Filters: System Type: Data Release (X) > Categories: NOT Data Release - In Progress (X) > Tags: {"scheme":"none"} (X) > Types: OGC WFS Layer (X)
259 results (50ms)|
Filters
Date Range
Extensions Types
Contacts
Categories Tag Types Tags (with Scheme=none) |
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown herein as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Assessment Unit,
Continuous Assessment Unit,
Earth Science,
Economic geology,
Energy Resources,
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown herein as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Assessment Unit,
Continuous Assessment Unit,
Earth Science,
Economic geology,
Energy Resources,
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
The USGS Central Region Energy Team assesses oil and gas resources of the United States. The onshore and State water areas of the United States comprise 71 provinces. Within these provinces, Total Petroleum Systems are defined and Assessment Units are defined and assessed. Each of these provinces is defined geologically, and most province boundaries are defined by major geologic changes. The Denver Basin Province is located in eastern Colorado, western Nebraska, southern South Dakota, and eastern Wyoming encompassing all or parts of Pueblo, El Paso, Crowley, Lincoln, Kit Carson, Elbert, Teller, Douglas, Jefferson, Denver, Arapahoe, Adams, Washington, Yuma, Morgan, Weld, Broomfield, Boulder, Larimer, Logan, Sedwick,...
The USGS Central Region Energy Team assesses oil and gas resources of the United States. The onshore and State water areas of the United States comprise 71 provinces. Within these provinces, Total Petroleum Systems are defined and Assessment Units are defined and assessed. Each of these provinces is defined geologically, and most province boundaries are defined by major geologic changes. The Montana Thrust Belt Province is located in western Montana, encompassing all or parts of Beaverhead, Broadwater, Cascade, Deer Lodge, Flathead, Gallatin, Glacier, Granite, Jefferson, Lake, Lewis and Clark, Lincoln, Madison, Meagher, Mineral, Missoula, Park, Pondera, Powell, Ravalli, Sanders, Silver Bow, and Teton counties in...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 27 = Montana Thrust Belt,
502701 = Thrust Belt Paleozoic/Mesozoic Composite,
50270101 = Thrust Belt Conventional Gas and Oil,
50270102 = Sawtooth Range Structure Conventional Oil and Gas,
50270103 = Frontal Structures Conventional Oil and Gas,
The USGS Central Region Energy Team assesses oil and gas resources of the United States. The onshore and State water areas of the United States comprise 71 provinces. Within these provinces, Total Petroleum Systems are defined and Assessment Units are defined and assessed. Each of these provinces is defined geologically, and most province boundaries are defined by major geologic changes. The Southwestern Wyoming Province is located in northeastern Utah, northwestern Colorado and southwestern Wyoming, encompassing all or parts of Eagle, Garfield, Moffat, Rio Blanco, and Routt Counties in Colorado and all or parts of Carbon, Fremont, Lincoln, Sweetwater, Sublette, Teton, and Uintah Counties in Wyoming and all or parts...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 503701 = Phosphoria Total Petroleum System,
50370101 = Sub-Cretaceous Conventional Oil and Gas,
503702 = Mowry Composite Total Petroleum System,
50370201 = Mowry Conventional Oil and Gas,
50370261 = Mowry Continuous Gas,
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province, and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 500102 = Northern Alaska Gas Hydrate,
50010201 = Sagavanirktok Formation Gas Hydrate,
50010202 = Tuluvak-Schrader Bluff-Prince Creek Formation Gas Hydrate,
50010203 = Nanushuk Formation Gas Hydrate,
AK,
Cell maps for each oil and gas assessment unit were created by the USGS to illustrate the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells were then coded to indicate whether the wells included within the cell are predominantly oil-producing, gas-producing, are both oil- and gas-producing, or are dry or the type of production is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 503401 = Phosphoria,
50340101 = Paleozoic-Mesozoic Conventional Oil and Gas,
503402 = Cretaceous-Tertiary Composite,
50340201 = Cretaceous-Tertiary Conventional Oil and Gas,
50340261 = Muddy-Frontier Sandstone and Mowry Fractured Shale Continuous Gas,
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 506501 = Chattanooga Shale/Floyd Shale-Paleozoic,
50650101 = Pre-Mississippian Carbonates Gas,
50650102 = Carboniferous Sandstones Oil and Gas,
506502 = Pottsville Coal,
50650281 = Black Warrior Basin Coalbed Gas,
This map shows the structural configuration on the top of the Cotton Valley Group in feet below sea level. The map was produced by calculating the difference between a datum at the land surface (either the kelly bushing elevation or the ground surface elevation) and the reported depth of the Cotton Valley Group. This resulted in 10,687 wells for which locations were available. After deleting the wells with obvious data problems, a total of 10,504 wells were used to generate the map. The data are provided as both lines and polygons, and the proprietary wells that penetrate the top of the Cotton Valley Group are graphically displayed as quarter-mile cells. The well information was initially retrieved from the IHS...
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 500501 = Cretaceous-Tertiary Composite,
50050101 = Eastern Oregon and Washington Conventional Gas,
50050102 = Republic Graben Gas,
50050161 = Columbia Basin Continuous Gas,
Brownfield, M. and Tennyson, M.,
This U.S. Geological Survey (USGS) data release contains data from stream water, groundwater, and soil samples collected in 2019 and 2020 in the North Quartz Creek watershed in central Colorado. Fourteen streambank wells were installed in pairs at seven locations in August 2020 to capture the emerging groundwater from the left bank and right banks (relative to downstream-facing direction) and a synoptic sampling campaign was conducted to quantify metal contributions to the stream. A continuous, instream injection of sodium bromide (NaBr) was initiated at the head of the 5 km study reach several days prior to the synoptic sampling campaign and maintained throughout the duration of the study. Bromide concentrations...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Shapefile;
Tags: "Environmental Health"],
"Mineral Resources",
"Water Quality",
GGGSC,
Geology, Geophysics, and Geochemistry Science Center,
Detailed geologic mapping and sample collection was conducted in rare bedrock exposures of the Denali fault zone during the summer months of 2013, 2014, and 2015 by the U.S. Geological Survey. Data include measurements of structural geologic orientations and documentation of fault zone and host rock characteristics. Representative samples were selected for measurements of fault vein attributes and electron backscatter diffraction studies to characterize deformation mechanisms. All station locations, pertinent sample information, and associated data are included in this data release.
