Skip to main content
Advanced Search

Filters: Tags: dem (X) > partyWithName: U.S. Geological Survey - ScienceBase (X) > partyWithName: U.S. Geological Survey (X)

32 results (57ms)   

Filters
Date Range
Extensions
Types
Contacts
Categories
Tag Types
Tag Schemes
View Results as: JSON ATOM CSV
thumbnail
This dataset is comprised of three files containing northing, easting, and elevation ("XYZ") information for light detection and ranging (LiDAR) data representing beach topography and sonar data representing near-shore bathymetry of Lake Superior at Minnesota Point, Duluth, Minnesota. The point data is the same as that in LAS (industry-standard binary format for storing large point clouds) files that were used to create a digital elevation model (DEM) of the approximately 5.9 square kilometer (2.3 square mile) surveyed area. LiDAR data were collected August 10, 2019 using a boat-mounted Optech ILRIS scanner and methodology similar to that described by Huizinga and Wagner (2019). Multi-beam sonar data were collected...
thumbnail
This dataset is a digital elevation model (DEM) of the beach topography of Lake Superior at Minnesota Point, Duluth, Minnesota. The DEM has a 1-meter (m; 3.28084 foot [ft]) cell size and was created from a LAS (industry-standard binary format for storing large point clouds) dataset of terrestrial light detection and ranging (LiDAR) data with an average point spacing of 0.137 m (0.45 ft). LiDAR data were collected August 10, 2019 using a boat-mounted Optech ILRIS scanner and methodology similar to that described by Huizinga and Wagner (2019). References: Huizinga, R.J. and Wagner, D.M., 2019, Erosion monitoring along selected bank locations of the Coosa River in Alabama using terrestrial light detection and ranging...
thumbnail
Located in the northern tropical Pacific Ocean, Majuro is the capital of the Republic of the Marshall Islands. Majuro Atoll consists of a large, narrow landmass and a set of smaller perimeter islands surrounding a lagoon that is over 100 square miles in size. The waters surrounding the Majuro Atoll land areas are relatively shallow with poorly mapped bathymetry. However, the Pacific Ocean on the exterior of the coral atoll and the lagoon within its interior consist of deep bathymetry with steep slopes. The highest elevation of the Majuro Atoll is estimated at only 3-meters above sea level, which is the island community of Laura located on the western part of the atoll. At the eastern edge of the atoll lies the capital...
Categories: Data; Tags: 3D Elevation Program, 3DEP, American Society of Photogrammetry and Remote Sensing, Base Maps, Bathymetric, All tags...
thumbnail
This dataset is a digital elevation model (DEM) of the beach topography and near-shore bathymetry of Lake Superior at Minnesota Point, Duluth, Minnesota. The DEM has a 10-meter (m; 32.8084 feet) cell size and was created from a LAS (industry-standard binary format for storing large point clouds) dataset of terrestrial light detection and ranging (LiDAR) data representing the beach topography and sonar data representing the bathymetry to approximately 1.3 kilometers (0.8 miles) offshore. Average point spacing of the LAS files in the dataset are as follows: LiDAR, 0.137 m; multi-beam sonar, 1.029 m; single-beam sonar, 0.999 m. LiDAR data were collected August 10, 2019 using a boat-mounted Optech ILRIS scanner and...
thumbnail
The catastrophic, explosive eruption of Mount St. Helens, Washington, on May 18, 1980, is the most well-known eruption of the volcano. Less well known is the May 18th eruption marked the beginning of a period of eruptive activity that lasted through 1986. From October 1980 through October 1986, a series of 17 dome-building episodes added millions of cubic meters of lava to the crater floor. Most of the growth occurred when magma extruded onto the surface of the dome, forming short (650 to 1,300 feet), thick (65 to 130 feet) lava flows. This data release is a 1-meter resolution digital elevation model (DEM) and a corresponding hillshade raster derived from a previously unpublished 1:2,000 scale topographic contour...
