Skip to main content
Advanced Search

Filters: Tags: Will County (X) > Categories: Data (X)

17 results (52ms)   

View Results as: JSON ATOM CSV
thumbnail
These data were collected using a 1200 kHz TRDI Rio Grande acoustic Doppler current profiler (ADCP) in mode 12 with 25 centimeter bins from a moving boat. The data were georeferenced with a Hemisphere Crescent A100 differential Global Positioning System (GPS) receiver with submeter accuracy. The data have been depth-averaged over the entire measured portion of the water column and temporally averaged over 5-second intervals to reduce noise. These data were collected by the U.S. Geological Survey (USGS) concurrently with environmental DNA (eDNA) sampling in this reach of the Chicago Sanitary and Ship Canal (CSSC) by the U.S. Fish and Wildlife Service (USFWS). Data were processed using the Velocity Mapping Toolbox...
thumbnail
Water velocities and discharge were measured in the lock chamber and immediately downstream of Brandon Road Lock on the Des Plaines River at river mile 286 on December 9-10, 2014 using Teledyne RDI Rio Grande 600 and 1200 kHz acoustic Doppler current profilers (ADCP). The data were georeferenced with a differential GPS receiver with submeter accuracy. These ADCP measurements were collected in support of the US Army Corps of Engineers Great Lakes and Mississippi River Interbasin Study (GLMRIS). Velocity measurements were processed using the Velocity Mapping Toolbox (Parsons and others, 2013) to derive temporally- and spatially-averaged water velocity values. Discharge measurements were processed with the QRev discharge...
thumbnail
Remote sensing technologies, such as high-resolution sonar, can be used to collect more detailed information about the benthic and water column characteristics of macro habitats in the Illinois River. Multibeam echosounders (MBES) collect multibeam and sidescan simultaneously, providing high-resolution images of the riverbed. Sidescan images, in raster format, show the recorded intensity of acoustic signal returns from the riverbed. The acoustic data were collected from the main and side channels (where accessible) of the Dresden reach June 4 – 28, 2018.
thumbnail
The data collection for the concrete-walled channel downstream from the Brandon Road Lock and Dam near Joliet, Illinois occurred in May 2014 Five pounds per square inch (lb/in2) was used as a threshold water pressure value for this study as this value incorporates fish behavior and structural integrity considerations. The Brandon Road study evaluated the performance of two different water gun configurations within the concrete-walled channel downstream from the lock with depths ranging from 12-15 feet. Data from a single 80 cubic inch (in³) water gun produced a roughly cylindrical 5 lb/in2 pressure field 20 feet in radius, oriented vertically, with the radius decreasing to less than 15 feet at the surface. A combination...
thumbnail
In August 2015, water velocities around a fully-loaded commercial barge tow were measured as the barge tow traveled upstream through the Chicago Sanitary and Ship Canal from a starting position in Lockport Pool, and passed through the Electric Dispersal Barrier System at river mile (RM) 296 near Romeoville, IL. Velocity measurements were made in and alongside the gap formed by the junction between the boxed stern of a rake hopper barge and the raked bow of a rake tanker barge (herein referred to as the rake-to-box junction gap) using two SonTek Argonaut SW 3kHz acoustic Doppler velocity meters (ADVM). One ADVM was mounted 0.091 meters below the water surface, facing downward in the center of the rake-to-box junction...
thumbnail
These data were collected using a 600 kHz TRDI Rio Grande acoustic Doppler current profiler (ADCP) in mode 12 with 50 centimeter bins from a moving boat. The data were georeferenced with a Trimble Ag132 differential Global Positioning System (GPS) receiver with submeter accuracy. The data have been depth-averaged over the entire measured portion of the water column and temporally averaged over 5-second intervals to reduce noise. These data were collected during water-quality surveys of the right bank of the Chicago Sanitary and Ship Canal (CSSC) and include low-velocity regions of the canal such as barge slips in addition to the main channel. Data were processed using the Velocity Mapping Toolbox (Parsons and others,...
thumbnail
Data include Rhodamine WT dye concentrations measured every 3 or 10 minutes by means of Turner Designs C-3 and C-6 fluorometers with internal dataloggers at three fixed locations on the Des Plaines River (DPR) (DP-1, DP-2, and DP-3); in three groundwater monitoring wells (ACL-1, WP10-85, and WP9-275); and at two fixed locations on the Chicago Sanitary and Ship Canal (CSSC) (SC-1 and SC-2) (see included Google Earth file AllDeployments_Locations.kmz). The detection limit for these fluorometers is reported to be 0.01 parts per billion (ppb). However, the fluorometer readings were affected by turbidity, and readings of less than about 1.0 part per billion (ppb) were considered to have been influenced by turbidity and...