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Bedrock,
Canada,
Denali fault,
Fault rock,
Faulting (geologic),
Airborne electromagnetic (AEM) and magnetic survey data, a total of 3065 line-kilometers, were collected during October 2001 in two survey blocks and four repeated lines from an earlier survey. The largest area, Block 1 totaling 2692.2 line-kilometers was flown over Big Cypress Preserve, smaller Block 2 along 277.1 line-kilometers was flown near the town of Homestead, and four lines totaling 95.2 line-kilometers were flown over Everglades National Park. The lines over Everglades National Park repeated the path of four lines from an earlier AEM survey collected in December 1994 (released under USGS Open-File Report 02-101 downloadable at https://pubs.er.usgs.gov/publication/ofr02101). Electromagnetic data were acquired...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Big Cypress National Preserve,
City of Homestead,
Dade County,
Everglades National Park,
Florida Bay,
In 1968, the Missouri Geological Survey (MGS) established the Operation Basement program to address three objectives: a) to obtain drill hole and underground mining data relative to the structure and composition of the buried Precambrian basement; b) to expand mapping in the Precambrian outcrop area and conduct research related to Precambrian geology and mineral resources; and c) to publish the results of the first two objectives in the Contribution to Precambrian Geology series (Kisvarsanyi, 1976). The database presented here represents the first of those objectives. It was originally compiled in close cooperation with exploration and mining companies operating in Missouri, who provided drillhole data, core and...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Adair County,
Andrew County,
Atchison County,
Audrain County,
Barry County,
The geochemical data included here were generated as part of a Technical Assistance Agreement between the U.S. Geological Survey (USGS) and Rio Tinto Exploration based in Salt Lake City, Utah. Beginning in November of 2015, we began a project to reanalyze up to 60,000 archived sample splits originally collected as part of the National Uranium Resource Evaluation (NURE) Hydrogeochemical and Stream Sediment Reconnaissance (HSSR) project from selected areas in Arizona, California, Idaho, Montana, Nevada, New Mexico, and Utah. A small amount (approximately 0.25 g) of sieved <75 micron sample material was retrieved from the USGS National Geochemical Sample Archive for geochemical analysis. These samples were analyzed...
Categories: Data,
Data Release - Revised;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Arizona,
California,
Hydrogeochemistry and Stream Sediment Reconnaissance,
Idaho,
Montana,
A suite of geophysical methods was used along the Cedar River in Cedar Rapids, Iowa to support the hydrogeologic characterization of the alluvial aquifer associated with the river and to assess the area for suitability for larger-scale airborne geophysics. The aquifer is comprised of sand and gravel, interbedded with finer sediments, and underlain by carbonate-dominated bedrock. The aquifer is the principal source of municipal drinking water for the City of Cedar Rapids. The raw data provided here includes waterborne continuous resistivity profiling (CRP) and continuous seismic profiling (CSP) data (collected at the same time), electrical resistivity tomography (ERT) profiles, and horizontal-to-vertical spectral...
Nitrogen, phosphorus, and suspended-sediment loads, and changes in loads, in major rivers across the Chesapeake Bay watershed have been calculated using monitoring data from the Chesapeake Bay River Input Monitoring (RIM) stations for the period 1985 through 2019. Nutrient and suspended-sediment loads and changes in loads were determined by applying a weighted regression approach called WRTDS (Weighted Regression on Time, Discharge, and Season). The load results represent the total mass of nitrogen, phosphorus, and suspended sediment that was exported from each of the RIM watersheds. To determine the trend in loads, the annual load results are flow normalized to integrate out the year-to-year variability in river...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Chesapeake Bay Watershed,
Delaware,
Maryland,
New York,
Pennsylvania,
This data release provides digital flight line data for a high-resolution airborne magnetic and radiometric survey over Charleston, South Carolina and the surrounding region. These data were collected to better understand earthquake hazards in the Charleston seismic zone by imaging structural features in the crystalline basement and to image heavy mineral sands containing titanium, zirconium, and rare earth elements using radiometric data (gamma spectrometry), which is sensitive to thorium in monazite. This survey represents a collaborative effort by the U.S. Geological Survey (USGS) Earthquake Hazards Program, Mineral Resources Program, National Cooperative Mapping Program, and Earth Mapping Resource Initiative...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Berkeley County,
Charleston,
Charleston County,
Clarendon County,
Colleton County,
From October 2016 to July 2018, the U.S. Geological Survey, in cooperation with the U.S. Army Corps of Engineers and Maine Department of Transportation, collected surface, marine and borehole geophysical surveys to characterize the subsurface materials on land and under the water at a former mine facility in Brooksville, Maine. Three water-based geophysical methods were used to evaluate the geometry and composition of subsurface materials. Continuous seismic profiling (CSP) methods provide the depth to water bottom, and, when sufficient signal penetration can be achieved, delineate the depth to bedrock and subbottom materials. Continuous resistivity profiling (CRP) and frequency domain electromagnetics (FDEM) methods...
|
|
