Skip to main content
Advanced Search

Filters: Tags: Water Availability and Use Science Program (X)

43 results (119ms)   

View Results as: JSON ATOM CSV
thumbnail
Airborne electromagnetic (AEM), magnetic, and radiometric data were acquired November 2018 to February 2019 along 16,816 line-kilometers (line-km) over the Mississippi Alluvial Plain (MAP). Data were acquired by CGG Canada Services, Ltd. with three different helicopter-borne sensors: the CGG Canada Services, Ltd. Resolve frequency-domain AEM instrument that is used to map subsurface geologic structure at depths up to 100 meters, depending on the subsurface resistivity; a Scintrex CS-3 cesium vapor magnetometer that detects changes in deep (hundreds of meters to kilometers) geologic structure based on variations in the magnetic properties of different formations; and a Radiation Solutions RS-500 spectrometer that...
The Mississippi Alluvial Plain (MAP) has become one of the most important agricultural regions in the US, and it relies heavily on a groundwater system that is poorly understood and shows signs of substantial change. The heavy use of the available groundwater resources has resulted in significant groundwater-level declines and reductions in base flow in streams within the MAP. These impacts are limiting well production and threatening future water-availability for the region. This product will help not only scientists in our center, but also at a national level. This product will also be part of a larger study encompassing the Mississippi Alluvial Plain region. The Mississippi Alluvial Plain extent was delineated...
thumbnail
Airborne electromagnetic (AEM), magnetic, and radiometric data were acquired November 2019 to March 2020 along 24,030 line-kilometers (line-km) over the Mississippi Alluvial Plain (MAP). Data were acquired by CGG Canada Services, Ltd. with three different airborne sensors: the CGG Canada Services, Ltd. TEMPEST time-domain AEM instrument that is used to map subsurface geologic structure at depths up to 300 meters (m), depending on the subsurface resistivity; a Scintrex CS-3 cesium vapor magnetometer that detects changes in deep (hundreds of meters to kilometers) geologic structure based on variations in the magnetic properties of different formations; and a Radiation Solutions RS-500 spectrometer that detects the...
Categories: Data; Types: Downloadable, Map Service, OGC WFS Layer, OGC WMS Layer, Shapefile; Tags: Arkansas, Arkansas River, GGGSC, Geology, Geophysics, and Geochemistry Science Center, Geophysics, All tags...
thumbnail
Airborne geophysical surveys were acquired in March 2018 and May 25 through August 7, 2021 using a helicopter-based platform. These surveys were collected along 10,706 line-kilometers (line-km) within selected areas of the Mississippi Alluvial Plain (MAP) and the Chicot Aquifer System in the southeastern United States. The airborne geophysical surveys include electromagnetic, magnetic, and radiometric sensor data collected in rivers and levees throughout the two areas to evaluate groundwater and surface-water interaction, riverine ecosystems, and infrastructure. This data release contains three child items that provide: Minimally processed (raw) data supplied by the airborne contractor (Xcalibur Multiphysics)...
Categories: Data; Types: Downloadable, Map Service, OGC WFS Layer, OGC WMS Layer, Shapefile; Tags: "Geomorphology"], "Hydrology", "Sedimentology", "Stratigraphy", "Water Resources", All tags...
thumbnail
A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric surface map for 2016 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...
Groundwater is an often overlooked freshwater resource compared to surface water, but groundwater is used widely across the United States, especially during periods of drought. If groundwater models can successfully simulate past conditions, they may be used to evaluate potential future pumping scenarios or climate conditions, thus providing a valuable planning tool for water-resource managers. Quantifying the groundwater-use component for a groundwater model is a vital but often challenging endeavor. This dataset includes groundwater withdrawal rates modeled for the Ozark Plateaus aquifer system (Ozark system) from 1900 to 2010 by groundwater model cell (2.6 square kilometers) for five water-use divisions: agriculture...
thumbnail
A hydrogeologic framework of the Ozark Plateaus aquifer system was constructed as the base for a groundwater flow model developed as part of the U.S. Geological Survey Water Availability and Use Science Program to aid in the understanding of groundwater availability in select aquifer systems of the United States. The Ozark Plateaus aquifer system study area (hereinafter referred to as the “Ozark system”) is nearly 70,000 square miles and includes parts of Arkansas, Kansas, Missouri, and Oklahoma. A hydrogeologic framework was constructed to represent the altitudes and thicknesses of nine hydrogeologic units within the Ozark Plateaus aquifer system - . the Western Interior Plains confining system, Springfield Plateau...
thumbnail
Note: this data release has been deprecated. Please see new data release here: https://doi.org/10.5066/P9PEFY11. The U.S. Geological Survey (USGS) undertook a 5-year study beginning in 2016 to assess groundwater availability for the aquifers proximal to the Gulf of Mexico from the Texas-Mexico border to the western part of the panhandle of Florida; these aquifers are collectively referred to as the coastal lowlands aquifer system. This study is one of several regional groundwater availability studies being done as part of the USGS Water Availability and Use Science Program. Groundwater from the coastal lowlands aquifer system is used mainly for public, irrigation, and industrial supply. Land-surface subsidence...
thumbnail
Site data contained in the ScrIntrvls_AllSrcRefs_AllWellsRev.csv dataset define the top and bottom altitudes of well screens in 64,763 irrigation wells completed in the Mississippi River Valley alluvial aquifer (MRVA) that constitute a production zone in the Mississippi Alluvial Plain (MAP) extending across the midwestern and southern United States from Illinois to Louisiana. Each well entry contains an Enumerated Domain Value of the Attribute Label SrcRefNo to identify the state environmental agency that contributed to the database, and enumerated values are associated with specific state agencies by using the Enumerated Domain Value Definition. Screen-top and -bottom altitudes and land surface are referenced (corrected)...