thumbnail
Water temperature (degrees Celsius) and specific conductance (microsiemens per centimeter at 25 degrees Celsius; TC) were measured at U.S. Geological Survey streamgage 05536995, located at Chicago Sanitary and Ship Canal near the Electrical Dispersal Barrier System in Romeoville, Illinois. The TC data were measured every five minutes at four gage height levels above the gage datum (P1 = 21 feet, P2 = 17 feet, P3 = 13 feet, P4 = 9 feet). The gage datum is 551.76 feet above the North American Vertical Datum of 1988 (NAVD 88). Daily mean and five-minutes water temperature and specific conductance data were downloaded from the National Water Information System (NWIS) database and stored in Comma Separated Values (CSV)...
thumbnail
These data files include georeferenced water-quality data with associated time stamps (Central Standard Time) for basic water-quality parameters as measured by a towed multiparameter sonde (YSI 6920 sonde) from a manned boat in the Chicago Sanitary and Ship Canal. Data were collected on February 25-27, 2010, and again on March 2-3, 2010. The data collected in February 2010 had the sonde on a fixed mount about 1 foot below the surface. The data collected in March 2010 had the sonde on a towed cable about 7-9 feet below the surface. All data have been edited and reviewed. Omitted data have been flagged with a data value of -9999 in the data files.
thumbnail
In 2017, the U.S. Fish and Wildlife Service, U.S. Geological Survey, and U.S. Army Corps of Engineers undertook a large-scale interagency field study to determine the influence of commercial barge vessels on the efficacy of the Electric Dispersal Barrier System (EDBS) in the Chicago Sanitary and Ship Canal (CSSC) in preventing fish passage. This study included a series of trials in which a tow, consisting of a tug vessel and fully-loaded barges, transited the EDBS in both upstream-bound (n = 65) and downstream-bound (n = 66) directions. Wall-mounted velocity probes were located at (41.6423629, -88.060329). The configuration of the barges for each run, and the time at which the bow and stern of the tow pass the wall-mounted...
thumbnail
A boat equipped with a differential Global Positioning System (GPS) receiver (Hemisphere Crescent A100 Smart Antenna) and a Turner Designs C3 submersible fluorometer was used to survey the spatial distribution of the Rhodamine WT dye in the Chicago Sanitary and Ship Canal (CSSC) throughout the study area. The fluorometer was installed in a fixed, downlooking orientation approximately 1 foot below the water surface. Fluorometer readings were taken at a frequency of 1 per second. Data were acquired on a personal computer running the Turner Designs C-FINS software extension for ArcGIS 10. This data acquisition software allows the C3 data to be georeferenced and plotted in real time as color-coded concentrations on...
thumbnail
The data collection for the concrete-walled channel downstream from the Brandon Road Lock and Dam near Joliet, Illinois occurred in May 2014 Five pounds per square inch (lb/in2) was used as a threshold water pressure value for this study as this value incorporates fish behavior and structural integrity considerations. The Brandon Road study evaluated the performance of two different water gun configurations within the concrete-walled channel downstream from the lock with depths ranging from 12-15 feet. Data from a single 80 cubic inch (in³) water gun produced a roughly cylindrical 5 lb/in2 pressure field 20 feet in radius, oriented vertically, with the radius decreasing to less than 15 feet at the surface. A combination...
thumbnail
These data were collected using a 1200 kHz TRDI Rio Grande acoustic Doppler current profiler (ADCP) in mode 12 with 25 centimeter bins from a moving boat. The data were georeferenced with a Hemisphere Crescent A100 differential Global Positioning System (GPS) receiver with submeter accuracy. The data were processed in the Velocity Mapping Toolbox (Parsons and others, 2013) to obtain a mean velocity field for each cross section from four individual transects at each cross section. These data were collected by the U.S. Geological Survey (USGS) concurrently with environmental DNA (eDNA) sampling in this reach of the Chicago Sanitary and Ship Canal (CSSC) by the U.S. Fish and Wildlife Service (USFWS). NOTE: Any data...
thumbnail
The water temperature in degrees Celsius and specific conductance data in microsiemens per centimeter at 25 degrees Celsius (TC), measured at U.S. Geological Survey streamgage 05536995, located at Chicago Sanitary and Ship Canal near the Electrical Dispersal Barrier System in Romeoville, Illinois. The TC data are measured every five-minutes at four gage height levels above the gage datum (P1 = 21 feet, P2 = 17 feet, P3 = 13 feet, P4 = 9 feet). The gage datum is 551.76 feet above the North American Vertical Datum of 1988 (NAVD88). Daily mean and five-minutes water temperature and specific conductance data were downloaded from the National Water Information System and stored in a comma separated value files. Daily...
thumbnail
These data were collected using a 600 kHz TRDI Rio Grande acoustic Doppler current profiler (ADCP) in mode 12 with 50 centimeter bins from a moving boat. The data were georeferenced with a Hemisphere Crescent A100 differential Global Positioning System (GPS) receiver with submeter accuracy. The data have been depth-averaged over the entire measured portion of the water column and temporally averaged over 5-second intervals to reduce noise. These data were collected during dye tracing surveys of the right bank of the Chicago Sanitary and Ship Canal and include low-velocity regions of the canal such as barge slips in addition to the main channel. Data were processed using the Velocity Mapping Toolbox (Parsons and...
