Filters: Tags: geomorphology (X) > Date Range: {"choice":"year"} (X) > partyWithName: U.S. Geological Survey - ScienceBase (X)
331 results (106ms)|
Filters
Date Types (for Date Range)
Types
Contacts
Categories
Tag Types
|
The Colorado Plateau structural province features long monoclinal flexures between uplifts and basins that are the major lines of deformation within and marginal to the Plateau. These folds are named, well-known, and have been described as part of several previous tectonic syntheses of the Colorado Plateau (Kelley, 1955; Davis, 1978; 1999). However, no digital data have ever been created that locate these folds in digital map space. This digital dataset compiles mapped locations of monoclinal folds from several geologic maps from the Colorado Plateau, most released only in “paper”, non-vector format. Fold names and their general map trace were guided by regional-scale maps that synthesize the tectonic elements of...
These data were compiled to provide a resource for other researchers interested in water-surface elevations and flow velocity across a wide range of discharge in the study reach for the project. Objective(s) of our study were to construct a two-dimensional hydrodynamic model for the 15.8 mile tailwater reach of the Colorado River in Glen Canyon between Glen Canyon Dam and Lees Ferry, Arizona. These data represent the results of the two-dimensional modeling effort with each data table (50) including the results of each run of the model. Additionally, other data represent a comparison of modeled water surface elevations to measured water surface elevations for historic Bureau of Reclamation cross sections in the study...
An unmanned aerial system (UAS) was used to acquire high-resolution imagery of the intertidal zone at West Whidbey Island, Washington on June 4, 2019. This imagery was processed using structure-from-motion (SfM) photogrammetric techniques to derive a high-resolution digital surface model (DSM), orthomosaic imagery, and topographic point clouds. In order to maximize the extent of the subaerially exposed area, the survey was timed to coincide with a spring low tide occurring at approximately 18:02 Universal Coordinated Time (UTC) (11:02 Pacific Daylight Time (PDT)), with a predicted water level of -0.74 meters below mean lower-low water (MLLW) at the Sunset Beach NOAA subordinate tide station (station ID 9447951)....
Tags: Geomorphology,
Remote Sensing
This data release supersedes version 1, published in 2017 under https://doi.org/10.5066/F74M93HF. Please see Version_History_P9HG8UDS.txt below for more information. The San Clemente Dam, built in the 1920s on the Carmel River in Monterey County, California, was removed during 2014 and 2015. The dam-removal project was the largest in California to date, and one of the largest in the U.S. This USGS data release presents data collected before, during, and after the removal of the dam. The data were collected to study how the river channel's topographic profiles and sediment distributions changed in response to new sediment supply after dam removal and base-level changes in the former San Clemente reservoir sediment...
This dataset consists of physics-based Delft3D model and Delwaq model input files used in modeling sediment deposition and concentrations around the coral reefs of west Maui, Hawaii. The Delft3D models were used to simulate waves and currents under small (SC1) and large (‘SC2’) wave conditions for current stream discharge (‘Alt1’) and stream discharge with watershed restoration (‘Alt3’). Delft3D model results were subsequently used as forcing conditions for Delwaq models to simulate sediment transport and dispersion. The Delwaq models were used to simulate sediment transport and concentrations under the same two wave and stream discharge scenarios. The Delwaq models were run using forcing conditions generated by...
Categories: Data;
Tags: CMHRP,
Coastal and Marine Hazards and Resources Program,
Environmental Health,
Geography,
Geomorphology,
High-resolution acoustic backscatter data, bathymetry data, single channel minisparker seismic-reflection data were collected by the U.S. Geological Survey (USGS) and the Alaska Department of Fish and Game in May of 2014 southwest of Chenega Island and southwest of Montague Island, Alaska. Data were collected aboard the Alaska Department of Fish and Game vessel, R/V Solstice, during USGS field activity 2014-622-FA, using a pole mounted 100-kHz Reson 7111 multibeam echosounder, a 500 Joule SIG 2-mille minisparker sound source and a single channel streamer.
