamic Graphics, Inc., EarthVision modeling software (v.5) using minimum tension gridding. Three custom programs were used to convert contour lines generated from grids in EarthVision to Arc/Info coverages and then to shapefiles....
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Coal,
Coalbed Methane,
Coalbed methane resources,
Contours,
Earth Science,
The Pod (or pods) of Mature Source Rock is a critical element of the Total Petroleum System and incorporates all source rocks that potentially have generated hydrocarbons within the system. The Pod(s) of Mature Source Rock is shown here as a geographic boundary defined and mapped by the geologist responsible for the province, and incorporates the known limit of thermally mature, organic-rich source rock(s) that is responsible for generating and expelling discovered and undiscovered petroleum accumulations, shows, or seeps within the Total Petroleum System. The Pod(s) of Mature Source Rock boundary was mapped by the province geologist after studying the extent of the source rock facies and the temperature and burial...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 502001 = Ferron Coal/Wasatch Plateau,
50200101 = Conventional Ferron Sandstone Gas,
50200161 = Deep (6,000 feet plus) Coal and Sandstone Gas,
50200181 = Northern Coal Fairway/Drunkards Wash,
50200182 = Central Coal Fairway/Buzzards Bench,
Cell maps for each oil and gas assessment unit were created by the USGS as a method for illustrating the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 41 = Raton Basin-Sierra Grande Uplift Province,
504101 = Upper Cretaceous-Tertiary Coalbed Gas,
50410101 = Upper Cretaceous-Tertiary Sandstones,
50410181 = Raton Coalbed Gas,
50410182 = Vermejo Coalbed Gas,
This shapefile includes arcs and polygons that describe U.S. Geological Survey defined geologic provinces of the World. Each province has a set of geologic characteristics distinguishing it from surrounding provinces. These characteristics may include the dominant lithologies, the age of the strata, and the structural style. Some provinces include multiple genetically-related basins. Offshore province boundaries are generally defined by the 2000 meter bathymetric contour, but where appropriate are defined by the 4000 meter bathymetric contour. In some cases province boundaries are delineated by political boundaries, as in the case of The United States and Canada, because United States petroleum resources were assessed...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 2000assessment,
Asia Pacific,
Central and South America,
Coalbed methane resources,
Economic geology,
Cell maps for each oil and gas assessment unit were created by the USGS as a method for illustrating the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the...
|
|