thumbnail
The data collection for the concrete-walled channel downstream from the Brandon Road Lock and Dam near Joliet, Illinois occurred in May 2014 Five pounds per square inch (lb/in2) was used as a threshold water pressure value for this study as this value incorporates fish behavior and structural integrity considerations. The Brandon Road study evaluated the performance of two different water gun configurations within the concrete-walled channel downstream from the lock with depths ranging from 12-15 feet. Data from a single 80 cubic inch (in³) water gun produced a roughly cylindrical 5 lb/in2 pressure field 20 feet in radius, oriented vertically, with the radius decreasing to less than 15 feet at the surface. A combination...
thumbnail
Remote sensing technologies, such as high-resolution sonar, can be used to collect more detailed information about the benthic and water column characteristics of macro habitats in the Illinois River. Multibeam echosounders (MBES) collect multibeam and sidescan simultaneously, providing high-resolution images of the riverbed. Sidescan images, in raster format, show the recorded intensity of acoustic signal returns from the river bed. The acoustic data were collected from the main channel (where accessible) of the Brandon reach May 24, 2018.
    map background search result map search result map Spatial distribution of depth-averaged velocity measured in the Chicago Sanitary and Ship Canal, Chicago, IL (March 2-3, 2010) Spatial distribution of depth-averaged velocity measured in the Chicago Sanitary and Ship Canal, Chicago, IL (December 7, 2010) Survey of velocity at cross sections in the Chicago Sanitary and Ship Canal near Sag Junction, Chicago, IL (December 7, 2010) Spatial distribution of depth-averaged velocity measured in the Chicago Sanitary and Ship Canal, Chicago, IL (November 16, 2011) Water-quality distribution in the Chicago Sanitary and Ship Canal, USGS towed multiparameter sonde, Daily tow data files (Feb. 25-27, 2010 and March 2-3, 2010) Rhodamine WT dye concentrations measured at fixed locations in the Des Plaines River and Chicago Sanitary and Ship Canal, Chicago, IL (November 14-29, 2011) Spatial distribution of Rhodamine WT dye concentration measured in the Chicago Sanitary and Ship Canal, Chicago, IL (November 15-18, 2011) Hydroacoustic measurements of velocities in and near the rake-to-box junction gap of a moving, fully-loaded commercial barge tow Brandon Road Lock and Dam Acceleration Data Brandon Road Lock and Dam Geophone Data Brandon Road Lock and Dam Hydrophone Data Acoustic Doppler current profiler velocity and discharge measurements collected in and near the lock chamber of Brandon Road Lock and Dam, Joliet, Illinois, USA in December 2014 Water velocity profiling at the U.S. Army Corps of Engineers Electric Dispersal Barrier in the Chicago Sanitary and Ship Canal during passage of fully-loaded commercial tows in August 2017: Run Information Illinois River, Dresden, Sidescan Image Mosaic June 2018 Illinois River, Brandon, Sidescan Image Mosaic, May 2018 Water temperature and specific conductance in the Chicago Sanitary and Ship Canal near the Electrical Dispersal Barrier System at Romeoville, Illinois, October 1, 2018, to September 30, 2019 Water Temperature and Specific Conductance in the Chicago Sanitary and Ship Canal Near the Electrical Dispersal Barrier System at Romeoville, Illinois, October 1, 2019, to September 30, 2020 Acoustic Doppler current profiler velocity and discharge measurements collected in and near the lock chamber of Brandon Road Lock and Dam, Joliet, Illinois, USA in December 2014 Hydroacoustic measurements of velocities in and near the rake-to-box junction gap of a moving, fully-loaded commercial barge tow Illinois River, Brandon, Sidescan Image Mosaic, May 2018 Brandon Road Lock and Dam Acceleration Data Brandon Road Lock and Dam Geophone Data Brandon Road Lock and Dam Hydrophone Data Spatial distribution of Rhodamine WT dye concentration measured in the Chicago Sanitary and Ship Canal, Chicago, IL (November 15-18, 2011) Illinois River, Dresden, Sidescan Image Mosaic June 2018 Spatial distribution of depth-averaged velocity measured in the Chicago Sanitary and Ship Canal, Chicago, IL (March 2-3, 2010) Rhodamine WT dye concentrations measured at fixed locations in the Des Plaines River and Chicago Sanitary and Ship Canal, Chicago, IL (November 14-29, 2011) Spatial distribution of depth-averaged velocity measured in the Chicago Sanitary and Ship Canal, Chicago, IL (November 16, 2011) Spatial distribution of depth-averaged velocity measured in the Chicago Sanitary and Ship Canal, Chicago, IL (December 7, 2010) Survey of velocity at cross sections in the Chicago Sanitary and Ship Canal near Sag Junction, Chicago, IL (December 7, 2010) Water-quality distribution in the Chicago Sanitary and Ship Canal, USGS towed multiparameter sonde, Daily tow data files (Feb. 25-27, 2010 and March 2-3, 2010)