Filters: Contacts: {oldPartyId:9395} (X) > Types: Map Service (X)
20 results (14ms)|
Filters
Date Range
Extensions Types
Contacts
Categories Tag Types Tag Schemes |
The Coupled Ocean-Atmosphere-Wave-Sediment Transport (COAWST Warner and others, 2019; Warner and others, 2010) model was used to simulate ocean circulation, waves, and sediment transport to study barrier island breaches that occurred during Hurricane Matthew (2016) near Matazas FL, and Hurricane Sandy (2012) at Fire Island, NY. Hurricane Sandy was a Saffir-Simpson Category 2 hurricane that transited the Western Atlantic Ocean relatively far offshore of the US East Coast for five days until turning west to make landfall in New Jersey on 29 October 2012, causing extreme coastal erosion and flooding with destruction to residences and infrastructure along the East coast, particularly in the New York Bight. Maximum...
This dataset contains images obtained from unmanned aerial systems (UAS) flown in the Cape Cod National Seashore. The objective of the field work was to evaluate the quality and cost of mapping from UAS images. Low-altitude (approximately 120 meters above ground level) digital images were obtained from cameras in a fixed-wing unmanned aerial vehicle (UAV) flown from the lawn adjacent to the Coast Guard Beach parking lot on 1 March, 2016. The UAV was a Skywalker X8 flying wing operated by Raptor Maps, Inc., contractors to the U.S. Geological Survey. U.S. Geological Survey technicians deployed and mapped 28 targets that appear in some of the images for use as ground control points. All activities were conducted according...
Low-altitude (80-100 meters above ground level) digital images were obtained from a camera mounted on a 3DR Solo quadcopter, a small unmanned aerial system (UAS), along the Lake Ontario shoreline in New York during July 2017. These data were collected to document and monitor effects of high lake levels, including shoreline erosion, inundation, and property damage in the vicinity of Sodus Bay, New York. This data release includes images tagged with locations determined from the UAS GPS; tables with updated estimates of camera positions and attitudes based on the photogrammetric reconstruction; tables listing locations of the base stations, ground control points, and transect points; geolocated, RGB-colored point...
A process-based numerical model of the mouth of the Columbia River (MCR) and estuary, Oregon and Washington, was applied to simulate hydrodynamic conditions for the time period of the Office of Naval Research-funded River and Inlets Dynamics (RIVET II) experiment between May 9 and June 15, 2013. The model application was constructed using Delft3D, an open-source software package used to solve the unsteady shallow water equations to simulate water motion due to tides, waves, wind, and buoyancy effects (Lesser and others, 2004). This portion of the USGS data release describes the model application for this experiment and presents input files necessary to run the Delft3D model. Model Description The model application...
This dataset contains the locations of independent survey points acquired on the same day that images were obtained from unmanned aerial systems (UAS) flown in the Cape Cod National Seashore. The overall objective of the field work was to evaluate the quality and cost of mapping from UAS images. Low-altitude (approximately 120 meters above ground level) digital images were obtained from cameras in a fixed-wing unmanned aerial vehicle (UAV) flown from the lawn adjacent to the Coast Guard Beach parking lot on 1 March, 2016. U.S. Geological Survey technicians deployed and mapped 28 targets that appear in some of the images for use as ground control points. All activities were conducted according to Federal Aviation...
Low-altitude (80-100 meters above ground level) digital images were obtained from a camera mounted on a 3DR Solo quadcopter, a small unmanned aerial system (UAS), along the Lake Ontario shoreline in New York during July 2017. These data were collected to document and monitor effects of high lake levels, including shoreline erosion, inundation, and property damage in the vicinity of Sodus Bay, New York. This data release includes images tagged with locations determined from the UAS GPS; tables with updated estimates of camera positions and attitudes based on the photogrammetric reconstruction; tables listing locations of the base stations, ground control points, and transect points; geolocated, RGB-colored point...
This portion of the USGS data release presents sediment grain-size data from samples collected from the mouth of the Columbia River, Oregon and Washington, in 2013 (USGS Field Activity Number S-03-13-PS). Surface sediment was sampled using a small ponar, or 'grab', sampler on May 9, 2013 from the F/V Cape Windy at three locations corresponding to sites where instrumented tripods were deployed. A handheld GNSS receiver was used to determine the locations of sediment samples. The grain-size distributions of samples were determined in the USGS Pacific Coastal and Marine Science Center sediment lab. Approximately 20 g of sediment was sub-sampled and 10 mL of 35 percent hydrogen peroxide was added to remove organic...
