Skip to main content
Advanced Search

Filters: Tags: {"type":"USGS Scientific Topic Keyword","name":"marine geology"} (X) > partyWithName: Pacific Coastal and Marine Science Center (X)

76 results (2.2s)   

View Results as: JSON ATOM CSV
To further extend the scope of the Science Application for Risk Reduction (SAFRR) project, detailed hydrodynamic simulations were run at three harbor locations in California. For the locations of 1) Oakland/Alameda, 2) Half Moon Bay, and 3) Santa Cruz, simulations at approximately 5-m resolution were performed using the high-order Boussinesq-type model COULWAVE. The Oakland/Richmond simulation area focuses on the major port facilities in the area and the Half Moon Bay and Santa Cruz simulations focus on Pillar Point Harbor and Santa Cruz Harbor, respectively.
thumbnail
Note: This data release has been superseded, available here: https://doi.org/10.5066/P9MYL7WJ This data release contains processed high-resolution multichannel sparker seismic-reflection (MCS) data that were collected aboard Humboldt State University’s R/V Coral Sea in October of 2018 on U.S. Geological Survey cruise 2018-658-FA on the shelf and slope between Cape Blanco, Oregon, and Cape Mendocino, California. MCS data were collected to characterize quaternary deformation and sediment dynamics along the southern Cascadia margin.
thumbnail
This dataset consists of physics-based Delft3D model and Delwaq model input files used in modeling sediment deposition and concentrations around the coral reefs of west Maui, Hawaii. The Delft3D models were used to simulate waves and currents under small (SC1) and large (‘SC2’) wave conditions for current stream discharge (‘Alt1’) and stream discharge with watershed restoration (‘Alt3’). Delft3D model results were subsequently used as forcing conditions for Delwaq models to simulate sediment transport and dispersion. The Delwaq models were used to simulate sediment transport and concentrations under the same two wave and stream discharge scenarios. The Delwaq models were run using forcing conditions generated by...
thumbnail
RBRduo pressure and temperature sensors, mounted on aluminum frames, were moored in shallow (< 6 m) water depths in Skagit and Bellingham Bays, Washington, USA, from December 2017 to February 2018, to capture wave heights and periods. Continuous pressure fluctuations are transformed into surface-wave observations of wave heights, periods, and frequency spectra at 30-minute intervals.
thumbnail
High-resolution single-channel Chirp and minisparker seismic-reflection data were collected by the U.S. Geological Survey in September and October 2006, offshore Bolinas to San Francisco, California. Data were collected aboard the R/V Lakota, during field activity L-1-06-SF. Chirp data were collected using an EdgeTech 512 chirp subbottom system and were recorded with a Triton SB-Logger. Minisparker data were collected using a SIG 2-mille minisparker sound source combined with a single-channel streamer, and both were recorded with a Triton SB-Logger.
thumbnail
High-resolution acoustic backscatter data, bathymetry data, single channel minisparker seismic-reflection data were collected by the U.S. Geological Survey (USGS) and the Alaska Department of Fish and Game in May of 2014 southwest of Chenega Island and southwest of Montague Island, Alaska. Data were collected aboard the Alaska Department of Fish and Game vessel, R/V Solstice, during USGS field activity 2014-622-FA, using a pole mounted 100-kHz Reson 7111 multibeam echosounder, a 500 Joule SIG 2-mille minisparker sound source and a single channel streamer.
This data release includes the results of analysis of video data conducted by Oregon State University and the geo-habitat interpretation of multibeam echo sounder (MBES) data conducted by the USGS. The data were collected in 2014 and were published in Cochrane and others (2015). This data release accompanies report that describes the project and results in detail (Cochrane and others, 2017). All the data are provided as geographic information system (GIS) files that contain both Esri ArcGIS geotiffs or shapefiles. For those who do not own the full suite of Esri GIS and mapping software, the data can be read using Esri ArcReader, a free viewer that is available at http://www.esri.com/software/arcgis/arcreader/index.html...
Categories: Data; Tags: Marine Geology
thumbnail
This data release includes representative cluster profiles (RCPs) from a large (>24,000) selection of coral reef topobathymetric cross-shore profiles (Scott and others, 2020). We used statistics, machine learning, and numerical modelling to develop the set of RCPs, which can be used to accurately represent the shoreline hydrodynamics of a large variety of coral reef-lined coasts around the globe. In two stages, the data were reduced by clustering cross-shore profiles based on morphology and hydrodynamic response to typical wind and swell wave conditions. By representing a large variety of coral reef morphologies with a reduced number of RCPs, a computationally feasible number of numerical model simulations can be...
thumbnail
This data release contains 25 multichannel minisparker seismic reflection (MCS) profiles and 41 chirp sub-bottom profiles that were collected in February of 2016 from the Catalina Basin offshore southern California by the U.S. Geological Survey Pacific and Coastal Marine Science Center in cooperation with the University of Washington. Data were collected aboard the University of Washington’s R/V Thomas G. Thompson on USGS cruise 2016-616-FA. MCS profiles were collected to image the Catalina and San Clemente fault systems as well as the San Gabriel Canyon and Channel system.