An unmanned aerial system (UAS) was used to acquire high-resolution imagery of the intertidal zone at Puget Creek and Dickman Mill Park in Tacoma, Washington on June 3, 2019. This imagery was processed using structure-from-motion (SfM) photogrammetric techniques to derive high-resolution digital surface models (DSM), orthomosaic imagery, and topographic point clouds. In order to maximize the extent of the subaerially exposed area, the survey was timed to coincide with a spring low tide occurring at approximately 18:36 Universal Coordinated Time (UTC) (11:36 Pacific Daylight Time (PDT)), with an observed water level of -1.47 meters relative to the NAVD88 vertical datum at the Tacoma NOAA tide station (station ID...
Tags: Geomorphology,
Remote Sensing
This portion of the data release presents a digital surface model (DSM) and hillshade image of the intertidal zone at Lone Tree Point, Kiket Bay, WA. The DSM has a resolution of 4 centimeters per pixel and was derived from structure-from-motion (SfM) processing of aerial imagery collected with an unmanned aerial system (UAS) on 2019-06-05. Unlike a digital elevation model (DEM), the DSM represents the elevation of the highest object within the bounds of a cell. Vegetation, buildings and other objects have not been removed from the data. In addition, data artifacts resulting from noise in the original imagery have not been removed. The raw imagery used to create the DSM was acquired using a UAS fitted with a Ricoh...
This portion of the data release presents the locations of the temporary ground control points (GCPs) used for the structure-from-motion (SfM) processing of the imagery collected during the July 2021 unoccupied aerial system (UAS) surveys of the ocean beach at Fort Stevens State Park, OR, and Benson Beach at Cape Disappointment State Park, WA. Eighteen temporary ground control points (GCPs) were distributed throughout the survey area to establish survey control. The GCPs consisted of a combination of small square tarps with black-and-white cross patterns and "X" marks placed on the ground using temporary chalk. The GCP positions were measured using dual-frequency post-processed kinematic (PPK) GPS with corrections...
Categories: Data;
Tags: Bathymetry and Elevation,
Benson Beach,
CHMRP,
Cape Disappointment,
Clatsop County,
This bathymetric dataset provides an update to the stage-storage relation for Quail Lake (reservoir) located in the El Dorado National Forest, Calif. Bathymetric data was collected using a multibeam echo sounder to provide near-complete coverage and was merged with USGS 3DEP lidar to compute a DEM of the lake and near shore. The DEM was used to computed storage and surface area for a range of stage elevations. Results show that the spillway elevation was 6799.3 feet (NAVD88) and the crest elevation was 6802.5 feet (NAVD88). At the spillway elevation the storage was 141.74 ac-ft with a surface area of 14.20 ac. At the crest elevation the storage was 190.05 ac-ft with a surface area of 15.89 ac.
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: Bathymetric,
California,
Eldorado National Forest,
Geomorphology,
Hydrology,
This data set contains shoreline rate of change statistics for New York State coastal wetlands. Analysis was performed using the Digital Shoreline Analysis System (DSAS), created by U.S. Geological Survey, version 5.0, an extension for ArcMap. A reference baseline was used as the originating point for orthogonal transects cast by the DSAS software. The transects intersect each polyline vector shoreline establishing intersection measurement points, which were then used to calculate the rates of change. End-point rates, calculated by dividing the distance of shoreline movement by the time elapsed between the oldest and the most recent shoreline, were generated for wetlands where fewer than three historic shorelines...
Categories: Data;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Downloadable,
Map Service;
Tags: Digital Shoreline Analysis System,
End-Point Rate,
Geography,
Geomorphology,
Great South Bay,
Low altitude (300 meters above ground level (AGL)) digital aerial imagery were acquired on May 4 and 5, 2020, from a manned, fixed-wing aircraft using a Sony A7R 36 Megapixel digital camera, along with precise aircraft location Global Navigation Satellite System (GNSS) data. Data were collected in shore-parallel lines, flying at approximately 50 meters per second and capturing true color imagery at 1 Hertz, resulting in image footprints with approximately 75-80% endlap, 60-70% sidelap, and a ground sample distance (GSD) of 5.3 centimeters. The precise time of each image capture (flash event) was recorded, and the corresponding aircraft position was computed in post-processing from the aircraft navigation GNSS data;...
Low altitude (300 meters above ground level (AGL)) digital aerial imagery were acquired on June 11, 2022, from a manned, fixed-wing aircraft using a Sony A7R 36 Megapixel digital camera, along with precise aircraft location Global Navigation Satellite System (GNSS) data. Data were collected in shore-parallel lines, flying at approximately 50 meters per second and capturing true color imagery at 1 Hertz, resulting in image footprints with approximately 75–80% endlap, 60–70% sidelap, and a ground sample distance (GSD) of 5.3 centimeters. The precise time of each image capture (flash event) was recorded, and the corresponding aircraft position was computed in post-processing from the aircraft navigation GNSS data;...
