Skip to main content
Advanced Search

Filters: Tags: {"scheme":"GNIS"} (X) > Types: Map Service (X) > partyWithName: U.S. Geological Survey (X)

56 results (17ms)   

View Results as: JSON ATOM CSV
thumbnail
This data release presents peak-flow frequency analyses by the U.S. Geological Survey based on methods described by Eash and others (2013) for streamgages 06600100, Floyd River at Alton, Iowa; 06600300, West Branch Floyd River near Struble, Iowa; 06600500, Floyd River near James, Iowa; 06605000, Ocheyedan River near Spencer, Iowa; 06605850, Little Sioux River at Linn Grove, Iowa; 06607200, Maple River at Mapleton, Iowa; and 06607500, Little Sioux River near Turin, Iowa. These methods are used to provide estimates of peak-flow quantiles for 50-, 20-, 10-, 4-, 2-, 1-, 0.5-, and 0.2-percent annual exceedance probabilities (AEPs). Annual peak-flow data used in the peak-flow frequency analyses for these streamgages were...
thumbnail
This data set consists of digital data describing wetlands and uplands habitats for the Mississippi Coastal Improvements Program (MsCIP) area, consisting of Cat, Ship, Horn and Petit Bois Islands for the year 2020. Wetlands were classified using the Cowardin, et al., wetlands classification scheme to the level of freshwater and tidal, salinity modifiers. Uplands were classified using a customized classification scheme which can be cross-referenced to Anderson, et. al. For this dataset, upland dunes were delineated as areas at or above 1.524 meters (5 feet) as determined in the Lidar data that was referenced without modification for this classification. With this elevation criteria some delineated upland dune features...
thumbnail
This child item contains the spatial data associated with the bathymetric survey of the Levittown lake, conducted on January 11, 2011. The child item consist of two datasets: 1) contours of the lake bottom and 2) data points colleced along each established navigation line, to calculate the water volume of the lake at mean sea level. A bathymetric/land survey system (BLASS) interfaced to a depth sounder was used to conduct the survey. The system consists of a Global Positioning System (GPS) and a digital depth sounder. Geographic location and water depth data were simultaneously collected and stored in a portable computer. The data were then transferred into the USGS geographic information system (GIS) for processing...
In this study, we develop urban ecosystem accounts in the U.S., using the System of Environmental-Economic Accounting Experimental Ecosystem Accounting (SEEA EEA) framework. Most ecosystem accounts focus on regional and national scales, which are appropriate for many ecosystem services. However, ecosystems provide substantial services in cities, improving quality of life and contributing to resiliency for substantial parts of the population. Our models estimate energy savings for indoor cooling resulting from heat mitigated by trees and rainfall intercepted by trees. Both models cover major cities in the contiguous U.S. and report the results through physical supply and use tables for multiple accounting periods...
thumbnail
Here we present an inventory of remotely and field-observed landslides triggered by 2019-2020 Puerto Rico earthquake sequence. The inventory was mapped using pre- and post-event satellite imagery (PR_landslide_inventory_imagery.csv), an extensive collection of field observations (https://doi.org/10.5066/P96QNFMB) and using pre-earthquake lidar as guidance for mapping polygons with more precise locations and geometries (2015 - 2017 USGS Lidar DEM: Puerto Rico dataset). The inventory consists of a shapefile of 309 polygons (PR_landslide_inventory_pts.shp) outlining the source area and deposits together. It also includes a point inventory (PR_landslide_inventory_pts.shp) marking 170 individual displaced boulders that...
thumbnail
The USGS Wyoming-Montana Water Science Center (WY–MT WSC) completed a report (Sando and McCarthy, 2018) documenting methods for peak-flow frequency analysis following implementation of the Bulletin 17C guidelines. The methods are used to provide estimates of peak-flow quantiles for 50-, 42.9-, 20-, 10-, 4-, 2-, 1-, 0.5-, and 0.2-percent annual exceedance probabilities (AEPs) for selected streamgages operated by the WY–MT WSC. This data release presents peak-flow frequency analyses for 11 selected streamgages in Jefferson County, Montana, that were based on methods described by Sando and McCarthy (2018).
