Filters: Tags: multibeam (X) > Categories: Data (X) > partyWithName: U.S. Geological Survey - ScienceBase (X) > Extensions: Shapefile (X)
9 results (9ms)|
Filters
Date Range
Types Contacts
Tag Types Tag Schemes |
In 2009, the Kootenai Tribe of Idaho released and implemented the Kootenai River Habitat Restoration Master Plan. This plan aimed to restore, enhance, and maintain the Kootenai River habitat and landscape to support and sustain habitat conditions for aquatic species and animal populations. In support of these restoration efforts, the U.S. Geological Survey, in cooperation with the Kootenai Tribe of Idaho, conducted high-resolution multibeam echosounder bathymetric surveys as a baseline bathymetric monitoring survey on the Kootenai River near Bonners Ferry, Idaho. Three channel patterns or reaches exist in the study area: braided, meander, and a transitional zone connecting the braided and meander reaches. Bathymetric...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: ASCII,
Bathymetry,
Bonners Ferry,
Geology,
Hypack,
This dataset contains a map of the bathymetric contours of Morris Lake (Newton Reservoir) at 2-foot intervals of elevation.
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Geospatial Applications,
Hydrogeologic Characterization,
Morris Lake,
New Jersey,
Newton,
The Hudson Canyon begins on the outer continental shelf off the east coast of the United States at about 100-meters (m) water depth and extends offshore southeastward across the continental slope and rise. A multibeam survey was carried out in 2002 to map the bathymetry and backscatter intensity of the sea floor of the Hudson Canyon and adjacent slope and rise. The survey covered an area approximately 205 kilometers (km) in the offshore direction, extending from about 500 m to about 4,000 m water depth, and about 110 km in the alongshore direction, centered on the Hudson Canyon. The sea floor was mapped using a SeaBeam Instruments 2112 multibeam echosounder aboard the National Oceanic and Atmospheric Administration...
This dataset contains a map of the bathymetric contours of Morris Lake (Newton Reservoir) at 2-foot intervals of depth.
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Geospatial Applications,
Hydrogeologic Characterization,
Morris Lake,
New Jersey,
Newton,
This data release contains GIS data generated by USGS for use in a BOEM-funded project to compare natural rockfish nursery habitat to habitat created by manmade structures in the eastern Santa Barbara Channel. The contours were created from published data and digital elevation models (DEMs) of Carignan and others (2009) and Dartnell and others (2012). Contours were generated using the ESRI Contour tool in spatial analysit. The contour interval is 10 meters. The contours were clipped to exclude areas outside the BOEM rockfish nurseries study area. Dartnell, P., Finlayson, D.P., Ritchie, A.C., Cochrane, G.R., and Erdey, M.D., 2012, Bathymetry and acoustic backscatter-outer mainland shelf, eastern Santa Barbara Channel,...
Categories: Data;
Types: Citation,
Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: BOEM,
Bathymetry,
Bathymetry and Elevation,
CMGP,
Multibeam,
This dataset contains the point depth measurements used for quality assurance of the bathymetric survey of Morris Lake conducted in April 2018.
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Geospatial Applications,
Hydrogeologic Characterization,
Morris Lake,
New Jersey,
Newton,
Marine geophysical mapping of the Queen Charlotte Fault in the eastern Gulf of Alaska was conducted in 2016 as part of a collaborative effort between the U.S. Geological Survey and the Alaska Department of Fish and Game to understand the morphology and subsurface geology of the entire Queen Charlotte system. The Queen Charlotte fault is the offshore portion of the Queen Charlotte-Fairweather Fault: a major structural feature that extends more than 1,200 kilometers from the Fairweather Range of southern Alaska to northern Vancouver Island, Canada. The data published in this data release were collected along the Queen Charlotte Fault between Cross Sound and Noyes Canyon, offshore southeastern Alaska from May 18 to...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: ADFG,
Alaska Department of Fish and Game,
Baranof Fan,
Baranof Island,
CMHRP,
This data release contains data from the USGS field activity 2014-607-FA, a survey of the Oregon Outer Continental Shelf (OCS) Floating Wind Farm Site in 2014.The bathymetry raster was generated from bathymetry data collected by U.S. Geological Survey (USGS) during the period from August 20 to September 1, 2014 using a Reson 7111 multibeam echosounder. The mapping mission collected bathymetry data from about 163 m to 566 m depths on the Oregon outer continental shelf. The acquisition was funded by the U.S. Bureau of Ocean Energy Management. Contours were generated using the ESRI Contour tool in spatial analysit. The contour interval is 10 meters.
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Backscatter,
Bathymetry,
Bathymetry and Elevation,
CMGP,
Coos Bay,
The Hudson Canyon begins on the outer continental shelf off the east coast of the United States at about 100-meters (m) water depth and extends offshore southeastward across the continental slope and rise. A multibeam survey was carried out in 2002 to map the bathymetry and backscatter intensity of the sea floor of the Hudson Canyon and adjacent slope and rise. The survey covered an area approximately 205 kilometers (km) in the offshore direction, extending from about 500 m to about 4,000 m water depth, and about 110 km in the alongshore direction, centered on the Hudson Canyon. The sea floor was mapped using a SeaBeam Instruments 2112 multibeam echosounder aboard the National Oceanic and Atmospheric Administration...
|
|