This topobathymetric digital elevation model (TBDEM) mosaic represents the topography and bathymetry for the Milwaukee River Estuary in Milwaukee, Wisconsin and adjacent terrestrial and Lake Michigan nearshore coastal areas. The TBDEM was produced in support of modeling and for developing a physical habitat framework to help with understanding the effects from multidirectional currents and seiche effects associated with the mixing of river flows with Lake Michigan backwater. The TBDEM mosaic is built off existing terrestrial, nearshore, and estuary frameworks developed for other areas around the Great Lakes and the Milwaukee River Harbor. Ranging from 2008-2015, land elevations derived from lidar and historic topographic...
Two dams on the Elwha River, Washington State, USA trapped over 20 million m3 of sediment, reducing downstream sediment fluxes and contributing to erosion of the river's coastal delta. The removal of the Elwha and Glines Canyon dams between 2011 and 2014 induced massive increases in river sediment supply and provided an unprecedented opportunity to examine the response of a delta system to changes in sediment supply. The U.S. Geological Survey (USGS) developed an integrated research program aimed at understanding the ecosystem responses following dam removal. The research program included repeated surveys of beach topography, nearshore bathymetry, and surface sediment grain size to quantify changes in delta morphology...
This dataset contains catchment-averaged metrics of hypsometry and normalized channel steepness for selected catchments along the Powell River region in the Eastern Tennessee seismic zone. These data are associated with Table S1 in the Supplementary Material for the related manuscript: Thompson Jobe, J. A., R. W. Briggs, R. D. Gold, L. Bauer, and C. Collett (in review), Limited evidence of Late Pleistocene tectonic surface deformation in the Eastern Tennessee Seismic Zone, Tennessee, USA.
Categories: Data;
Tags: East Tennessee,
Tennessee (TN),
geomorphology,
geoscientificInformation,
tectonic geomorphology
These data are high-resolution bathymetry (riverbed elevation) and depth-averaged velocities in comma-delimited table format, generated from hydrographic and velocimetric surveys near highway bridge structures over the Missouri and Mississippi Rivers near St. Louis, Missouri, August 3–10, 2020. Hydrographic data were collected using a high-resolution multibeam echosounder mapping system (MBMS), which consists of a multibeam echosounder (MBES) and an inertial navigation system (INS) mounted on a marine survey vessel. Data were collected as the vessel traversed the river along planned survey lines distributed throughout the reach. Data collection software integrated and stored the depth data from the MBES and the...
The U.S. Geological Survey (USGS) Soil Sample Archive is a database of information describing soil and sediment samples collected in support of USGS science. Samples in the archive have been registered with International Generic Sample Numbers, relabeled with bar-coded sample labels, and repacked in containers for long-term preservation. Details of sample collection location, collection date, associated datasets, mass of remaining sample, storage locations, and other relevant information are tabulated here so that interested parties may identify associated datasets and search, sort, and gain access to archived samples.
This data release contains three spreadsheets that have aluminum-26 and beryllium-10 concentrations for samples collected in and near Sparta, North Carolina in 2021-2022. These samples were prepared for burial dating by the Reston Cosmogenic Nuclide (RECON) Lab and measured via accelerator mass spectrometry at the Purdue Rare Isotope Measurement (PRIME) Lab. The file “Sparta_SiteLocations_Odom.csv” contains site locations and interpreted ages; measurements of aluminum-26 and beryllium-10 and related data are located in respective .csv files.
This dataset is intended to provide seamless, integrated geologic mapping of the U.S. Intermountain West region as a contribution to The National Geologic Map supported by the National Cooperative Geologic Mapping Program of the U.S. Geological Survey. Surficial and bedrock geology are included in this data release as independent datasets at a variable resolution from 1:50,000 to 1:250,000 scale. No original interpretations are presented in this dataset; rather, all interpretive data are assimilated from referenceable publications. Derivative polygon features created for this dataset demonstrate the distribution of SIGMa-GeMS Geologic Provinces derived from the distribution of map units. Initial contributions to...
|
|