Low-altitude (80-100 meters above ground level) digital images were obtained from a camera mounted on a 3DR Solo quadcopter, a small unmanned aerial system (UAS), along the Lake Ontario shoreline in New York during July 2017. These data were collected to document and monitor effects of high lake levels, including shoreline erosion, inundation, and property damage in the vicinity of Sodus Bay, New York. This data release includes images tagged with locations determined from the UAS GPS; tables with updated estimates of camera positions and attitudes based on the photogrammetric reconstruction; tables listing locations of the base stations, ground control points, and transect points; geolocated, RGB-colored point...
During May and June of 2013, the U.S. Geological Survey in collaboration with Naval Post-Graduate School, the University of Miami, and Deltares USA, participated in the Office of Naval Research-funded River and Inlets Dynamics (RIVET II) experiment to investigate the hydrodynamics of the mouth of the Columbia River (MCR). The field experiment consisted of the collection of continuous oceanographic data at three moorings, shipboard surveys and Lagrangian drifter deployments to characterize spatial variability in hydrodynamics and water properties, and hydrographic surveys to characterize seafloor morphology in the MCR. These datasets were used to calibrate and validate a hydrodynamic model of the MCR, estuary, and...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Geophysics,
PCMSC
This dataset documents the locations of ground control points associated with images obtained from unmanned aerial systems (UAS) flown in the Cape Cod National Seashore. Most of the ground control points were temporary targets placed by the U.S. Geological Survey field crew, but four were man-made features already in place, and two were points selected a posteriori from preliminary orthophotomosaics. Photographs of the four in-place features are included in this dataset, as are images showing the location of the two a posteriori points at two zoom levels. The locations of these ground control points can be used to constrain photogrammetric reconstructions based on the aerial imagery. The overall objective of the...
This portion of the data release presents water column acoustic backscatter data collected in the mouth of the Columbia River, Oregon and Washington, in 2013. Shipboard surveys to measure the acoustic properties of the water column were performed between May 28, 2013 and June 2, 2013 (USGS Field Activity S-03-13-WO) using a Biosonics single beam echosounder. The transducer was pole-mounted to the side of the R/V Park Snavely at approximately 1 m below the water surface and measurements were recorded as the vessel navigated along several cross-channel transects within the MCR. The 430 kHz transducer was set with a pulse length of 0.2 ms and a ping rate of 10 Hz and recorded data to a depth of 35 m below the transducer...
These text files contain tables of the file names, times, and locations of images obtained from an unmanned aerial systems (UAS) flown in the Cape Cod National Seashore. The objective of the fieldwork was to evaluate the quality and cost of mapping from UAS images. Low-altitude (approximately 120 meters above ground level) digital images were obtained from cameras in a fixed-wing unmanned aerial vehicle (UAV) flown from the lawn adjacent to the Coast Guard Beach parking lot on 1 March, 2016. The UAV was a Skywalker X8 flying wing operated by Raptor Maps, Inc., contractors to the U.S. Geological Survey. U.S. Geological Survey technicians deployed and mapped 28 targets that appear in some of the images for use as...
This data release supersedes version 1.0, published in September 2022 at https://doi.org/10.5066/P9XEFRYR. Versioning details are documented in the accompanying Dunex_revision_history.txt file. These data provide grain-size measurements from sediment samples collected as part of the USGS DUring Nearshore Event eXperiment (DUNEX) site on Pea Island National Wildlife Refuge, NC. DUNEX is a multi-agency, academic, and non-governmental organization collaborative community experiment designed to study nearshore coastal processes during storm events. USGS participation in DUNEX will contribute new measurements and models that will increase our understanding of storm impacts to coastal environments, including hazards...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Atlantic Ocean,
CMHRP,
Coastal and Marine Hazards and Resources,
DUNEX,
Dare,
Low-altitude (80-100 meters above ground level) digital images were obtained from a camera mounted on a 3DR Solo quadcopter, a small unmanned aerial system (UAS), along the Lake Ontario shoreline in New York during July 2017. These data were collected to document and monitor effects of high lake levels, including shoreline erosion, inundation, and property damage in the vicinity of Sodus Bay, New York. This data release includes images tagged with locations determined from the UAS GPS; tables with updated estimates of camera positions and attitudes based on the photogrammetric reconstruction; tables listing locations of the base stations, ground control points, and transect points; geolocated, RGB-colored point...