thumbnail
This dataset is a LAS (industry-standard binary format for storing large point clouds) dataset containing light detection and ranging (LiDAR) data and sonar data representing the beach and near-shore topography of Lake Superior at Minnesota Point, Duluth, Minnesota. Average point spacing of the LAS files in the dataset are as follows: LiDAR, 0.137 meters (m); multi-beam sonar, 1.029 m; single-beam sonar, 0.999 m. The LAS dataset was used to create a 10-m (32.8084 feet) digital elevation model (DEM) of the approximately 5.9 square kilometer (2.3 square mile) surveyed area using the "LAS dataset to raster" tool in Esri ArcGIS, version 10.7. LiDAR data were collected August 10, 2019 using a boat-mounted Optech ILRIS...
thumbnail
This is a collection of 3 ft resolution digital elevation model derived from light detection and ranging (lidar). Lidar was collected in 2002, 2008, 2013, and 2018. Coverage includes a portion of Clarksburg, Maryland, focused around the Clarksburg Special Protection Area (CSPA). Overall extent varies between each dataset, but all digital elevation models are aligned together with consistent overlap over the study area watersheds.
thumbnail
The Louisiana State Legislature created Coastal Wetlands Planning, Protection, and Restoration Act (CWPPRA) in order to conserve, restore, create and enhance Louisiana's coastal wetlands. The wetland restoration plans developed persuant to these acts specifically require an evaluation of the effectiveness of each coastal wetlands restoration project in achieving long-term solutions to arresting coastal wetlands loss. This data set includes mosaicked aerial photographs for the Atchafalaya Sediment Delivery (AT-02) project for 2016. This data set is used as a basemap for habitat classification. It also serves as a visual tool for project managers to help them identify any obvious problems or land loss within their...
thumbnail
To support the modeling of storm-induced flooding, the USGS Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for the Central California Coast. High-resolution coastal elevation data is required to identify flood, hurricane, and sea-level rise inundation hazard zones and other earth science applications, such as the development of sediment transport and storm surge models. The new TBDEM consists of the best available multi-source topographic and bathymetric elevation data for the onshore and offshore areas in Central California. The Central California TBDEM integrates 70 different topographic and bathymetric data sources...
thumbnail
Bathymetric, topographic, and grain-size data were collected from May 2013 to October 2016 along a 15-mi reach of the Colorado River in Glen Canyon National Recreation Area, Arizona by the U.S. Geological Survey Grand Canyon Monitoring and Research Center. The study reach is located from river miles -15 at the base of Glen Canyon Dam to 0 at Lees Ferry. Channel bathymetry was mapped using multibeam bathymetry collected in November 2014 and single beam bathymetry collected in February 2015, August 2015, February 2016, and June 2016. Subaerial topography was mapped using photogrammetry derived from aerial Imagery collected in May 2013 and ground-based total-stations collected in February 2015, October 2015, and October...
Tags: 1-m resolution, Arizona, Colorado River, DEM, Geography, All tags...
thumbnail
This section of the data release includes the topobathymetric elevation dataset of Great Salt Lake as an assimilated raster comprising interpolated bathymetry from 2005 and 2006 (Baskin, 2005; Baskin, 2006) and QL1 and QL2 lidar from 2016 (Utah Geospatial Resource Center, 2016). The bathymetric dataset was originally published as contour maps. The contours were interpolated to develop a digital elevation model that is readable by a geographic information system and compatible with topographic lidar data generated in 2016. Because the water elevation of Great Salt Lake has declined since 2005, regions of the bathymetric and lidar datasets overlap to provide a reasonable estimate of error. The topobathymetric dataset...
thumbnail
The Louisiana State Legislature created Coastal Wetlands Planning, Protection, and Restoration Act (CWPPRA) in order to conserve, restore, create and enhance Louisiana's coastal wetlands. The wetland restoration plans developed pursuant to these acts specifically require an evaluation of the effectiveness of each coastal wetlands restoration project in achieving long-term solutions to arresting coastal wetlands loss. This data set includes mosaicked aerial photographs for the GIWW (Gulf Intracoastal Waterway) to Clovelly Hydrologic Restoration (BA-02) project for 2016. This data is used as a basemap land/water classification. It also serves as a visual tool for project managers to help them identify any obvious...