thumbnail
We monitored displacement of the Slumgullion landslide located in Hinsdale County, Colorado. We measured displacement at the ground surface between 12 August 2011 and 10 October 2018, and in the subsurface between 4 September 2016 and 7 December 2016. Both types of data were acquired at irregular time intervals. Displacement at the ground surface was measured at locations within the upper, middle, and lower parts of the landslide using electronic cable extension transducers (extensometers) with stated ±0.7 mm accuracy (Extensometer_data.csv). Subsurface displacement was measured near the middle of the landslide using a 16-sensor array of 30.48-cm-long tilt sensors (inclinometer) installed within a PVC-cased borehole....
thumbnail
This shapefile compares the approximate location of mangroves within the boundary of Ten Thousand Islands NWR in 2005 to their location in 2014.
thumbnail
The Barrier Island Comprehensive Monitoring (BICM) program was developed by Louisiana’s Coastal Protection and Restoration Authority (CPRA) and is implemented as a component of the System Wide Assessment and Monitoring Program (SWAMP). The program uses both historical data and contemporary data collections to assess and monitor changes in the aerial and subaqueous extent of islands, habitat types, sediment texture and geotechnical properties, environmental processes, and vegetation composition. Examples of BICM datasets include still and video aerial photography for documenting shoreline changes, shoreline positions, habitat mapping, land change analyses, light detection and ranging (lidar) surveys for topographic...
thumbnail
The Barrier Island Comprehensive Monitoring (BICM) program was developed by Louisiana’s Coastal Protection and Restoration Authority (CPRA) and is implemented as a component of the System Wide Assessment and Monitoring (SWAMP) program. The program uses both historical data and contemporary data collections to assess and monitor changes in the aerial and subaqueous extent of islands, habitat types, sediment texture and geotechnical properties, environmental processes, and vegetation composition. Examples of BICM datasets include still and video aerial photography for documenting shoreline changes, shoreline positions, habitat mapping, land change analyses, light detection and ranging (lidar) surveys for topographic...
thumbnail
This dataset includes the following measurements made over a xeric tall grass prairie in the southwest portion of Rocky Flats National Wildlife Refuge in 2011 and 2012: 1) half hourly eddy covariance measurements of latent heat flux (evapotranspiration) and fluxes of carbon dioxide and sensible heat, and friction velocity (U star) 2) half hour averages of solar and net radiation; photosynthetically active radiation; air temperature and humidity; soil temperature, moisture, and heat flux; wind speed and direction; and half hour sums of precipitation. 3) approximately weekly measurements of vegetation including leaf area index, height of vegetation, dry and wet weights
thumbnail
The USGS Wyoming-Montana Water Science Center (WY–MT WSC) completed a report (Sando and McCarthy, 2018) documenting methods for peak-flow frequency analysis following implementation of the Bulletin 17C guidelines. The methods are used to provide estimates of peak-flow quantiles for 50-, 42.9-, 20-, 10-, 4-, 2-, 1-, 0.5-, and 0.2-percent annual exceedance probabilities (AEPs) for selected streamgages operated by the WY–MT WSC. This data release presents peak-flow frequency analyses for Elk Creek at Augusta, Montana, that were based on methods described by Sando and McCarthy (2018). Sando, S.K., and McCarthy, P.M., 2018, Methods for peak-flow frequency analysis and reporting for streamgages in or near Montana based...
thumbnail
The U.S. Geological Survey Toxic Substances Hydrology Program at Cape Cod has been investigating the fate and transport of a treated-wastewater, groundwater contaminant plume. A portion of the contaminated groundwater discharges into Ashumet Pond, a kettle hole, freshwater lake. A study was conducted from June 2013 to June 2015 to document transport, transformation, and discharge of dissolved inorganic nitrogen species (DIN; nitrate, nitrite, and nitrous oxide) from the contaminant plume to the lake, across the groundwater-surface water interface. As part of that study, in October 2014, two natural gradient tracer tests were conducted within the lake bed sediments using nitrite as a reactive tracer and bromide as...