This dataset contains information on the probabilities of storm-induced erosion (collision, inundation and overwash) for each 100-meter (m) section of the United States Pacific coast for return period storm scenarios. The analysis is based on a storm-impact scaling model that uses observations of beach morphology combined with sophisticated hydrodynamic models to predict how the coast will respond to the hydrodynamic forcing. Storm-induced water levels, due to both surge and waves, are compared to coastal elevations to determine the probabilities of three types of coastal change: collision (dune erosion), overwash, and inundation. Data on morphology (dune crest and toe elevation) and hydrodynamics (storm surge,...
thumbnail
High-resolution multichannel minisparker, multichannel boomer and chirp seismic-reflection data were collected by the U.S. Geological Survey and the University of Washington in February of 2017 west of Seattle in Puget Sound and in Lake Washington, Washington. Data were collected aboard University of Washington’s R/V Clifford A. Barnes during USGS field activity 2017-612-FA. Sub-bottom acoustic penetration spans several hundreds of meters and is variable by location. Data were collected to characterize recent deformation and estimate earthquake recurrence on the Seattle Fault zone. These data and information are intended for science researchers, students from elementary through college, policy makers, and general...
thumbnail
Geochemical analysis of authigenic carbonates from the Cascadia Subduction Zone. Powdered carbonate samples for stable carbon (delta-C-13) and oxygen (delta-O-18) isotopes and carbonate phase were analyzed as a proxy for potential fluid sources, and to better understand how process, such as mixing, and oxidation, can alter the initial fluid isotopic composition and the archived fluid-source signature in the authigenic carbonates.
thumbnail
High-resolution multichannel minkisparker seismic-reflection (MCS) profiles were collected by the U.S. Geological Survey in September and October of 2016 from the northern portion of the Santa Barbara Basin offshore southern California. Data were collected aboard the USGS R/V Parke Snavely and NOAA R/V Shearwater during field activity 2016-666-FA. Data were acquired to support USGS geologic hazards projects to aide hazard assessment within the Santa Barbara Basin. High-resolution multichannel minisparker seismic-reflection, multibeam-bathymetry and acoustic-backscatter data were collected to investigate the causes and consequences of submarine landslides in the Santa Barbara Basin. These data and information are...
This data release provides flooding extent polygons and flood depth rasters (geotiffs) based on sea-level rise and wave-driven total water levels for the coast of the most populated Hawaiian, Mariana, and American Samoan Islands. Oceanographic, coastal engineering, ecologic, and geospatial data and tools were combined to evaluate the increased risks of storm-induced coastal flooding due to climate change and sea-level rise. We followed risk-based valuation approaches to map flooding due to waves and storm surge at 10 square meter resolution along these islands’ coastlines for annual (1-year), 20-year, and 100-year return-interval storm events and +0.25 m, +0.50 m, +1.00 m, +1.50 m, +2.00 m, and +3.00 m sea-level...
Categories: Data; Tags: CMHRP, Climate Change, Climatology, Coastal Processes, Coastal and Marine Hazards and Resources Program, All tags...
thumbnail
This data release provides the locations and certain key metrics of landslide features offshore southern California, including landslide perimeters, scarps, evacuation zones, debris aprons, and slide-prone areas in geographic information system (GIS) shapefile format. The offshore region of southern California is a tectonically active area that includes more than 20 fault-bounded basins and ridges that are subject to various types of mass-wasting and landslide processes. The collection of high-resolution seafloor mapping data offshore southern California, mostly within the last 25 years, provide a new data set that forms the basis for the identification and mapping of landslides and slide-related features throughout...
thumbnail
In February 2016 the University of Washington in cooperation with the U.S. Geological Survey, Pacific Coastal and Marine Science Center (USGS, PCMSC) collected multibeam bathymetry and acoustic-backscatter data in and near the Catalina Basin, southern California aboard the University of Washington's Research Vessel Thomas G. Thompson. Data was collected using a Kongsberg EM300 multibeam echosounder hull-mounted to the 274-foot R/V Thomas G. Thompson. The USGS, PCMSC processed these data and produced a series of bathymetric surfaces and acoustic-backscatter images for scientific research purposes. This data release provides a 10-m resolution bathymetry surface and a 10-m resolution acoustic backscatter image. In...