thumbnail
A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric surface map for 2016 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...
Electrical resistivity results from two regional airborne electromagnetic (AEM) surveys (Minsley et al. 2021 and Burton et al. 2021) over the Mississippi Alluvial Plain (MAP) were combined by the U.S. Geological Survey to produce three-dimensional (3D) gridded models and derivative hydrogeologic products. Grids were discretized in the horizontal dimension to align with the 1 kilometer (km) x 1 km National Hydrogeologic Grid (NHG; Clark et al. 2018), and vertically discretized into both 5 meter (m) depth slices and 5 m elevation slices. Ten “facies classes” were defined to categorize materials expected to have similar hydrologic and geologic properties based on their electrical resistivity (i.e. low classes correspond...
thumbnail
A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric surface map for 2016 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...
Electrical resistivity results from two regional airborne electromagnetic (AEM) surveys (Minsley et al. 2021, and Burton et al. 2021) over the Mississippi Alluvial Plain (MAP) were combined by the U.S. Geological Survey to produce three-dimensional (3D) gridded models and derivative hydrogeologic products. The 3D elevation grid was used to quantify across the MAP region 1) the occurrence and thickness of surficial (< 15 meter (m) depth) confining material, 2) the top and bottom elevation corresponding to the surficial confining material, and 3) a metric representing the degree of surface confinement or connectivity that ranges from fully confining conditions to high potential hydrologic connectivity. These products...
thumbnail
The Mississippi Alluvial Plain (MAP) has become one of the most important agricultural regions in the US, and it relies heavily on a groundwater system that is poorly understood and shows signs of substantial change. The heavy use of the available groundwater resources has resulted in significant groundwater-level declines and reductions in base flow in streams within the MAP. These impacts are limiting well production and threatening future water-availability for the region. This product will help not only scientists in our center, but also at a national level. This product will also be part of a larger study encompassing the Mississippi Alluvial Plain region. The Mississippi Alluvial Plain extent was delineated...
thumbnail
A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric surface map for 2016 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...
thumbnail
A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric surface map for 2016 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...
Airborne electromagnetic (AEM), magnetic, and radiometric data were acquired November 2018 to February 2019 along 16,816 line-kilometers (line-km) over the Mississippi Alluvial Plain (MAP). Data were acquired by CGG Canada Services, Ltd. with three different helicopter-borne sensors: the CGG Canada Services, Ltd. Resolve frequency-domain AEM instrument that is used to map subsurface geologic structure at depths up to 100 meters, depending on the subsurface resistivity; a Scintrex CS-3 cesium vapor magnetometer that detects changes in deep (hundreds of meters to kilometers) geologic structure based on variations in the magnetic properties of different formations; and a Radiation Solutions RS-500 spectrometer that...
Categories: Data; Types: Downloadable, Map Service, OGC WFS Layer, OGC WMS Layer, Shapefile; Tags: Arkansas, Bayou Bartholomew, Bayou Meto, Boeuf River, Cache River, All tags...
thumbnail
A hydrogeologic framework of the Ozark Plateaus aquifer system was constructed as the base for a groundwater flow model developed as part of the U.S. Geological Survey Water Availability and Use Science Program to aid in the understanding of groundwater availability in select aquifer systems of the United States. The Ozark Plateaus aquifer system study area (hereinafter referred to as the “Ozark system”) is nearly 70,000 square miles and includes parts of Arkansas, Kansas, Missouri, and Oklahoma. A hydrogeologic framework was constructed to represent the altitudes and thicknesses of nine hydrogeologic units within the Ozark Plateaus aquifer system - . the Western Interior Plains confining system, Springfield Plateau...
thumbnail
Airborne electromagnetic (AEM), magnetic, and radiometric data were acquired November 2018 to February 2019 along 16,816 line-kilometers (line-km) over the Mississippi Alluvial Plain (MAP). Data were acquired by CGG Canada Services, Ltd. with three different helicopter-borne sensors: the CGG Canada Services, Ltd. Resolve frequency-domain AEM instrument that is used to map subsurface geologic structure at depths up to 100 meters, depending on the subsurface resistivity; a Scintrex CS-3 cesium vapor magnetometer that detects changes in deep (hundreds of meters to kilometers) geologic structure based on variations in the magnetic properties of different formations; and a Radiation Solutions RS-500 spectrometer that...
thumbnail
Airborne electromagnetic (AEM), magnetic, and radiometric data were acquired November 2019 to March 2020 along 24,030 line-kilometers (line-km) over the Mississippi Alluvial Plain (MAP). Data were acquired by CGG Canada Services, Ltd. with three different airborne sensors: the CGG Canada Services, Ltd. TEMPEST time-domain AEM instrument that is used to map subsurface geologic structure at depths up to 300 meters (m), depending on the subsurface resistivity; a Scintrex CS-3 cesium vapor magnetometer that detects changes in deep (hundreds of meters to kilometers) geologic structure based on variations in the magnetic properties of different formations; and a Radiation Solutions RS-500 spectrometer that detects the...