thumbnail
Supporting datasets for the associated journal publication "Towards reproducible environmental modeling for decision support: a worked example". Includes source codes for the version of PEST++ and MODFLOW-2005 used, the pyEMU and FloPy python modules and the driver script "eaa.py". Also included are the existing MODFLOW-2005 models supplied the Edwards Aquifer Authority
This data release presents a peak-flow frequency analysis (Eash and others, 2013) for U.S. Geological Survey streamgage 06810000 Nishnabotna River above Hamburg, Iowa. These methods are used to provide estimates of peak-flow quantiles for 50-, 20-, 10-, 4-, 2-, 1-, 0.5-, and 0.2-percent annual exceedance probabilities (AEPs). Annual peak-flow data used in the peak-flow frequency analysis for this streamgage was retrieved from the U.S. Geological Survey National Water Information System database (U.S. Geological Survey, 2021) and used with USGS flood-frequency analysis software PeakFQ (Veilleux and others, 2014). This data release contains annual peak-flow data (nishnabotna_2020_WATSTORE.txt), PeakFQ specifications...
thumbnail
This data release contains machine-readable files accompanying the study “Quaternary Reelfoot fault deformation in the Obion River valley, Tennessee, USA" published by Delano et al. (2021) in Tectonics. The data release includes grain size analyses from three auger sites (TableS1_WilsonLoop_grainsize.txt, TableS2_Lanesferry_grainsize.txt, TableS3_BiggsFarm_grainsize.txt) and unit descriptions from three auger sites and a modern analog (TableS4_modern_floodplain_unit_desc.csv, TableS5_Wilson_Loop_unit_desc.csv, TableS6_Lanesferry_Road_unit_desc.csv, TableS7_Biggs_Farm_unit_desc.csv). A readme file (readme.txt) provides details for each file. Delano, J.E., Briggs, R.W., Thompson Jobe, J., Gold, R.D., and Engelhart,...
Hurricane Maria caused widespread landsliding throughout Puerto Rico during September 2017. Previous detailed landslide inventories following the hurricane include Bessette-Kirton et al. (2017, 2019). Here we continue that work with an in-depth look at a portion of northwest Naranjito, which is a municipality in the northeastern part of the main island. To study a characteristic sample of landslides in Naranjito, we mapped all visible individual landslides in an approximately triangular area 2.3 km wide by 1.9 km long. The boundary of our mapping was defined by previous studies (Bessette-Kirton et al., 2019). We used aerial imagery collected between 9-15 October 2017 (Quantum Spatial, Inc., 2017) to map landslide...
thumbnail
From October 2016 to July 2018, the U.S. Geological Survey, in cooperation with the U.S. Army Corps of Engineers and Maine Department of Transportation, collected surface, marine and borehole geophysical surveys to characterize the subsurface materials on land and under the water at a former mine facility in Brooksville, Maine. Three water-based geophysical methods were used to evaluate the geometry and composition of subsurface materials. Continuous seismic profiling (CSP) methods provide the depth to water bottom, and, when sufficient signal penetration can be achieved, delineate the depth to bedrock and subbottom materials. Continuous resistivity profiling (CRP) and frequency domain electromagnetics (FDEM) methods...
thumbnail
Nitrogen, phosphorus, and suspended-sediment loads, and changes in loads, in rivers across the Chesapeake Bay watershed have been calculated using monitoring data from the Chesapeake Bay Nontidal Network (NTN) stations for the period 1985 through 2014. Nutrient and suspended-sediment loads and changes in loads were determined by applying a weighted regression approach called WRTDS (Weighted Regression on Time, Discharge, and Season). The load results represent the total mass of nitrogen, phosphorus, and suspended sediment that was exported from each of the NTN watersheds. To determine the trend in loads, the annual load results are flow normalized to integrate out the year-to-year variability in river discharge....
thumbnail
This data release presents a peak-flow frequency analysis for U.S. Geological Survey streamgage 05481510 Bluff Creek at Pilot Mound, Iowa. The annual peak-flow record at this streamgage consists of both a discrete crest-stage period and a continuous partial-record period. The streamgage, which is in the Des Moines River Basin, is located on 130th Street in Pilot Mound, Iowa. Drainage area at the streamgage is 23.5 square miles. Annual peak-flow data are available for the period 1966-2021. The peak of record, 1,290 cubic feet per second, occurred on June 16, 1990. The annual peak-flow data used in the frequency analysis were downloaded from the U.S. Geological Survey National Water Information System database (U.S....