thumbnail
The Louisiana State Legislature created Coastal Wetlands Planning, Protection and Restoration Act (CWPPRA) in order to conserve, restore, create and enhance Louisiana's coastal wetlands. The wetland restoration plans developed pursuant to these acts specifically require an evaluation of the effectiveness of each coastal wetlands restoration project in achieving long-term solutions to arresting coastal wetlands loss. This data set includes mosaicked aerial photographs for the Marsh Island Hydrologic Restoration (TV-14) project for 2016. This data is used as a basemap land-water classification. It also serves as a visual tool for project managers to help them identify any obvious problems or land loss within their...
thumbnail
To support the modeling of storm-induced flooding, the USGS Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for the Northern California Coast. High-resolution coastal elevation data is required to identify flood, hurricane, and sea-level rise inundation hazard zones and other earth science applications, such as the development of sediment transport and storm surge models. This TBDEM consists of the best available multi-source topographic and bathymetric elevation data for the onshore and offshore areas in Northern California. The Northern California TBDEM integrates 26 different topographic and bathymetric data sources...
Tags: 3D Elevation Program, 3DEP, Acoustic Sonar, Bathymetric, Bathymetry, All tags...
thumbnail
Mount Adams, also known by the Native American names "Klickitat" or "Pahto", is a 3,742 meter-tall (12,278 feet) stratovolcano located 53 km (33 miles) north of the Columbia river straddling the borders of Skamania County, Yakima County and the Yakama Nation Reservation. Mount Adams lies in the middle of the Mount Adams volcanic field—a 1,250 square kilometer area (about 480 square miles) comprising at least 120, mostly basaltic volcanoes that form spatter and scoria cones, shield volcanoes, and some extensive lava flows. The volcanic field has been active for at least the past one million years. Mount Adams was active from about 520,000 to about 1,000 years ago and has erupted mostly andesite. Eruptions have occurred...
thumbnail
This dataset is a LAS (industry-standard binary format for storing large point clouds) dataset containing light detection and ranging (LiDAR) data representing beach topography of Lake Superior at Minnesota Point, Duluth, Minnesota. Average point spacing of the LiDAR points in the dataset is 0.137 meters (m; 0.45 feet [ft]). The LAS dataset was used to create a 1-m (3.28084 ft) digital elevation model (DEM) of the approximately 4 kilometer (2.5 mile) surveyed reach of the beach. LiDAR data were collected August 10, 2019 using a boat-mounted Optech ILRIS scanner and methodology similar to that described by Huizinga and Wagner (2019). References: Huizinga, R.J. and Wagner, D.M., 2019, Erosion monitoring along selected...
thumbnail
Topography provides information about the structural controls of the Great Basin and therefore information that may be used to identify favorable structural settings for geothermal systems. Specifically, local relative topography gives information about locations of faults and fault intersections relative to mountains, valleys, or at the transitions between. As part of U.S. Geological Survey efforts to engineer features that are useful for predicting geothermal resources, we construct a detrended elevation map that emphasizes local relative topography and highlights features that geologists use for identifying geothermal systems (i.e., providing machine learning algorithms with features that may improve predictive...
thumbnail
The catastrophic, explosive eruption of Mount St. Helens, Washington, on May 18, 1980, is the most well-known eruption of the volcano. Less well known is the May 18th eruption marked the beginning of a period of eruptive activity that lasted through 1986. From October 1980 through October 1986, a series of 17 dome-building episodes added millions of cubic meters of lava to the crater floor. Most of the growth occurred when magma extruded onto the surface of the dome, forming short (650 to 1,300 feet), thick (65 to 130 feet) lava flows. This data release is a 2-meter resolution digital elevation model (DEM) and hillshade raster derived from a previously unpublished 1:4,000 scale topographic contour map, based on...
thumbnail
Topobathy was surveyed during the fall of 2022 for two locations along Minnesota Point, where past beach nourishment (dredge materials) were placed. These topobathymetric surveys of Minnesota Point and Lake Superior are repeat surveys that will be used evaluate movement of placed material and overall change of near-shore bathymetry. The data was acquired using a lidar sensor, and single-beam and multibeam sonars. The data includes DEMs of the terrestrial beach areas and near-shore bathymetries of Lake Superior near the Duluth and Superior entries of Minnesota Point, 2-foot smoothed contours, LAS and XYZ files. Data were collected in cooperation with the U.S. Army Corps of Engineers (USACE), Detroit District.