The Coupled Ocean-Atmosphere-Wave-Sediment Transport (COAWST Warner and others, 2019; Warner and others, 2010) model was used to simulate ocean circulation, waves, and sediment transport to study barrier island breaches that occurred during Hurricane Matthew (2016) near Matazas FL, and Hurricane Sandy (2012) at Fire Island, NY. Hurricane Sandy was a Saffir-Simpson Category 2 hurricane that transited the Western Atlantic Ocean relatively far offshore of the US East Coast for five days until turning west to make landfall in New Jersey on 29 October 2012, causing extreme coastal erosion and flooding with destruction to residences and infrastructure along the East coast, particularly in the New York Bight. Maximum...
The Coupled Ocean-Atmosphere-Wave-Sediment Transport (COAWST Warner and others, 2019; Warner and others, 2010) model was used to simulate ocean circulation, waves, and sediment transport to study barrier island breaches that occurred during Hurricane Matthew (2016) near Matazas FL, and Hurricane Sandy (2012) at Fire Island, NY. Hurricane Sandy was a Saffir-Simpson Category 2 hurricane that transited the Western Atlantic Ocean relatively far offshore of the US East Coast for five days until turning west to make landfall in New Jersey on 29 October 2012, causing extreme coastal erosion and flooding with destruction to residences and infrastructure along the East coast, particularly in the New York Bight. Maximum...
The Coupled Ocean-Atmosphere-Wave-Sediment Transport (COAWST Warner and others, 2019; Warner and others, 2010) model was used to simulate ocean circulation, waves, and sediment transport to study barrier island breaches that occurred during Hurricane Matthew (2016) near Matazas FL, and Hurricane Sandy (2012) at Fire Island, NY. Hurricane Sandy was a Saffir-Simpson Category 2 hurricane that transited the Western Atlantic Ocean relatively far offshore of the US East Coast for five days until turning west to make landfall in New Jersey on 29 October 2012, causing extreme coastal erosion and flooding with destruction to residences and infrastructure along the East coast, particularly in the New York Bight. Maximum...
Low-altitude (80-100 meters above ground level) digital images were obtained from a camera mounted on a 3DR Solo quadcopter, a small unmanned aerial system (UAS), along the Lake Ontario shoreline in New York during July 2017. These data were collected to document and monitor effects of high lake levels, including shoreline erosion, inundation, and property damage in the vicinity of Sodus Bay, New York. This data release includes images tagged with locations determined from the UAS GPS; tables with updated estimates of camera positions and attitudes based on the photogrammetric reconstruction; tables listing locations of the base stations, ground control points, and transect points; geolocated, RGB-colored point...
This USGS data release presents oceanographic time-series measurements of currents, waves, water-column properties, and sediment transport recorded at three locations by instrumented tripods deployed in the mouth of the Columbia River (MCR) between May and June, 2013 (USGS Field Activity S-03-13-WO). Each tripod was equipped with similar instrumentation (figure 1) including an upward looking 1200 kHz Teledyne RD Instruments acoustic Doppler current profiler (ADCP), a 5 MHz Sontek acoustic Doppler velocimeter (ADV) and Hydra data recorder, an RBR conductivity, temperature, and depth (CTD) sensor, and Imagenex 881 (fan beam) and 881A (pencil beam) sonars. The tripods were deployed on May 9, 2013 from the F/V Cape...
This portion of the USGS data release presents data from spatial surveys of water column currents and acoustic backscatter collected in the mouth of the Columbia River, Oregon and Washington, in 2013 (USGS Field Activity S-03-13-WO). Measurements of current velocity, discharge, and acoustic backscatter amplitude in the water column were collected using a downward looking 600 kHz Teledyne RDI ADCP pole-mounted to the R/V Park Snavely. Positioning and orientation of the ADCP were measured using an Applanix POS MV 320 and recorded at 1 Hz intervals. Data acquisition and merging of the ADCP and positioning data were achieved with Teledyne RDI VMDAS software. While underway, profiles of current velocity and acoustic...
|
|