thumbnail
This data set consists of physics-based Delft3D-FLOW and SWAN hydrodynamic models input files used to study the wave-induced 3D flow over spur-and-groove (SAG) formations. SAG are a common and impressive characteristic of coral reefs. They are composed of a series of submerged shore-normal coral ridges (spurs) separated by shore-normal patches of sediment (grooves) on the fore reef of coral reef environments. Although their existence and geometrical properties are well documented, the literature concerning the hydrodynamics around them is sparse. Here, the three-dimensional flow patterns over SAG formations, and a sensitivity of those patterns to waves, currents, and SAG geometry were examined. Shore-normal shoaling...
thumbnail
This data release compiles element composition data for more than 600 deep-ocean mineral samples from more than 25 research cruises in the Pacific Ocean since 1979 that involved USGS researchers. Deep-ocean mineral sample types encompassed in this data release include ferromanganese crusts, manganese nodules, phosphorites, and hydrothermal minerals. This data release is comprised of both unpublished as well as previously published data and reports and includes analytical methods and instrument detection limits whenever available.
thumbnail
This data release provides bathymetric change grids of four geographic areas of San Francisco Bay, California, comparing digital elevation models (DEMs) created from bathymetric data collected in the 1970s and 1980s with DEMs created from bathymetric data collected in the 2010s and 2020. These types of change analyses can provide information on the quantities and patterns of erosion and deposition in San Francisco Bay over the 9 to 47 years between surveys, and they reveals that the bay floor lost about 34 million cubic meters of sediment between the intervening time period. Results from this study can be used to assess how San Francisco Bay has responded to changes in the system such as sea-level rise and variation...
thumbnail
A set of physics-based XBeach Non-hydrostatic hydrodynamic model simulations (with input files here included) were used to evaluate how varying carbonate budgets, and thus coral reef accretion and degradation, affect alongshore variations in wave-driven water levels along the adjacent shoreline of Buck Island Reef National Monument (BUIS) for a number of sea-level rise scenarios, specifically during extreme wave conditions when the risk for coastal flooding and the resulting impact to coastal communities is greatest. These input files accompany the modeling conducted for the following publication: Toth, L.T., Storlazzi, C.D., Kuffner, I.B., Quataert, E., Reyns, J., McCall, R.T., Stathakopoulos, A., Hillis-Starr,...


map background search result map search result map Multibeam bathymetry and acoustic-backscatter data collected in 2016 in Catalina Basin, southern California and merged multibeam bathymetry datasets of the northern portion of the Southern California Continental Borderland Chirp and minisparker seismic-reflection data of field activity L-1-06-SF collected offshore Bolinas to San Francisco, California from 2006-09-25 to 2006-10-03 Wave observations from nearshore bottom-mounted pressure sensors in Skagit and Bellingham Bays, Washington, USA from Dec 2017 to Feb 2018 Digital maps of submarine landslides and mass wasting features offshore of southern California Multichannel sparker seismic reflection data of USGS field activity 2018-658-FA collected between Cape Blanco and Cape Mendocino from 2018-10-04 to 2018-10-18 Multichannel minisparker and chirp seismic reflection data of USGS field activity 2016-616-FA collected in the Catalina Basin offshore southern California in February 2016 Modeled extreme total water levels along the U.S. west coast Model parameter input files to compare the influence of coral reef carbonate budgets on alongshore variations in wave-driven total water levels on Buck Island Reef National Monument Model parameter input files to compare effects of stream discharge scenarios on sediment deposition and concentrations around coral reefs off west Maui, Hawaii Marine mineral geochemical data - Part One: Pacific Ocean USGS-affiliated historical data Geochemistry of authigenic carbonates from Cascadia Margin Model parameter input files to compare the influence of coral reef carbonate budgets on alongshore variations in wave-driven total water levels on Buck Island Reef National Monument Model parameter input files to compare effects of stream discharge scenarios on sediment deposition and concentrations around coral reefs off west Maui, Hawaii Chirp and minisparker seismic-reflection data of field activity L-1-06-SF collected offshore Bolinas to San Francisco, California from 2006-09-25 to 2006-10-03 Multibeam bathymetry and acoustic-backscatter data collected in 2016 in Catalina Basin, southern California and merged multibeam bathymetry datasets of the northern portion of the Southern California Continental Borderland Multichannel minisparker and chirp seismic reflection data of USGS field activity 2016-616-FA collected in the Catalina Basin offshore southern California in February 2016 Geochemistry of authigenic carbonates from Cascadia Margin Multichannel sparker seismic reflection data of USGS field activity 2018-658-FA collected between Cape Blanco and Cape Mendocino from 2018-10-04 to 2018-10-18 Digital maps of submarine landslides and mass wasting features offshore of southern California Modeled extreme total water levels along the U.S. west coast Marine mineral geochemical data - Part One: Pacific Ocean USGS-affiliated historical data