map background search result map search result map One Meter Topobathymetric Digital Elevation Model for Majuro Atoll, Republic of the Marshall Islands, 1944 to 2016 Atchafalaya sediment delivery (AT-02): 2016 habitat classification Topobathymetric Model for the Central Coast of California, 1929 to 2017 GIWW (Gulf Intracoastal Waterway) to Clovelly Hydrologic Restoration (BA-02): 2016 land-water classification Marsh Island Hydrologic Restoration (TV-14): 2016 land-water classification High-resolution digital elevation model for Mount Adams and vicinity, Washington, based on lidar surveys of August-September, 2016 Beach topography and near-shore bathymetry of Lake Superior at Minnesota Point, Duluth, MN, August 2019 LAS dataset of LiDAR and sonar data collected at Lake Superior at Minnesota Point, Duluth, MN, August 2019 Digital elevation model (DEM) of beach topography of Lake Superior at Minnesota Point, Duluth, MN, August 2019 LAS dataset of LiDAR data collected at Lake Superior at Minnesota Point, Duluth, MN, August 2019 XYZ files of LiDAR and sonar data collected at Lake Superior at Minnesota Point, Duluth, MN, August 2019 Topobathymetric Model of Northern California, 1986 to 2019 Channel mapping Glen Canyon Dam to Lees Ferry in Glen Canyon National Recreation Area, Arizona - Data Lidar-derived digital elevation models in Clarksburg, MD representing the years 2002, 2008, 2013, and 2018 Great Salt Lake TBDEM Spatial Metadata Great Salt Lake TBDEM GeoTIFF Minnesota Point beach topography and near-shore bathymetry surveys of Lake Superior, Duluth, MN, August - November 2022 Maps of elevation trend and detrended elevation for the Great Basin, USA Digital elevation model of the lava dome in the crater of Mount St. Helens, November 12, 1986 Digital elevation model of the lava dome in the crater of Mount St. Helens on October 20, 1988 Digital elevation model of the lava dome in the crater of Mount St. Helens, November 12, 1986 Digital elevation model of the lava dome in the crater of Mount St. Helens on October 20, 1988 Atchafalaya sediment delivery (AT-02): 2016 habitat classification Digital elevation model (DEM) of beach topography of Lake Superior at Minnesota Point, Duluth, MN, August 2019 LAS dataset of LiDAR data collected at Lake Superior at Minnesota Point, Duluth, MN, August 2019 LAS dataset of LiDAR and sonar data collected at Lake Superior at Minnesota Point, Duluth, MN, August 2019 XYZ files of LiDAR and sonar data collected at Lake Superior at Minnesota Point, Duluth, MN, August 2019 Beach topography and near-shore bathymetry of Lake Superior at Minnesota Point, Duluth, MN, August 2019 Lidar-derived digital elevation models in Clarksburg, MD representing the years 2002, 2008, 2013, and 2018 Minnesota Point beach topography and near-shore bathymetry surveys of Lake Superior, Duluth, MN, August - November 2022 Channel mapping Glen Canyon Dam to Lees Ferry in Glen Canyon National Recreation Area, Arizona - Data Marsh Island Hydrologic Restoration (TV-14): 2016 land-water classification GIWW (Gulf Intracoastal Waterway) to Clovelly Hydrologic Restoration (BA-02): 2016 land-water classification One Meter Topobathymetric Digital Elevation Model for Majuro Atoll, Republic of the Marshall Islands, 1944 to 2016 Great Salt Lake TBDEM GeoTIFF High-resolution digital elevation model for Mount Adams and vicinity, Washington, based on lidar surveys of August-September, 2016 Great Salt Lake TBDEM Spatial Metadata Topobathymetric Model for the Central Coast of California, 1929 to 2017 Topobathymetric Model of Northern California, 1986 to 2019 Maps of elevation trend and detrended elevation for the Great Basin, USA